BDV030 - Battery charger BLACK & DECKER - Free user manual and instructions
Find the device manual for free BDV030 BLACK & DECKER in PDF.
| Brand | Black & Decker |
| Model | BDV030 |
| Product type | Battery charger / Portable jump starter |
| Rated voltage | 12 V DC |
| Internal battery | Maintenance-free lead-acid battery, capacity 3 Ah |
| Output current (boost) | 7 A |
| Weight of main unit | 2 kg |
| Weight of mains charger | 0.2 kg |
| Charger input voltage | 230 V AC |
| Full charge time | Approximately 15 hours |
| Main functions | Emergency start (boost), 12 V power source (max 5 A), work area light, internal battery recharging |
| Compatible battery types | Vehicle 12 V lead-acid batteries |
| Indicators | Power indicator (red), battery status indicator (green/red), boost indicator (green) |
| Included accessories | Mains adapter, 12 V vehicle adapter, storage case |
| Double electrical insulation | Yes |
| Thermal protection | Automatic shutdown in case of overheating |
| Charging temperature range | 10°C to 40°C |
| Vehicle adapter fuse | 8 A |
| Maintenance | Clean with a damp cloth, do not immerse |
| Safety | Do not open the case, use in a ventilated area, avoid water |
| Repairability | No user-serviceable parts; refer to an authorized repairer |
| Warranty | 24 months |
| Intended use | Household, for vehicle 12 V lead-acid batteries |
Frequently Asked Questions - BDV030 BLACK & DECKER
User questions about BDV030 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Battery charger in PDF format for free! Find your manual BDV030 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDV030 by BLACK & DECKER.
USER MANUAL BDV030 BLACK & DECKER
Your Black & Decker battery booster is designed to provide additional power to lead-acid batteries when starting car engines and to provide a portable 12V power source. This product is intended for household, consumer use only.
Safety instructions
Warning! When using battery-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage.
◆ Read all of this manual carefully before using the appliance.
The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.
◆ Retain this manual for future reference.
Using your appliance
Always take care when using the appliance.
- This appliance is not intended for use by young or infirm persons without supervision.
◆ The appliance is not to be used as a toy.
◆ Use in a dry location only. Do not allow the unit to become wet.
◆ Do not immerse the appliance in water. - Do not open body casing. There are no user-serviceable parts inside.
Do not operate the appliance in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
◆ To reduce the risk of damage to plugs and cords never pull the cable to remove the plug from a socket outlet.
After use
When not in use, the appliance should be stored in a dry, well ventilated place out of the reach of children.
◆ Children should not have access to stored appliances.
When the appliance is stored or transported in a vehicle it should be placed in the boot or restrained to prevent movement following sudden changes in speed or direction.
◆ The appliance should be protected from direct sunlight, heat and moisture.
Inspection and repairs
Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.
- Do not use the appliance if any part is damaged or defective.
◆ Have any damaged or defective parts repaired or replaced by an authorised repair agent.
- Never attempt to remove or replace any parts other than those specified in this manual.
Specific safety instructions for battery boosters
The following symbols are marked on your appliance:
On/off button (3).
Vehicle boost button (4).
Recharge button (5).
Area light button (6).
- Vehicles may have electrical and electronic systems (e.g. engine management system, mobile phone) that may be damaged if subjected to high starting voltages and voltage peaks. Before connecting the appliance to the vehicle read the vehicle's owner's manual to confirm that external-starting assistance is allowed.
◆ Follow these instructions and those published by the battery manufacturer, vehicle manufacturer and manufacturer of any equipment you intend to use with this unit. Review the warning labels on these products and on the vehicle. - This appliance is not designed to be used as a replacement for a vehicular battery. Do not attempt to operate a vehicle that does not have a battery installed.
- The appliance must only be connected to a 12V lead-acid battery. Do not use the appliance for charging dry-cell batteries that are commonly used with home appliances. These batteries may burst and cause injury to persons and damage property.
This appliance contains a sealed lead-acid battery. It is recommended that the appliance is positioned upright during storage, use, and recharging. - Explosive gas may be vented from the lead acid batteries when charging and under extreme conditions battery leakage may occur. Ensure the area is well ventilated when conducting battery boosting and charging procedures.
Do not charge the appliance using the 12V connector when the vehicle is occupied. Ensure the area is well ventilated.
To reduce the risk of electric shock, disconnect the appliance from any power source before attempting maintenance or cleaning. Turning off controls without disconnecting the appliance will not reduce this risk.
ENGLISH
- The 12 Vdc outlet is strictly for use as an accessory outlet, the maximum output is 5A. Never insert a vehicle cigarette lighter into the unit's 12 Vdc accessory outlet.
Make sure the appliance is disconnected from all charging power sources before beginning the battery boost procedure. - Never attempt to use the ac charger and dc charging connection simultaneously.
◆ The appliance will not start a vehicle with a flat battery. - The appliance will not function correctly if you have other electrical faults on the vehicle.
This appliance is to be used only on vehicles with a DC negative earth system.
Additional safety instructions for batteries and chargers
Batteries
◆ Never attempt to open for any reason.
◆ Do not expose the battery to water.
- Do not store in locations where the temperature may exceed 40 °C.
◆ Charge only at ambient temperatures between 10 °C and 40 °C.
◆ Charge only using the chargers provided with the appliance.
When disposing of batteries, follow the instructions given in the section "Protecting the environment".
Under extreme conditions, battery leakage may occur. When you notice liquid on the batteries, carefully wipe the liquid off using a cloth. Avoid skin contact.
◆ In case of skin or eye contact, follow the instructions below.
Warning! The battery fluid is a diluted sulphuric acid and may cause personal injury or damage to property. In case of skin contact, immediately rinse with water. If redness, pain or irritation occurs seek medical attention. In case of eye contact, rinse immediately with clean water and seek immediate medical attention.
Chargers
Your charger has been designed for a specific voltage. Always check that the mains voltage corresponds to the voltage on the rating plate.
Warning! Never attempt to replace the charger unit with a regular mains plug.
Use your Black & Decker charger only to charge the battery in the tool with which it was supplied. Other batteries could burst, causing personal injury and damage.
◆ Never attempt to charge non-rechargeable batteries.
◆ Have defective cords replaced immediately.
◆ Do not expose the charger to water.
- Do not open the charger.
◆ Do not probe the charger.
The battery must be placed in a well ventilated area when charging.
The following symbols are found on your charger:
Your charging base is double insulated; therefore no earth wire is required.
Fail-safe isolating transformer. The mains supply is electrically separated from the transformer output.
The charger automatically shuts off if the ambient temperature becomes too high. As a consequence the charger will be inoperable. The charging base must be disconnected from the mains supply and taken to an authorised service centre for repair.
The charging base is intended for indoor use only.
Electrical safety
This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate.
If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
Features
This appliance includes some or all of the following features:
- Storage compartment
- 12 Vdc accessory outlet
- On/off button
- Vehicle boost button
- Recharge button
- Area light button
- 12 Vdc charging socket
- Area light
- Mains charging adaptor
- 12 Vdc vehicle adaptor
USE
Charging the unit (fig. A)
This unit is shipped in a partially charged state. Charge the unit before first use using the mains charging adaptor (9) for 15 hours or until the green battery status LED (13) lights.
◆ Charge after each use until the green battery status LED (13) lights.
To check the battery charge status at any time, turn the unit on by pressing the on/off button (3). The unit will beep once and the red power LED (11) and the battery status LED (13) will light.
The battery status LED (13) displays the level of charge:
◆ If the battery status LED (13) lights red charge the unit.
If the battery status LED (13) lights green the unit is fully charged.
Charging the unit with the mains charger (fig. A)
Make sure that the LED area light is turned off while the unit is being charged.
- Turn the unit on by pressing the on/off button (3). The unit will beep once and the red power LED (11) and the battery status LED (13) will light.
◆ Connect the mains charging adaptor (9) into the 12 Vdc charging socket (7) on the top of the unit.
◆ Insert the mains charging adaptor (9) into a mains power socket. - Press the recharge unit button (5). The unit will beep once and the green battery status LED (13) will flash, indicating that the unit is charging.
Warning! The unit will beep continuously and the battery status LED (13) will flash red if no charging lead is connected.
◆ Charge until the green battery status LED (13) lights continuously.
When charging is complete, disconnect the mains charging adaptor (9) and store in a safe place.
Charging the unit with the 12 Vdc vehicle adaptor (fig. A & B)
Note: The unit cannot be recharged while the 12 Vdc accessory outlet (2) is in use or while the unit is being used to boost/start a vehicle.
- Turn the unit on by pressing the on/off button (3). The unit will beep once and the red power LED (11) and the battery status LED (13) will light.
- Remove the 12 Vdc vehicle adaptor (10) from the storage compartment (1) and plug it into the vehicle's 12 Vdc accessory outlet.
- Press the recharge unit button (5). The unit will beep once and the green battery status LED (13) will flash, indicating that the unit is charging.
◆ Charge until the green battery status LED (13) lights continuously.
When charging is complete, disconnect the 12 Vdc vehicle adaptor (10) and return it to the storage compartment (1).
Standby mode (fig. A)
When the unit is in standby mode (not connected to a vehicle and not charging, but with the power on), the battery status LED (13) will light green to indicate it is ready for use. If the battery status LED (13) lights red, the unit needs to be charged.
Using the battery booster (fig. A)
Warning! Make sure the unit is disconnected from all charging power sources before beginning the battery boosting procedure.
Warning! This power system is to be used only on vehicles with dc battery systems.
Warning! Vehicles that have on-board computerized systems may be damaged if the vehicle battery is boosted. Before battery boosting this type of vehicle, read the vehicle owner's manual to confirm that external-starting assistance is advised.
Warning! Excessive engine cranking can damage the vehicle's starter motor. If the engine fails to start after the recommended number of attempts (refer to the vehicle's owner manual), discontinue the battery boost procedure and look for other problems that need to be corrected.
Warning! Ensure you turn off items such as lights before you start this procedure.
- Turn the unit on by pressing the on/off button (3). The unit will beep once and the red power LED (11) and the battery status LED (13) will light to indicate that it is functioning.
Remove the 12 Vdc vehicle charging adaptor (10) from the storage compartment (1) and plug it into the vehicle's 12 Vdc accessory outlet.
◆ Press the vehicle boost button (4). The unit will beep once and the green vehicle boost LED (4) will flash, indicating that the vehicle battery is being charged/boosted.
Note: When connecting to a vehicle's 12 Vdc accessory outlet, it may be necessary to turn on the vehicles ignition to power the accessory outlet.
When the green vehicle boost LED (4) lights continuously and the unit beeps, (after approximately 10 minutes), the vehicle battery has been boosted. Turn the vehicle ignition and crank the engine in 5-6 second bursts until engine starts.
Note: The battery booster will not function while the unit is recharging or while the 12 Vdc accessory outlet (2) is in use.
- After use, turn the unit off by pressing the on/off button (3) and recharge the unit as soon as possible so that it is ready for the next emergency.
Warning! The end of the vehicle charging adaptor will be hot to touch during and after boosting the vehicles battery
Using the 12 Vdc portable power supply (fig. A)
This portable power supply can be used with all 12 Vdc accessories equipped with a male accessory outlet plug rated up to 5 amps.
Warning! Do not attempt to use the battery booster or recharge the unit while the 12 Vdc accessory outlet (2) is in use.
◆ Lift the cover of the 12 Vdc accessory outlet (2).
ENGLISH
◆ Insert the 12 Vdc plug from the appliance into the 12 Vdc accessory outlet (2) on the top of the unit.
Warning! Do not exceed a 5A load.
◆ Switch on the appliance and operate as usual.
◆ Using the led area light (fig. A)
◆ Press the area light on/off button (6) on the top panel of the unit to turn the LED area light (8) on.
◆ Press the area light on/off button (6) on the top panel of the unit to turn the LED area light (8) off.
Make sure that the LED area light is turned off while the unit is being charged or stored.
MAINTENANCE
Your Black & Decker tool has been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance or cleaning on the appliance, unplug the appliance.
◆ From time to time wipe the appliance with a damp cloth. Do not use any abrasive or solvent-based cleaner. Do not immerse the appliance in water.
Replacing the fuse in the vehicle dc vehicle adapter
◆ Remove the gold cap by turning it counter clockwise.
◆ Remove the rubber washer, centre pin and the spring.
◆ Remove the fuse.
◆ Fit a new fuse of the same type and size (8 A).
◆ Install the centre pin, spring and rubber washer.
◆ Install the gold cap by turning clockwise onto the plug.
Protecting the environment
Should you find one day that your appliance needs replacement, or if it is of no further use to you, think of the protection of the environment. Black & Decker repair agents will accept old Black & Decker tools and ensure that they are disposed of in an environmentally safe way.
Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials.
Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
Black & Decker provides a facility for the collection and recycling of Black & Decker products once they have reached the end of their working life. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www.2helpU.com.
Black & Decker batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment:
Do not dispose of the battery in fire, as this may result in an explosion.
Lead Acid (Pb) batteries are recyclable. They must not be disposed of with Household waste. If you do not have access to a product recycling scheme the battery must be removed as described below and disposed of in accordance with local regulations.
◆ Do not short-circuit the battery terminals.
◆ Be aware that the battery is heavy.
◆ If possible, operate the appliance to run the battery down completely.
Please refer to the exploded diagram at the back of this manual to aid you in the removal of the batteries.
