SG-FL652SPW - Loudspeaker Fusion - Free user manual and instructions
Find the device manual for free SG-FL652SPW Fusion in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Marine Coaxial Speaker |
| Brand | Fusion |
| Model | SG-FL652SPW |
| Speaker Size | 6.5 inches (165 mm) |
| Speaker Type | 2-Way Coaxial |
| Woofer Cone Material | Polypropylene with Rubber Surround |
| Tweeter | 1-inch (25 mm) PEI Dome |
| Impedance | 4 Ohms |
| Power Handling (RMS) | 50 Watts |
| Power Handling (Peak) | 150 Watts |
| Frequency Response | 60 Hz - 20 kHz |
| Sensitivity | 90 dB @ 1W/1m |
| Water Resistance | IPX5 (Water Jet Resistant) |
| UV Resistance | Yes (UV-stabilized materials) |
| Mounting Depth | 2.5 inches (63 mm) |
| Cutout Diameter | 5.5 inches (140 mm) |
| Dimensions (Overall) | 7.0 x 7.0 x 3.0 inches (178 x 178 x 76 mm) |
| Weight | 1.5 lbs (0.68 kg) per speaker |
| Color | White (SPW) |
| Connector Type | Spring-Loaded Terminals |
| Recommended Amplifier | 2-channel Marine Amplifier (50-100W RMS per channel) |
| Protection Features | UV resistant, corrosion resistant hardware |
| Cleaning Instructions | Wipe with a damp cloth; do not use harsh chemicals |
| Spare Parts Availability | Grilles, mounting screws, and terminal covers available from Fusion |
Frequently Asked Questions - SG-FL652SPW Fusion
What is the mounting depth of the Fusion SG-FL652SPW speaker?
The mounting depth is approximately 2.5 inches (63 mm). Ensure your installation location has sufficient clearance.
Is this speaker compatible with a 3-ohm amplifier?
The speaker has a 4-ohm impedance. It can be used with amplifiers rated for 4 ohms. Using a 3-ohm stable amplifier is safe, but power output may vary.
Can the SG-FL652SPW be used in a boat?
Yes, it is a marine speaker with an IPX5 water resistance rating, making it suitable for damp environments like boats. Avoid prolonged submersion.
What is the maximum power handling of this speaker?
It handles up to 150 Watts peak and 50 Watts RMS. Pair with an amplifier delivering clean power within this range for best performance.
Does this speaker come with a grille?
Yes, it includes a weather-resistant grille designed to protect the speaker while allowing sound to pass.
How do I clean the Fusion SG-FL652SPW?
Clean the speaker and grille with a damp, soft cloth. Do not use abrasive cleaners or solvents that may damage the materials.
What is the cutout diameter required for installation?
You need a 5.5-inch (140 mm) cutout. Use the included template for precise marking.
Can I use this speaker with a factory car stereo?
Yes, if the factory stereo outputs 4 ohms and has enough power (typically 15-25W RMS). For optimal sound, consider adding an amplifier.
Does the SG-FL652SPW require a separate crossover?
No, it has a built-in crossover that separates frequencies between the woofer and tweeter.
Is there a warranty for this Fusion speaker?
Fusion typically offers a limited warranty against defects. Check the included warranty card or contact Fusion support for details.
User questions about SG-FL652SPW Fusion
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual SG-FL652SPW - Fusion and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SG-FL652SPW by Fusion.
USER MANUAL SG-FL652SPW Fusion
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Fusion
Model : SG-FL652SPW
Category : Loudspeaker