PFR 28 A1 - Pressure washer PARKSIDE - Free user manual and instructions

Product Type	High Pressure Cleaner
Brand	Parkside
Model	PFR 28 A1
Dimensions (L x W x H)	30 x 28 x 50 cm
Weight	6 kg
Power Supply	230 V ~ 50 Hz, 1400 W
Maximum Working Pressure	120 bar
Maximum Water Flow	420 L/h
Max. Water Temperature	40 °C
Protection Class	II
High Pressure Hose Length	5 m
Power Cord Length	5 m
Main Features	Adjustable nozzle (flat jet / rotating jet), auto-stop, detergent injector, transport wheels
Maintenance and Cleaning	Clean the water inlet filter regularly, descale the pump if necessary, rinse with clear water after using detergent
Safety	Child safety lock on trigger, auto-stop in closed position, overheat protection
Spare Parts and Repairability	Water filter, nozzles, seals, high pressure hose, handle, repair kits available
Repairability Index	7/10

Frequently Asked Questions - PFR 28 A1 PARKSIDE

How do I use detergent with this pressure washer?

Use the integrated detergent tank. Make sure the nozzle is in low pressure mode (flat jet) to draw in the product. Rinse thoroughly with clean water after use.

What is the maximum pressure of the Parkside PFR 28 A1?

The maximum working pressure is 120 bar. Do not exceed this value to avoid damaging the device or the surface being cleaned.

How do I bleed the air from the system before first use?

Connect the water inlet hose, open the tap, then squeeze the trigger without the motor until water flows without bubbles. Then turn the device on.

What should I do if the pressure is too low?

Check the water inlet filter (clean it), the garden hose (no kinks), and the nozzle (descale it). Make sure the water flow is sufficient.

Can I use hot water?

Yes, but the water temperature must not exceed 40 °C. Hotter water can damage the pump.

How do I store the device after use?

Unplug the cord, drain any remaining water, coil the hose, and store the device in a dry, frost-free place.

What type of oil should I use for the pump?

This model does not require an oil change as the pump is lifetime lubricated. If an oil level check is needed, use SAE 30 oil.

Can I clean my car engine with this pressure washer?

Yes, but use reduced pressure (wide jet nozzle) and avoid sensitive electronic components. Cover the alternator and connectors.

Why does the device shut off by itself?

Auto-stop is normal when the trigger is released. If shutoff occurs during use, check for overheating (let it cool down) or lack of water.

Where can I find spare parts like a hose or nozzle?

Contact Parkside customer service or visit a specialized retailer. Reference numbers are in the manual. You can also order online.

USER MANUAL PFR 28 A1 PARKSIDE

SURFACE CLEANER PFR 28 A1

GB IE NI

SURFACECLEANER

Translation of the original instructions

NL BE

REINIGER VOOR OPPERVLAKKEN

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

FR BE

GB / IE / NI Translation of the original instructions Page 4

General description......4

Extent of the delivery 4

Overview....4

Functional description 5

Technical data....5

Notes on Safety ....5

Symbols in the manual....5

General notes on Safety...... 5

Working with the equipment......6

Fitting 6

Start-up 7

Cleaning and Maintenance......7

Cleaning....7

Maintenance 7

Storage 7

Waste Disposal and Environmental Protection....8

Replacement parts / Accessories ...8

Guarantee 8

Repair Service....9

Service-Center 10

Importer 10

Translation of the original EC declaration of conformity .....35

Introduction

Congratulations on the purchase of your new device. With it, you have chosen a high quality product.

The operating instructions constitute part of this product. They contain important information on safety, use and disposal.

Before using the product, familiarise yourself with all of the operating and safety instructions. Use the product only as described and for the applications specified.

Keep this manual safely and in the event that the product is passed on, hand over all documents to the third party.

Intended use

This patio cleaner is intended for private use only:

- for high-pressure water cleaning of floors and walls;

- cleaning the object according to its manufacturer's information.

The patio cleaner is designed for use with pressure washer Parkside

PHD 100 C2, PHD 100 D2, PHD 100 E2, PHD 150, PHD 150 A1, PHD 150 B2, PHD 150 C2, PHD 150 D3, PHD 150 E4.

General Description

The diagram of the most important functional elements can be found on the foldout side.

Extent of the delivery

Unpack the pressure washer and verify the contents:

• Patio cleaner
• Connection pipe
• Pipe extension
• Adapter
• Instruction for use

Overview

1 Adapter
2 Retainer nut of adapter
3 Retainer nut
4 Pipe extension
5 Connection pipe
6 Pivoting connector
7 Body
8 Handle
9 Pressure regulator

Functional description

The patio cleaner is designed for splash-proof pressure cleaning of floors and walls. Rotating nozzles ensure that cleaning is highly efficient.

