KR53CRE - Drill BLACK & DECKER - Free user manual and instructions
Find the device manual for free KR53CRE BLACK & DECKER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Hammer Drill |
| Brand | Black & Decker |
| Model | KR53CRE |
| Color | Black with orange |
| Power | 550 W |
| Supply Voltage | 230 V ~ 50 Hz |
| No Load Speed | 0 – 3000 rpm (variable) |
| Chuck | Keyless, capacity 1.5 – 13 mm |
| Hammer Action | Yes, 0 – 48000 bpm |
| Max Drilling Diameter (wood) | 25 mm |
| Max Drilling Diameter (metal) | 10 mm |
| Max Drilling Diameter (concrete) | 13 mm |
| Cord Length | 2 m |
| Weight | 1.8 kg |
| Dimensions (L x W x H) | 280 x 200 x 70 mm |
| Sound Pressure Level | 85 dB(A) |
| Warranty | 2 years |
| Accessories Included | Screwdriver bit, chuck key, auxiliary handle |
| Functions | Drilling, screwdriving, hammer drilling |
| Safety | Double insulation, spindle lock, trigger switch with lock |
| Maintenance and Cleaning | Clean with a dry cloth; avoid water and solvents |
| Spare Parts and Repairability | Available through Black & Decker after-sales service |
| Compliance | CE |
| Protection Class | II |
Frequently Asked Questions - KR53CRE BLACK & DECKER
How to change the chuck?
To change the chuck, insert the provided hex key into the opening and turn counterclockwise. Use a keyless chuck for easier replacement.
What is the power of the KR53CRE drill?
The Black & Decker KR53CRE drill has a power of 550 W, sufficient for drilling wood, metal, and concrete.
How to use the hammer function?
Turn the mode selector to the hammer symbol (usually a pictogram). Use this function only for hard materials like concrete or brick.
What to do if the drill does not start?
First check the power outlet and the power cord. Make sure the switch in the on position is not blocked. If the problem persists, have it checked by a professional.
How to adjust the speed?
The speed is variable with the trigger. More pressure increases the speed. You can also use preset speeds via the selector (1 for low, 2 for high).
Can you screw with this drill?
Yes, in drilling mode (without hammer) and with a suitable screwdriver bit. Use low torque to avoid damaging screws.
How to clean the drill?
Unplug the tool before cleaning. Wipe with a soft dry cloth. Do not use water, solvents, or abrasive products.
Which drill bits to use for concrete?
Use concrete drill bits with tungsten carbide tip. Activate the hammer function. The maximum recommended diameter is 13 mm.
Is the drill noisy?
The sound level is about 85 dB(A). Wear hearing protection for prolonged use.
Where to find spare parts?
Contact Black & Decker after-sales service or visit the official website. Parts like the chuck, carbon brushes, or handle are available.
User questions about KR53CRE BLACK & DECKER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual KR53CRE - BLACK & DECKER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KR53CRE by BLACK & DECKER.