Grouw

18023 - Log splitter Grouw - Free user manual and instructions

Find the device manual for free 18023 Grouw in PDF.

📄 217 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Grouw 18023 - page 78
Pick your language and provide your email: we'll send you a specifically translated version.
Product type Vertical log splitter
Model 18023
Brand Grouw
Motor power 1500 W
Supply voltage 230 V / 50 Hz
Splitting force 5 tons
Cylinder stroke 500 mm
Dimensions (L × W × H) 900 × 400 × 600 mm
Net weight 35 kg
Hydraulic oil type ISO VG 32 or 46
Oil tank capacity 3.5 liters
Maximum noise level 85 dB(A)
Frame material Painted steel
Control type Two-hand manual lever
Main functions Splitting logs up to 500 mm length
Maintenance and cleaning Clean after each use; drain and change oil every 250 hours
Safety Two-hand locking device; overload protection
Spare parts and repairability Available via Grouw customer service

Frequently Asked Questions - 18023 Grouw

How to bleed air from the hydraulic system?
To bleed air, operate the lever empty several times in up and down position until movement becomes smooth. Check oil level after bleeding.
Which hydraulic oil to use?
Use hydraulic oil ISO VG 32 or 46. Do not mix with other types of oil.
How to adjust cutting height?
Cutting height is not adjustable on this model; the splitter accepts logs up to 500 mm length.
What to do if the splitter does not start?
First check the power supply (cable, plug, fuse). Make sure both safety levers are pressed simultaneously.
How to clean the splitter after use?
Clean wood residues with a brush and damp cloth. Do not use a pressure washer. Dry thoroughly.
What is the maximum splitting force?
The splitting force is 5 tons, sufficient for most hardwood logs.
Is it possible to split logs longer than 500 mm?
No, the cylinder stroke is limited to 500 mm. Using longer logs could damage the device.
How to maintain the motor?
The motor is maintenance-free. Keep ventilation slots clean and avoid prolonged overloads.
Where does the operating noise come from?
The noise mainly comes from the hydraulic pump and electric motor. A noise level of 85 dB(A) is normal.
What to do in case of oil leak?
Stop the device immediately and locate the leak. Contact customer service for repairs; do not use the splitter if there is a leak.

User questions about 18023 Grouw

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Log splitter in PDF format for free! Find your manual 18023 - Grouw and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 18023 by Grouw.

USER MANUAL 18023 Grouw

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Grouw

Model : 18023

Category : Log splitter