ULTIMATE SPEED UKLL 5 A1 - Car charger

UKLL 5 A1 - Car charger ULTIMATE SPEED - Free user manual and instructions

Find the device manual for free UKLL 5 A1 ULTIMATE SPEED in PDF.

📄 58 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ULTIMATE SPEED UKLL 5 A1 - page 5
View the manual : Dansk DA Deutsch DE English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeCar Charger with USB Charging and Ioniser
BrandUltimate Speed
ModelUKLL 5 A1
CategoryCar Charger
Input Voltage / Current12 V DC, max. 2.8 A
Output Voltage per USB Port5 V DC, max. 2.1 A
Total Output Currentmax. 4.2 A (both USB ports combined)
USB Ports2 x USB Type A
Ionisation FunctionYes, with On/Off switch and red LED indicator
Fuse TypeF4L/250 V (replaceable)
Power IndicatorWhite LED (operating), Red LED (ionisation on)
CompatibilityVehicles with 12 V cigarette lighter socket (negative ground)
Safety FeaturesOvercurrent protection, replaceable fuse, automatic shutdown if overheating
Warranty3 years
Dimensions (approx.)Not specified in manual
Weight (approx.)Not specified in manual
CleaningWipe with soft dry cloth; use mild detergent for stubborn dirt
StorageCool, dry place away from direct sunlight; remove from vehicle in extreme temperatures
DisposalDo not dispose with household waste; take to collection point per WEEE Directive

Frequently Asked Questions - UKLL 5 A1 ULTIMATE SPEED

How do I use the ionisation function?
Connect the car charger to the cigarette lighter. Press the On/Off switch (component 4) to turn on ionisation. The red LED (3) lights up. Press again to switch off.
Can I charge two devices simultaneously?
Yes, the car charger has two USB Type A ports. The total output is 4.2 A, which is shared between the two ports. Each port can deliver up to 2.1 A, so charging time may increase if both are used.
What should I do if the charger stops working?
First, check the connection to the cigarette lighter. If the white LED does not light up, the fuse may be blown. Replace the fuse (type F4L/250 V) as described in the manual. If the problem persists, contact customer service.
How do I replace the fuse?
Unscrew the screw insert (C) anticlockwise, remove the plug tip (B), pull out the old fuse (A), and insert a new fuse of type F4L/250 V. Reassemble in reverse order.
Is it safe to leave the charger plugged in when the car is off?
In vehicles where the cigarette lighter remains powered even with the ignition off, the charger may drain the battery over time. Disconnect it after use to avoid battery discharge.
Can I use the charger with a 24 V vehicle?
No, the charger is designed for 12 V DC systems only. Using it in a 24 V vehicle may damage the charger or cause a fire.
How should I clean the car charger?
Disconnect the charger from the cigarette lighter before cleaning. Use a soft, dry cloth. For stubborn dirt, use a lightly moistened cloth with mild detergent. Avoid getting moisture inside the device.
Does the charger support fast charging?
Yes, it features Smart Fast Charge technology, which reduces charging time for compatible devices by automatically providing the maximum available charging current.
What is the warranty period?
The product comes with a 3-year warranty from the date of purchase, covering material and production faults. Proof of purchase is required.
How do I dispose of the charger at the end of its life?
Do not dispose of it in household waste. Take it to a designated collection point for electronic waste in accordance with local regulations (WEEE Directive).

User questions about UKLL 5 A1 ULTIMATE SPEED

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Car charger in PDF format for free! Find your manual UKLL 5 A1 - ULTIMATE SPEED and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. UKLL 5 A1 by ULTIMATE SPEED.

USER MANUAL UKLL 5 A1 ULTIMATE SPEED

CAR ADAPTOR WITH USB CHARGING AND IONISER UKLL 5 A1

GB IE NI

CAR ADAPTOR WITH USB CHARGING AND IONISER

Operating instructions

DK

ADAPTER TIL BILEN MED USB-OPLADER

GB IE NI

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

DK

GB/IE/NI Operating instructions Page 1

Contents

Introduction....2

Information about these

operating instructions....2

Notes on trademarks ..... 2

Intended use....3

Warnings and symbols used ..... 3

Safety 5

Before use....7

Check package contents ..... 7

Description of components .....7

Handling and operation.....8

Ionisation function 8

Charging function....8

Troubleshooting ..... 10

Cleaning....11

Replacing the fuse ..... 11

Storage when not in use ..... 13

Disposal....13

Disposal of the appliance....13

Disposal of the packaging ..... 14

Appendix....14

Technical data 14

Kompernass Handels GmbH warranty .15

Service 18

Importer 18

Introduction

Information about these operating instructions

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operating instructions are part of this product. They contain important information on safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Keep these operating instructions as a reference and store them near the product. Please pass on all documentation incl. these operating instructions to any future owner(s) if you sell this product or give it away.

Notes on trademarks

USB ® is a registered trademark of USB Implementers Forum, Inc.

All other names and products may be trademarks or registered trademarks of their respective owner.

