VigorFly200 - Router Draytek - Free user manual and instructions
Find the device manual for free VigorFly200 Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router |
| Brand | Draytek |
| Model | VigorFly200 |
| Dimensions (W x D x H) | 145 mm x 110 mm x 30 mm |
| Weight | 220 g |
| Power Supply | DC 12V, 1A |
| Ethernet Ports | 5 x 10/100 Mbps (1 WAN, 4 LAN) |
| Wireless Standard | IEEE 802.11b/g/n |
| Maximum Wireless Speed | 300 Mbps |
| Antennas | 2 x External, Fixed |
| Firewall | SPI, DoS Protection |
| VPN Support | PPTP, L2TP, IPSec Pass-through |
| QoS | Bandwidth Management |
| Encryption | WEP, WPA, WPA2 |
| DHCP Server | Yes |
| Maintenance | Keep away from dust and moisture; clean with dry cloth |
| Safety Instructions | Do not disassemble; use only provided power adapter; avoid water |
| Spare Parts & Repairability | Contact Draytek support for replacement parts; not user-serviceable |
| General Information | 144-page user manual available for download; designed for home and small office |
Frequently Asked Questions - VigorFly200 Draytek
How do I reset the Draytek VigorFly200 to factory defaults?
Locate the reset button on the back panel. Use a paperclip to press and hold it for about 10 seconds until the power LED flashes. The router will reboot and all settings will be restored to factory defaults.
What is the default IP address and login for the VigorFly200?
The default IP address is 192.168.1.1. Use username admin and password admin (or leave blank). These can be changed after first login.
How do I change the WiFi password on the VigorFly200?
Log into the router's web interface (192.168.1.1), go to Wireless LAN > Security. Enter a new pre-shared key (PSK) and click Apply. Reconnect your devices with the new password.
Can I use the VigorFly200 as a wireless access point?
Yes. Connect the WAN port to an existing network, disable DHCP server in the router's settings, and configure the LAN IP to be on the same subnet as the main network. Then enable wireless.
Why is my internet connection unstable?
Possible causes: interference from other devices, outdated firmware, or overloaded network. Try changing the WiFi channel, updating firmware via the System Maintenance menu, or reducing connected devices.
How do I update the firmware on the VigorFly200?
Download the latest firmware from Draytek's website. Go to System Maintenance > Firmware Upgrade in the web interface, select the file, and click Upgrade. Do not power off during the process.
What do the LED lights on the front panel indicate?
Power LED: solid green - on; WAN LED: solid/blinking - connection active; LAN LEDs: solid - connected, blinking - activity; WiFi LED: solid - wireless enabled, blinking - traffic.
How can I improve the WiFi range of my VigorFly200?
Place the router in a central, elevated location away from walls and metal objects. Adjust antennas to a vertical position. Reduce interference by changing the wireless channel to a less crowded one.
Is the VigorFly200 compatible with VPN services?
Yes, it supports PPTP, L2TP, and IPSec VPN pass-through. For client-based VPN, configure the connection in VPN and Remote Access menu. Note: performance may vary.
How do I block specific websites on the VigorFly200?
Go to Firewall > General Settings and enable URL Filter. Add the website URLs to the blacklist. You can also set schedule restrictions under Access Control.
User questions about VigorFly200 Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual VigorFly200 - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VigorFly200 by Draytek.