CBG625/1N - Range hood CANDY - Free user manual and instructions

Brand	Candy
Model	CBG625/1N
Product type	Built-in extractor hood
Installation	Built into a cabinet, cutout 490 × 250 mm
Distance above cooking surface	65 to 75 cm
Power supply	220-240 V ~ 50 Hz
Recommended fuse	3 A
Electrical class	Class I (mandatory earthing)
Number of speeds	3 (low, medium, high) + stop
Lighting	LED lamp 220 V max 2 W
Filtration type	Recirculation or external extraction (Ø 150 mm)
Grease filter	Non-stick, washable (monthly cleaning)
Activated carbon filter	Optional, annual replacement
Regular maintenance	With a soft cloth and soapy water
Bulb replacement	Unscrew the cover, replace with identical LED
Motor	Electric with centrifugal fan
Noise level	Silent operation
Materials	High quality, essential design
Safety	Automatic stop not specified; do not use with naked flame

Frequently Asked Questions - CBG625/1N CANDY

How to install the Candy CBG625/1N extractor hood?

Installation is done in a cabinet with a cutout of 490 × 250 mm. Fix the hood with the 8 screws provided after removing the grease filter and panel. Maintain a distance of 65 to 75 cm above the cooking surface.

Is an exhaust duct required for this hood?

No, the hood can operate in recirculation mode with an activated carbon filter (optional) or be connected to an extraction duct of diameter 150 mm.

How to clean the grease filter?

The grease filter must be cleaned every month with a household detergent or placed in the dishwasher. A clogged filter can cause a fire risk.

How to replace the activated carbon filter?

First detach the grease filter, then insert the activated carbon filter and turn it clockwise until it locks. Replace it at least once a year.

What to do if the hood vibrates strongly?

Check that the fan blade is not damaged and that the motor is firmly attached. Make sure the unit is properly suspended. If the problem persists, call a qualified technician.

How to change the LED bulb?

Turn off and unplug the hood. Remove the lamp cover by unscrewing the 2 screws, then replace the bulb with an identical LED 220 V max 2 W.

The hood no longer turns on, what to do?

First check that the plug is properly connected and that the fuse has not blown. If the lighting does not work, replace the bulb. If the fan does not turn, contact a professional.

What is the ideal distance between the hood and the hob?

The recommended distance is 65 to 75 cm for optimal extraction.

Can I use this hood with gas appliances?

Yes, but ensure the room is well ventilated and that the extracted air does not pass through a duct used for gas fumes. Comply with local regulations.

How to maintain the hood daily?

Use a soft cloth soaked in slightly soapy warm water. Never use abrasive sponge or scouring powder. Clean the filters regularly to maintain performance.

USER MANUAL CBG625/1N CANDY

INSTALLATION AND USER'S MANUAL

CONTENT

INTRODUCTION....3

SAFETY PRECAUTION....3-4

PREPARE FOR INSTALLATION....6

SPECIFICATIONS....7

INSTALLATION....7-8

OPERATION....9

MAINTENANCE....10

TROUBLESHOOTING....11

ENVIRONMENTAL PROTECTION....11

INTRODUCTION

Thank you for choosing this cooker hood.

This instruction manual is designed to provide you with all required instructions related to the installation, use and maintenance of the appliance.

In order to operate the unit correctly and safely, please read this instruction manual carefully before installation and usage.

The cooker hood uses high-quality materials and features a streamlined design. Equipped with a large-power electric motor and centrifugal fan, it provides strong suction, low noise operation, a non-stick grease filter, and easy installation.

SAFETY PRECAUTIONS

• Never let children operate the machine.
• The cooker hood is for home use only, not suitable for barbecue, roast shops, or other commercial purposes.
• The cooker hood and its filter should be cleaned regularly to keep it in good working condition.
• Clean the cooker hood according to the instruction manual and keep the unit away from fire hazards. There is a risk of fire if cleaning is not carried out in accordance with the instructions.
• Do not place the cooker hood directly above a gas cooker with open flames.
• Please ensure good ventilation in the kitchen.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• There shall be adequate ventilation of the room when the range hood is used at the same time as appliances burning gas or other fuels.
• The air must not be discharged into a flue that is used for exhausting fumes from appliances burning gas or other fuels.
• Regulations concerning the discharge of air must be fulfilled.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Children should be supervised to ensure that they do not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision.
• Do not flame under the range hood.
• CAUTION: Accessible parts may become hot when used with cooking appliance.
• The warning shall be in the same part of the instructions that include details of how to mount the equipment.

Electrical Shock Hazard

- Only plug this unit into a properly earthed outlet. If in doubt seek advice from a suitably qualified engineer.

- