KR1001 - Rotary hammer BLACK & DECKER - Free user manual and instructions
Find the device manual for free KR1001 BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Hammer drill |
| Brand | Black & Decker |
| Model | KR1001 |
| Main use | Hammer drilling in concrete, brick, stone |
| Rated power | 600 W |
| Supply voltage | 230 V ~ 50 Hz |
| No-load speed | 0 - 2800 rpm |
| Impact rate | 0 - 4800 bpm |
| Drilling capacity (concrete) | 16 mm |
| Drilling capacity (wood) | 25 mm |
| Drilling capacity (metal) | 10 mm |
| Chuck type | Keyed chuck (self-tightening chuck on some models) |
| Weight | 2.4 kg |
| Dimensions (L x W x H) | 400 x 100 x 200 mm |
| Functions | Drilling, hammer drilling, hammer only |
| Variable speed | Yes, adjustment wheel |
| Switch lock | Yes, for continuous operation |
| Double insulation | Yes, without earth wire |
| Maintenance and cleaning | Clean with a dry cloth; replace worn brushes |
| Spare parts available | Brushes, chuck, switch, bearings |
| Repairability | Repairability index: 7.4/10 (estimate) |
Frequently Asked Questions - KR1001 BLACK & DECKER
How to change the chuck on the KR1001?
Unplug the tool. Use a hex key to unscrew the screw inside the chuck. Then turn the chuck counterclockwise to remove it. Install the new chuck and retighten the screw.
What is the maximum drilling depth in concrete?
With a suitable drill bit, you can drill up to 16 mm diameter in concrete. For deeper holes, use longer drill bits.
Can I use the KR1001 for screwdriving?
No, this model is a hammer drill designed for hammer drilling. It is not suitable for screwdriving as it does not have a torque limiter.
How to adjust the drilling speed?
Use the adjustment wheel located on the trigger. Turn it to increase or decrease the speed. The speed varies from 0 to 2800 rpm.
Is the KR1001 supplied with a case?
Depending on the version, it may be supplied in a cardboard box or a plastic case. Check the packaging at the time of purchase.
How to replace the brushes?
Unplug the tool. Unscrew the caps of the brush holders on each side of the motor. Remove the old brushes and insert the new ones. Screw the caps back on. Make sure the brushes slide freely.
What is the warranty on the KR1001?
Black & Decker generally offers a 2-year warranty on its tools. Register your product online to activate the warranty.
Can I use SDS-plus drill bits with this model?
No, the KR1001 is equipped with a standard keyed chuck. It only accepts cylindrical shank bits. For SDS bits, you would need an adapter, but this is not recommended.
How to clean the tool after use?
Use a dry cloth to remove dust and debris. Do not use water or solvents. Regularly clean the ventilation slots with a soft brush.
What to do if the tool does not start?
First check that the power is plugged in and the cable is not damaged. Test the socket with another device. If the problem persists, the brushes may be worn or the switch defective. Consult an authorized repairer.
User questions about KR1001 BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Rotary hammer in PDF format for free! Find your manual KR1001 - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KR1001 by BLACK & DECKER.