Archer D2 - Router TP-LINK - Free user manual and instructions

Product Type	ADSL/VDSL WiFi Modem Router
Dimensions (L x D x H)	Approximately 200 x 150 x 30 mm
Weight	Approximately 300 g
Power Supply	Power adapter 12 V DC, 1 A
Wireless Standards	IEEE 802.11b/g/n (2.4 GHz)
Ports	1 DSL port, 4 RJ45 Ethernet ports (1 WAN + 3 LAN or configurable 4 LAN)
Main Functions	Internet connection via ADSL/VDSL, WiFi access point, WiFi router mode, connection sharing
Package Contents	Archer D2 Modem Router, phone cable, Ethernet cable, power adapter, quick installation guide
Care and Cleaning	Keep away from water, fire, humidity and high temperatures. Do not disassemble or repair yourself. Use a dry cloth for cleaning.
Safety	Do not use in areas where wireless communications are prohibited. Follow safety instructions. Limited 3-year warranty.
Spare Parts and Repairability	Repair only by an authorized professional. Contact TP-Link technical support for any assistance.
General Information	Brand: TP-Link, Model: Archer D2, Compatible ADSL/VDSL, CE certified.

Frequently Asked Questions - Archer D2 TP-LINK

What to do if the authentication page does not appear?

Check that the computer is obtaining an IP address automatically. Make sure you correctly enter http://tplinkmodem.net in the browser's address bar. Try another browser. Restart the modem router. If the problem persists, disable then re-enable the network adapter.

What to do if the LED status is incorrect?

Check the connections (phone cable, power). Reset the modem router to factory settings. Remove the DSL filter and connect the modem directly to the phone jack. Contact your Internet service provider (ISP) to check the DSL line status.

What to do if I cannot access the Internet?

Make sure the phone and Ethernet cables are properly connected. Log in to the web interface via http://tplinkmodem.net. Check the VCI/VPI settings, connection type, username and password with your ISP. Restore factory defaults and reconfigure the modem.

What to do if I forgot the administration interface password?

Reset the router to factory settings by holding the RESET button until the LEDs flash. Then create a new password or use admin as both username and password.

How to reset the modem router to factory settings?

With the router on, hold the RESET button until the LEDs change state (usually 5-10 seconds), then release. You can also do this from the web interface under System Administration.

How to configure the router in WiFi router mode (if you already have a modem)?

Connect your computer to the router, open a browser and go to http://tplinkmodem.net. Go to Advanced > Operation Mode and select WiFi Router Mode. The router will restart. Then connect the modem to the router's LAN4/WAN port with an Ethernet cable and complete the configuration in Basic > Internet.

What to do if I don't see the WiFi network?

Check that WiFi is enabled on the router (WiFi LEDs should be on). Check the label under the router for the default SSID (network name). Make sure your device is in range. Restart the router. If necessary, log in to the web interface to check WiFi settings.

How to change the WiFi password?

Log in to the router's administration interface via http://tplinkmodem.net. Go to WiFi or Wireless settings. Change the password (security key) and save. Remember to reconnect your devices with the new password.

How to use the Tether app to manage the router?

Download the Tether app from the App Store or Google Play. Connect your smartphone to the router's WiFi network. Open the app, create an account or log in, then follow the instructions to add your router. You can manage connected devices, parental controls and WiFi settings.

What safety instructions should be followed?

Keep the device away from water, fire, humidity and high temperatures. Do not attempt to disassemble or repair it yourself. Use only the provided power adapter. Do not use it in areas where wireless communications are prohibited. Read and follow all safety instructions before use.

USER MANUAL Archer D2 TP-LINK

TP-Link Technologies Co., Ltd.

South Building, floors 1-3, 4-5, and 26, floors 1-4, Central Science &

Technology Park, Sherman Ed, Naringen, Shenzhen, Chris

TP-Link US Limited Unit 2 & 3 Riverview (142-144), Cardiff Road, Reading, RC1 8FW

TP-Link Italia S.r.l. Via Cobetti 21, 20063 Cenovino e University/Mh

(1) Link hand, 171

TP-Link France SA-II. Baliment Equalist, 18-15 avenue B 765 40 W/line Wilcox-class France

IPunkÜlgi Teknologien Tic. Ltd. Şil Şerlali Mevki, Darbaros Cad. Soyleşi Sokak. Nr:15/2 Kat3/4

TP-Link IBER/A.S.L. Calc Quintanozides 17, S°F. 26050 Madrid, Spain

TP Link Netherlands B.V. Archimedeksson 28, 3038 M. Nes vanzen

TD Line (Novel AF) For revenue 14, 7p 13, 121.59 Nourle, Suncor

TP Line Holders Inc. (www.hkgroup.com) 151-26

TP-Lin, Helix Ltd, Maral-Tomber-Hou 77, March 15; 24, Greece

RWS. 72-Link Portugal, Unpessos, Lde. Avenda da Liberdade, n°245, 7°E, 1250-143 Lisboa, Portugal

TP-Link Technologies Co., Ltd.

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved.

For technical support, replacement services, the user guide and other information, please visit https://www.tp-link.com/support, or simply scan the QR code.