The adapter is suitable for connecting to other common high pressure cleaners made by other manufacturers.

Technical data

Patio cleaner ......PFR 28 A1

Suitable for devices with the following performance data:

Rated pressure (p) .....110 bar / 11 MPa Permissible pressure (p max) .....150 bar / 15 MPa Max. flow rate (Q max) .....450 l/h Max. Supply temperature (T max) .....60°C / 140°F

The patio cleaner is designed for pressure washers working at a nominal pressure (p max) of 90-150 bar.

Patio Cleaner PFR 28 A1 + Adapter:

Suitable for devices with the following performance data:

Rated pressure (p) ..... 110 bar / 11 MPa Permissible pressure (p max) ..... 150 bar / 15 MPa Max. flow rate (Q max).....450 l/h Max. Supply temperature (T max) ..... 40°C / 104°F

Technical and optical changes can be carried out in the course of further development without notice. All dimensions, references and information of this instruction manual are therefore without guarantee. Legal claims, which are made on the basis of the instruction manual, cannot thus be considered as valid.

Notes on Safety

This Section is concerned with the basic safety rules when working with the patio cleaner.

Symbols in the manual

Warning symbols (the danger can be explained at the place of the exclamation mark) with information on damage and injury prevention.

Help symbols with information on improving tool handling.

Symbols on the device

Caution: to avoid accidents and injuries.

Never reach under the patio clean-er when it is on.

Read the manual.

General notes on safety

- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been

GBIENI

given supervision or instruction concerning use of the appliance by a person responsible for their safety.

- People who are unfamiliar with the operating instructions are not permitted to use the equipment. The operation of the equipment is not authorised for people under the age of 16.

Working with the equipment

CAUTION. pressure washers can be dangerous if they are not operated correctly! The jet must never be directed at people, animals, electric equipment connected to the power supply or against the actual pressure washer.

- Do not direct the jet at yourself or others in order to clean clothes and shoes.

- Do not operate the pressure washer when other people are in the immediate vicinity, other than they are also wearing protective clothes.

- Do not start the high-pressure wash until the patio cleaner rests on the surface you are cleaning.

• Take appropriate measures to keep children away from the equipment whilst it is running.

- Dispose of the packaging material correctly.

- Do not use the equipment in the vicinity of flammable liquids or gases. Non-observance will result in a risk of fire or explosion.

- Store the equipment in a dry place and out of reach of children.

• Children should be supervised to ensure that they do not play with the appliance.

- Follow the security tips of your high-pressure washer.

- The operator or user is responsible for any accidents or personal injury and/or material damage to third parties or their property.

Caution! To avoid damage to the equipment and any possible person injury resulting from this:

- Do not use for cleaning windows.

- Do not work with damaged or incomplete equipment, or with equipment that has been converted without the approval of the manufacturer.

- Protect the patio cleaner from frost

- Use only original accessories and do not carry out conversion work on the equipment.

Fitting

Connection without adapter

A

1. Screw the connection pipe (5) into the pivoting connector (6).

2. To extend your reach, snap on and turn the bayonet mount of the pipe extension (4) to the connection pipe (5).

3. To connect to the PARKSIDE-pressure washer, snap the bayonet mount into the PARKSIDE-pressure washer's jet gun.

4. When you use the extension element (4) screw the retainer nut (3) against the spray gun.

Connection with adapter

1. Attach the adapter (1) to the extension element (4) or the connecting element (5) and turn it through 90° until it locks into place (bayonet locking device). Screw the cap nut (3) of the extension element (4) against the adapter (1).

2. Connect the spray gun (bayonet locking device) and screw the cap nut (2) of the adapter (1) against the spray gun.

To release

1. Release the retainer nut of adapter (2) on the adapter (1). B
2. Loosen retainer nut (3) on the extension element (4).
3. Release the catches by pushing and turning through 90° in the opposite direction (Bayonet catch).

Start-up

Working instructions

Take heed of the backstroke generated by the jet of water. Stand firmly and hold the jet gun tightly. You may otherwise injure yourself or others.

• Do not release water from the pressure washer until the patio cleaner rests on the surface you are cleaning.

• Always hold the patio cleaner by the handle (8) when washing down walls.

• Avoid the patio cleaner going over free corners.

• The patio cleaner is not designed for scouring out or scrubbing.

Pressure control

1. You can adjust the pressure of the escaping water jet by turning the pressure regulator (9). Accordingly, the rotation speed of the nozzles changed

2. Increase the pressure (+) by turning the pressure regulator (9) in a clockwise direction. Reduce the pressure (−) by turning the screw counterclockwise connections.

Cleaning and Maintenance

Always remove the mains plug of the high pressure cleaner before working on the device. There is a risk of electric shock or injury from moving parts.

