DS-96256NI-I16/H - Dictaphone Hikvision - Free user manual and instructions
Find the device manual for free DS-96256NI-I16/H Hikvision in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Video Recorder (NVR) |
| Brand | Hikvision |
| Model | DS-96256NI-I16/H |
| Video Channels | 256 |
| Hard Drive Bays | 16 (SATA) |
| Max Storage Capacity | 128 TB (8 TB per bay) |
| Video Compression | H.265+/H.265/H.264+/H.264 |
| Recording Resolution | Up to 12 MP |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Power Consumption | ≤ 200 W (without HDDs) |
| Dimensions (W×D×H) | 448 × 430 × 132 mm |
| Weight | ≤ 10 kg (without HDDs) |
| Operating Temperature | -10 °C to +55 °C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Video Outputs | HDMI, VGA |
| Audio | 1-ch audio input, 1-ch audio output |
| Network Interface | 2 × Gigabit Ethernet ports (RJ-45) |
| USB Ports | 2 × USB 2.0, 1 × USB 3.0 |
| Alarm I/O | 16 alarm inputs, 8 alarm outputs |
| RAID Support | RAID 0/1/5/6/10 |
| Maintenance | Clean with dry cloth; ensure ventilation; use recommended HDDs |
| Safety | Use grounded power outlet; avoid moisture; do not block vents |
| Spare Parts | Hard drives, power supply unit, cooling fans (field-replaceable) |
| Reparability | Hot-swap HDDs; replaceable PSU and fans; user-serviceable |
Frequently Asked Questions - DS-96256NI-I16/H Hikvision
How to set up the NVR for the first time?
Connect the NVR to a monitor via HDMI or VGA, then connect power and network. Insert hard drives into the bays. Power on and follow the on-screen wizard to configure network, storage, and recording settings.
What hard drives are compatible?
Use surveillance-grade or enterprise SATA hard drives (e.g., WD Purple, Seagate SkyHawk). Maximum capacity per bay is 8 TB, supporting up to 128 TB total.
How to access the NVR remotely?
Enable Remote Access in the network settings. Use Hikvision's iVMS-4200 software or mobile app (Hik-Connect). Ensure port forwarding (default HTTP: 8000, RTSP: 554) or use P2P via serial number.
How to configure motion detection recording?
Go to Configuration > Event > Motion Detection. Select the camera, enable motion detection, draw detection regions, and set schedule. Under Recording, select motion detection as trigger.
What is the maximum number of cameras supported?
The DS-96256NI-I16/H supports up to 256 IP cameras with a total incoming bandwidth of 800 Mbps.
How to perform a factory reset?
Press and hold the reset button on the front panel (or rear) for 10 seconds while the NVR is powered on. Release when the system beeps. Alternatively, access the menu: System > Maintenance > Factory Defaults.
How to maintain the NVR?
Keep the NVR in a dust-free, well-ventilated area. Periodically check HDD health using Storage > HDD Management. Clean the exterior with a soft dry cloth. Do not use liquid cleaners.
Does this NVR support RAID?
Yes, it supports RAID 0, 1, 5, 6, and 10. Configure via Storage > RAID Management. Use identical drives for best performance.
What is the warranty period?
Hikvision offers a standard 2-year warranty for NVRs. Warranty covers manufacturing defects but not damage from misuse. Extended warranty may be available.
How to replace a failed hard drive?
The HDDs are hot-swappable. Unscrew the drive tray, remove the failed drive, insert a new one, and reformat it via Storage > HDD Management. The system will automatically rebuild RAID if configured.
User questions about DS-96256NI-I16/H Hikvision
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dictaphone in PDF format for free! Find your manual DS-96256NI-I16/H - Hikvision and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DS-96256NI-I16/H by Hikvision.