7106508605 REV13.0

tp-link

Quick Installation Guide

Wireless DSL Modem Router

CONTENTS

1 / Deutsch 6 / English 11 / Español 16 / Ελληνικά 21 / Français 26 / Italiano 31 / Português 36 / Suomi 41 / Nederlands 46 / Svenska 51 / Norsk 56 / Dansk

Hardware Installation

Connect the Hardware

If you don't need the phone service, just directly connect the modem router to the phone jack with the provided phone cable, then follow steps 3 and 4 to complete the hardware connection.

* Image may differ from actual product.

4 Wait for 2 minutes. The Power and DSL LEDs will be on and stable. If there is only one LED, it will flash slowly instead.

Note: If the LED status is different, please refer to FAQ > Q2.

Configure via Web Browser

1 Connecting your computer to the modem router via a wired or wireless connection

Wired

Connect your computer to the LAN (or 1/2/3/4) port using an Ethernet cable.

Wireless

Connect wirelessly by using the SSID (network name) and Wireless Password printed on the product label at the bottom of the modem router.

2 Configuring the modem router via a web browser

A Launch a web browser and type in

http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

B Create a password for future login attempts, or use admin for both username and password for some routers.

C Go to Quick Setup or Quick Start page and follow the step-by-step instructions to complete the initial configuration.

Now you can enjoy your internet.

English

Already Have a Modem?

If you already have a modem or your internet comes directly from an Ethernet wall outlet, you can switch to Wireless Router mode. Follow the steps below and set up.

1. Connect your computer to the router (LAN 1/2/3 port) via a wired or wireless connection. Note: The SSIDs (network names) and wireless password are printed on the product label. 2. Configure the modem router via a web browser.

A. Launch a web browser and type in http://tplinkmodem.net or 192.168.1.1.

Note: If the login page does not appear, please refer to FAQ > Q1.

B. Create a password for future login attempts, or use admin for both username and password for some routers.

C. Go to Advanced > Operation Mode page and switch to Wireless Router Mode. Wait until the restart finishes.

3. Connect the modem to the router's LAN4/WAN port via an Ethernet cable.

4. Go to Basic > Internet to finish the setup.

Now you can enjoy your internet. For more advanced settings, refer to the User Guide on TP-Link's official website at www.tp-link.com.

Tether App

The TP-Link Tether app provides a simple, intuitive way to access and manage your router. You can block unwelcome devices, set up Parental Controls, configure your wireless settings and more.

Scan the QR code to download the TP-Link Tether app from the Apple App Store or Google Play.

Note: Tether is not supported by some routers. Please check the app description before downloading.

FAQ (Frequently Asked Questions)

Q1. What can I do if the login page does not appear?

A1. If the computer is set to a static or fixed IP address, change the settings to obtain an IP address automatically from the modem router.

A2. Verify http://tplinkmodem.net is correctly entered in the web browser and press Enter.

A3. Use another web browser and try again.

A4. Reboot your modem router and try again.

A5. Disable and enable the active network adapter.

Q2. What can I do if the LED status is not correct?

A1. Check your cables and make sure they are all plugged in correctly, including the telephone lines and power adapter.

A2. Restore your modem router to its factory default settings.

A3. Remove the DSL splitter, directly connect the modem router to the phone jack and then reconfigure the modem router by following the instructions in this Quick Installation Guide.

A4. Contact your ISP to verify if the DSL line is in good status.

A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

Q3. What can I do if I cannot access the internet?

A1. Make sure the telephone and Ethernet cables are plugged in correctly. A2. Try to log in to the web management page of the modem router using the default address at http://tplinkmodem.net. If you can, try the following answers. If you cannot, change your computer to obtain an IP address automatically from the modem router. A3. Consult your ISP and make sure all the VPI/VCI (or VLAN ID), Connection Type, account username and password are correct. If they are not, replace them with the correct settings and try again. A4. Restore the modem router to its factory default settings and reconfigure the modem router by following the instructions in this Quick Installation Guide. A5. If you have tried all the suggestions above and the problem still exists, contact our Technical Support.

Q4. What can I do if I forget my password?

- Web management page password:

A. Refer to FAQ > Q5 to reset the router, and then create a password for future login attempts, or use admin for both username and password for some routers.

- Wireless network password:

A1. The default Wireless Password/PIN is printed on the product label of the modem router. A2. If the default wireless password has been changed, log in to the web management page of the router to retrieve or reset your wireless password.

Q5. How do I restore the modem router to its factory default settings?

A1. With the modem router powered on, press and hold down the RESET button of the modem router until there is an obvious change of LEDs, and then release the button. A2. Log in to the web management page of the modem router and go to the system management page to restore the modem router.

• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

TP-Link Three Years Limited Product Warranty

For TP-Link Branded Products Only.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE).

TO THE EXTENT ALLOWED BY LOCAL LAW, THIS WARRANTY AND THE REMEDIES SET FORTH ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS.

TP-Link warrants the TP-Link branded hardware product contained in the original packaging against defects in materials and workmanship when used normally in accordance with TP-Link's guidelines for a period of THREE YEARS from the date of original retail purchase by the end-user purchaser.

Spanish

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.

Greek