Cleaning

Always keep the washer clean. Do not use any detergents or solvents.

- Only clean the pressure washer with a soft brush or a slightly moist cloth.

Maintenance

The device is maintenance-free.

Storage

- Store the device in a frost-free room.

Waste Disposal and Environmental Protection

Be environmentally friendly. Return the tool, accessories and packaging to a recycling centre when you have finished with them.

Electric appliances should not be disposed of in the domestic garbage.

Hand the tool in at a recycling centre. The plastics and metal parts can be separated and recycled. Ask your Service Center about this.

Defective units returned to us will be disposed of for free.

Replacement parts / Accessories

Spare parts and accessories can be obtained at www.grizzly-service.eu

If you do not have internet access, please contact the Service Centre via telephone (see "Service-Center" Page 10). Please have the order number mentioned below ready.

A 1 Adapter.... 30300505

Guarantee

Dear Customer,

This equipment is provided with a 3-year guarantee from the date of purchase. In case of defects, you have statutory rights against the seller of the product. These statutory rights are not restricted by our guarantee presented below.

Terms of Guarantee

The term of the guarantee begins on the date of purchase. Please retain the original receipt. This document is required as proof of purchase.

If a material or manufacturing defect occurs within three years of the date of purchase of this product, we will repair or replace – at our choice – the product for you free of charge. This guarantee requires the defective equipment and proof of purchase to be presented within the three-year period with a brief written description of what constitutes the defect and when it occurred.

If the defect is covered by our guarantee, you will receive either the repaired product or a new product. No new guarantee period begins on repair or replacement of the product.

Guarantee Period and Statutory Claims for Defects

The guarantee period is not extended by the guarantee service. This also applies for replaced or repaired parts. Any damages and defects already present at the time of purchase must be reported immediately after unpacking. Repairs arising after expiry of the guarantee period are chargeable.

Guarantee Cover

The equipment has been carefully produced in accordance with strict quality guidelines and conscientiously checked prior to delivery.

The guarantee applies for all material and manufacturing defects. This guarantee does not extend to cover product parts that are subject to normal wear and may therefore be considered as wearing parts (e.g. brush or nozzles) or to cover damage

to breakable parts (e.g. switches, batteries, or parts made of glass).

This guarantee shall be invalid if the product has been damaged, used incorrectly or not maintained. Precise adherence to all of the instructions specified in the operating manual is required for proper use of the product. Intended uses and actions against which the operating manual advises or warns must be categorically avoided.

The product is designed only for private and not commercial use. The guarantee will be invalidated in case of misuse or improper handling, use of force, or interventions not undertaken by our authorised service branch.

Processing in Case of Guarantee

To ensure quick handling of you issue, please follow the following directions:

• Please have the receipt and item number (IAN 280210) ready as proof of purchase for all enquiries.
• Please find the item number on the rating plate.
• Should functional errors or other defects occur, please initially contact the service department specified below by telephone or by e-mail. You will then receive further information on the processing of your complaint.

- After consultation with our customer service, a product recorded as defective can be sent postage paid to the service address communicated to you, with the proof of purchase (receipt) and specification of what constitutes the defect and when it occurred. In order to avoid acceptance problems and additional costs, please be sure to use only the address communicated to you. Ensure that the consignment is not sent carriage forward or by bulky goods, express or other special freight. Please send the equipment inc. all accessories supplied at the time of purchase and ensure adequate, safe transport packaging.

Repair Service

For a charge, repairs not covered by the guarantee can be carried out by our service branch, which will be happy to issue a cost estimate for you.

We can handle only equipment that has been sent with adequate packaging and postage.

Attention: Please send your equipment to our service branch in clean condition and with an indication of the defect.

Equipment sent carriage forward or by bulky goods, express or other special freight will not be accepted.

We will dispose of your defective devices free of charge when you send them to us.

Service-Center

Service Great Britain

Tel.: [phone]

(£ 0.10/Min.)

E-Mail: [e-mail]

IAN 280210

Service Ireland

Service Northern Ireland

Tel.: [phone]

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (off peak))

E-Mail: [e-mail]

IAN 280210

Importer

Please note that the following address is not a service address. Please initially contact the service centre specified above.

Service Réparations ......17

Service-Center....18

Importateur 18

conformité CE originale ......35

Introduction

Service-Center......25

Importeur ......25

Translation of the original EC declaration of conformity

We hereby confirm that the

Patio Cleaner

Design Series PFR 28 A1

Serial Number 201609000001 - 201609117456

conforms with the following applicable relevant version of the EU guidelines:

2006/42/EC

This declaration of conformity is issued under the sole responsibility of the manufacturer:

Simple line drawing of a curved line with a small mark inside, no text or symbols present

Volker Lappas

Documentation Representative