Intended use

This device is intended for charging and operating mobile devices with USB sockets. In addition, it also features an ionisation function which can be switched on and off. It is only intended for vehicles with a cigarette lighter whose negative pole is connected to earth. Any other use or use going beyond that described in these instructions is considered to be improper use and can lead to damage or injuries. The device is only for private use and is not intended for use in commercial or industrial environments. No claims of any kind will be accepted for damage arising as a result of incorrect use. The operator bears sole liability.

Warnings and symbols used

The following warnings are used in these operating instructions:

ULTIMATE SPEED UKLL 5 A1 - Warnings and symbols used - 1

DANGER

A warning at this hazard level indicates a potentially hazardous situation.

Failure to avoid this hazardous situation could result in severe injuries or even death.

▶ Follow the instructions in this warning notice to avoid the risk of serious injuries or death.

CAUTION

A warning at this hazard level indicates a risk of property damage.

Failure to avoid this situation could result in property damage.

▶ Follow the instructions in this warning to prevent property damage.

NOTE

▶ A note provides additional information that will assist you in using the device.

ULTIMATE SPEED UKLL 5 A1 - NOTE - 1

Smart Fast

Charge technology enables reduced charging times for compatible devices. Compatible connected devices automatically receive a signal to draw the maximum available charging current.

The E marking is a test mark for the labelling of components requiring approval in motor vehicles and states that the necessary tests have been carried out and that an ECE component approval has been issued.

Safety

To ensure safe operation of the device, follow the safety guidelines set out below:

This device is not intended for use by people (including children) with reduced physical, sensory or mental abilities or for those without experience and/or knowledge, unless they are supervised by a person responsible for their safety or they have been instructed in its use.

■ Children must be supervised to ensure that they do not play with the device.

■ Check the device for visible external damage before use. Do not use a device that has been damaged or dropped.

■ To avoid possible risks, arrange for damaged cables or connectors to be exchanged by an authorised specialist or the Customer Service Department.

■ Never open the device, and never carry out any repairs yourself.

■ Do not allow any liquids or moisture to get into the device.

■ Never subject the device to extreme heat or humidity. This particularly applies to storage in a car. If the car is stationary for extended periods and in hot weather with direct sunlight, high temperatures occur in the car interior and the glove compartment. Remove electrical and electronic devices from the vehicle.

■ Please also observe the operating instructions for your mobile device.

If you notice a burning smell or smoke coming from your device, disconnect it from the cigarette lighter immediately.

DANGER Under no circumstances should the smoke be inhaled as this could be harmful to your health.

All of the applicable laws in your location must be observed. Your hands must always be free to operate the vehicle safely when you are driving. Traffic safety must always take priority whilst driving. Use this cradle only if no hazard is likely to occur in any driving situation. Repairs to the device during the warranty period may only be carried out by a customer service department authorised by the manufacturer. Otherwise, no warranty claims will be accepted for any subsequent damage.

Before use

Check package contents

◆ Remove all parts and the operating instructions from the box.
◆ Remove all packaging material.

ULTIMATE SPEED UKLL 5 A1 - Check package contents - 1

DANGER

▶ Do not allow children to play with packaging materials. There is a risk of suffocation.

The following components are included in delivery:

● Car adaptor with USB charging and ioniser
• These operating instructions

NOTE

▶ Check the package for completeness and signs of visible damage.
If the delivery is incomplete or damage has occurred as a result of defective packaging or during transport, contact the service hotline (see section Service).

Description of components

① USB sockets, type A (2x)
② Air outlet (for ionised air)
3 Red LED (operating LED, ionisation)
4 On/Off switch

Handling and operation

Ionisation function

Connect the car charger to the on-board power supply (cigarette lighter) in your vehicle. The white LED in the housing indicates that the device is ready for operation. Depending on the vehicle type, it is possible that the ignition has to be switched on first.

◆ Press the On/Off switch ⏻4. The red LED ③ lights up and the device starts to ionise the air.

◆ Press the On/Off switch ⏻ 4 again to switch off the car charger.

Charging function

CAUTION

The maximum current output of each USB socket ① is 2.1 A.
The maximum current output of the car charger when both USB sockets ① are being used simultaneously is 4.2 A. The current output is divided according to the assignment of the USB ports ①.

Connect the car charger to the on-board power supply (cigarette lighter) in your vehicle. The white LED in the housing indicates that the device is ready for operation.

Connect the charging cable to one of the USB sockets 1 on the car charger and the USB connection on your mobile device. Charging starts immediately and is indicated on the display of the mobile device.

When charging is complete, disconnect the charging cable from the USB socket ① on the car charger. When you have finished using the car charger, disconnect it from the cigarette lighter.

CAUTION

In vehicles in which the cigarette lighter also works with the ignition switched off, the mobile device must be disconnected from the cigarette lighter after use. Otherwise, the vehicle battery may be discharged over a long period of time, since the device may also use power when it is idle.

NOTE

The device can be used simultaneously for ionising the air and for charging or operating mobile devices via the USB sockets ①.