Place the battery in a suitable packaging to ensure that the terminals cannot be short-circuited.
Take the battery to your service agent or a local recycling station. Collected batteries will be recycled or disposed of properly.
Technical data
| BDV030 | ||
| Voltage Vdc 12 | ||
| Battery | Type | 3 of 3 Ah sealed lead type |
| Output A 7 | ||
| Weight kg 2 | ||
| Battery Charger | ||
| Input Vac 230 | ||
| Approx. charging time h 15 | ||
| Weight kg 0.2 | ||
EC declaration of conformity
BDV030
Black & Decker declares that these products conform to:
95/54/EC, 73/23/EEC, 89/336/EEC
Director of Consumer Engineering
Spennymoor, County Durham
DL16 6JG,
United Kingdom
31-08-2006
Guarantee
Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guarantees to replace defective parts, repair products subjected to fair wear and tear or replace such products to make sure of the minimum inconvenience to the customer unless:
◆ The product has been used for trade, professional or hire purposes.
◆ The product has been subjected to misuse or neglect.
- The product has sustained damage through foreign objects, substances or accidents.
◆ Repairs have been attempted by persons other than authorised repair agents or Black & Decker service staff.
To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at:
www.2helpU.com
Please visit our website www.blackanddecker.co.uk to register your new Black & Decker product and to be kept up to date on new products and special offers. Further information on the Black & Decker brand and our range of products is available at www.blackanddecker.co.uk.
DEUTSCH
Director of Consumer Engineering
Spennymoor, County Durham
DL16 6JG,
95/54/EC, 73/23/CEE, 89/336/CEE
Spennymoor, County Durham
DL16 6JG,
Royaume-Uni
31-08-2006
Garantie
95/54/CE, 73/23/CEE, 89/336/CEE
Spennymoor, County Durham
DL16 6JG,
Regno Unito
31-08-2006
Garanzia
95/54/EC, 73/23/EEC, 89/336/EEC
Director of Consumer Engineering
Spennymoor, County Durham
DL16 6JG,
Verenigd Koninkrijk
31-08-2006
Garantie
95/54/EC, 73/23/EEC, 89/336/EEC
Spennymoor, County Durham
DL16 6JG,
Reino Unido
31-08-2006
Garantía
95/54/EC, 73/23/EEC, 89/336/EEC
Spennymoor, County Durham
DL16 6JG,
Reino Unido
31-08-2006
Garantia
Director of Consumer Engineering
Spennymoor, County Durham
DL16 6JG,
Storbritannien
31-08-2006
Garanti
95/54/EF, 73/23/E0FC, 89/336/E0F
Spennymoor, County Durham
DL16 6JG,
Storbritannia
31-08-2006
Garanti
Black & Decker er trygg på kvaliteten til sine produkter og tilbyr en enestående garanti. Denne garantierklæringen komme i tillegg til dine lovbestemte rettigheter, og er ikke i konflikt med disse. Garantien er gyldig i EU- og EFTA-medlemsstatene.
Director of Consumer Engineering
Spennymoor, County Durham
DL16 6JG,
Storbritannien
31-08-2006
Garanti
Director of Consumer Engineering
Spennymoor, County Durham
DL16 6JG,
Iso-Britannia
31-08-2006
Takuu
informate went to ontvangen. ◆ Ar.u.D. on vaké dankunisen in
◆ Data protection act: Tick the box if you prefer
koneesi? • Eival to evaporatio auto in npurtm oas ayopod?
English Please complete this section immediately after the purchase of your
tool and send it to Black & Decker in your country. If you live in Australia or New Zealand, please register by using the alternative
guarantee card supplied.
Black & Decker in uw land.
- Safety instructions
- Using your appliance
- After use
- Inspection and repairs
- Specific safety instructions for battery boosters
- ENGLISH
- Additional safety instructions for batteries and chargers
- Batteries
- Chargers
- The following symbols are found on your charger:
- Electrical safety
- Features
- USE
- Charging the unit (fig. A)
- Charging the unit with the mains charger (fig. A)
- Charging the unit with the 12 Vdc vehicle adaptor (fig. A & B)
- Standby mode (fig. A)
- Using the battery booster (fig. A)
- Using the 12 Vdc portable power supply (fig. A)
- MAINTENANCE
- Replacing the fuse in the vehicle dc vehicle adapter
- Protecting the environment
- EC declaration of conformity
- Guarantee
- www.2helpU.com
- DEUTSCH
- Garantie
- Garanzia
- Garantía
- Garantia
- Garanti
- Takuu
Brand : BLACK & DECKER
Model : BDV030
Category : Battery charger