Vigor 2927L - Router Draytek - Free user manual and instructions
Find the device manual for free Vigor 2927L Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Draytek |
| Model | Vigor 2927L |
| Dimensions (W x D x H) | 240 x 165 x 44 mm |
| Weight | 1.5 kg |
| Power Supply | DC 12V, 2A |
| WAN Ports | 2 x Gigabit Ethernet |
| LAN Ports | 4 x Gigabit Ethernet |
| USB Ports | 1 x USB 2.0 |
| VPN Support | IPsec, PPTP, L2TP, OpenVPN |
| Load Balance | Dual WAN load balancing and failover |
| Firewall | SPI firewall, DoS/DDoS prevention |
| QoS | Traffic shaping and bandwidth management |
| Wireless | Built-in 802.11ac (optional) or external AP support |
| Management | Web interface, CLI, TR-069 |
| Maintenance | Keep in dry, dust-free environment. Clean with soft cloth. |
| Safety | Do not expose to water or high humidity. Disconnect power before cleaning. |
| Spare Parts & Repairability | Power adapter available. Other components not user-serviceable. |
Frequently Asked Questions - Vigor 2927L Draytek
How do I set up the Vigor 2927L for the first time?
Connect the router to your modem via WAN1, then power on. Access the web interface at 192.168.1.1 with default credentials (admin/admin). Follow the Quick Start Wizard to configure internet connection.
How can I configure VPN on the Vigor 2927L?
Go to VPN and Remote Access > LAN to LAN or Dial-in/out. Select protocol (IPsec/L2TP/PPTP). Set up pre-shared keys and user credentials. Apply settings. Refer to manual for advanced options.
What is the default IP address and login?
Default IP: 192.168.1.1. Username: admin, Password: admin. It is recommended to change the password immediately.
How do I reset the router to factory defaults?
Press and hold the Reset button on the rear panel for at least 10 seconds until the lights blink. The router will reboot with factory settings.
Can I use dual WAN for load balancing?
Yes. Go to WAN > General Setup and enable Load Balance. Set weights for each WAN. The router will distribute traffic based on the configured ratio.
How to update firmware on the Vigor 2927L?
Download the latest firmware from DrayTek website. Go to System Maintenance > Firmware Upgrade. Upload the file and confirm. Do not power off during upgrade.
What security features are supported?
The router includes SPI firewall, DoS/DDoS protection, content filtering, VPN encryption, and access control lists. Configure under Security menu.
How do I set up QoS?
Go to Bandwidth Management > QoS Setup. Define traffic classes and assign priority. Enable QoS on WAN interfaces. Use bandwidth limits to control per-IP traffic.
What is the difference between Vigor 2927L and standard 2927?
The 'L' variant typically includes LTE fallback or additional wireless features. Check the product label for exact specifications.
How do I troubleshoot internet connection issues?
Check WAN status in Status > WAN Status. Ensure cables are secure. Verify ISP settings. Use Diagnostics tools (ping, traceroute) in System Maintenance.
User questions about Vigor 2927L Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Vigor 2927L - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vigor 2927L by Draytek.