Troubleshooting

A connected device will not charge (the white LED in the housing does not light up).

  • No connection to the car's cigarette lighter socket. Check the connection.
    ◆ Depending on the vehicle type, it is possible that the ignition has to be switched on first.
    ◆ Check whether the fuse of the car charger is defective and replace it if necessary (see section Replacing the fuse).

The white LED in the device housing goes out when a device is connected.

◆ Check whether the car charger fuse is defective and replace it if necessary (see section Replacing the fuse).

NOTE

▶ If you cannot solve the problem with the above-mentioned solutions, please contact the Service Hotline (see section Service).

Cleaning

CAUTION

▶ Always disconnect the device from the cigarette lighter during cleaning and when it is not being used.

CAUTION

Damage to the device!

▶ To avoid irreparable damage to the device, ensure that no moisture can get into it during cleaning.

If necessary, clean the device with a soft, dry cloth.

Use a lightly moistened cloth and a mild detergent to remove stubborn dirt residues.

Replacing the fuse

There is a fuse in the car charger for protecting the vehicle's on-board power supply. If the device stops working, check the fuse and replace it if necessary.

◆ Open the car charger by carefully un-screwing the screw insert (C) anticlockwise and removing it.

◆ Remove the plug tip (B) from the fuse (A) and pull out the fuse (A).
Now, insert a new fuse (A) of the type F4L/250 V into the car charger.
Place the plug tip (B) onto the slightly protruding end of the fuse (A) and screw the previously removed screw insert (C) back in.

Diagram showing three labeled components (A, B, C) of a mechanical or electrical component with internal structure and connection points.

DANGER

▶ Always use the same type of fuse. Otherwise there is a risk of fire.

NOTE

If the device still does not work or if the new fuse burns out immediately, the device is defective. Please contact the Service Hotline (see section Service).

Storage

CAUTION

The temperatures inside the vehicle can reach extreme values in summer and winter. To prevent heat damage, do not leave the device in the vehicle.

◆ Store the device somewhere clean, dry, free of dust and out of direct sunlight.

Disposal

Disposal of the appliance

ULTIMATE SPEED UKLL 5 A1 - Disposal of the appliance - 1

The adjacent symbol of a crossed-out wheelie bin means that this device is subject to Directive 2012/19/EU. This directive states

that this device may not be disposed of in normal household waste at the end of its useful life, but must be taken to a specially set-up collection point, recycling depot or disposal company.

This disposal is free of charge for the user. Protect the environment and dispose of this device properly.

ULTIMATE SPEED UKLL 5 A1 - This disposal is free of charge for the user. Protect the environment and dispose of this device properly. - 1

Your local community or municipal authorities can provide information on how to dispose of the worn-out product.

Disposal of the packaging

b a

Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings:

1-7: plastics,

20-22: paper and cardboard,

80-98: composites

Appendix

Technical data

Input voltage/ current12 V = (DC), max. 2.8 A
Output voltage/ current for each USB socket 15 V = (DC), max. 2.1 A
Total output voltage/current5 V = (DC), max. 4.2 A
USB sockets 1USB type A

This appliance has a 3-year warranty valid from the date of purchase. If this product has any faults, you, the buyer, have certain statutory rights. Your statutory rights are not restricted in any way by the warranty described below.

Warranty conditions

The validity period of the warranty starts from the date of purchase. Please keep your original receipt in a safe place. This document will be required as proof of purchase.

If any material or production fault occurs within three years of the date of purchase of the product, we will either repair or replace the product for you at our discretion. This warranty service is dependent on you presenting the defective appliance and the proof of purchase (receipt) and a short written description of the fault and its time of occurrence.

If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.

Warranty period and statutory claims for defects

The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.

The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or fragile parts such as switches, batteries, baking moulds or parts made of glass.

The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.

This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications / repairs which have not been carried out by one of our authorised Service centres.

Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

■ Please have the till receipt and the item number (e.g. IAN 12345) available as proof of purchase.

■ You will find the item number on the type plate, an engraving on the front page of the instructions (bottom left), or as a sticker on the rear or bottom of the appliance.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

■ You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

ULTIMATE SPEED UKLL 5 A1 - Warranty claim procedure - 1

You can download these instructions along with many other manuals, product videos and software on www.lidl-service.com.

Service

GB Service Great Britain

Tel.: 0800 404 7657

E-Mail: kompernass@lidl.co.uk

IE Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: kompernass@lidl.

IAN 313579

Importer

Please note that the following address is not the service address. Please use the service address provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

Indholdsfortegnelse

Introduktion 20

Informationer om denne

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

TYSKLAND

www.kompernass.com

Inhaltsverzeichnis

Einführung....38

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21 DE-44867 BOCHUM DEUTSCHLAND

www.kompernass.com

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

DE-44867 BOCHUM

GERMANY

www.kompernass.com

Last Information Update · Tilstand af information

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ULTIMATE SPEED

Model : UKLL 5 A1

Category : Car charger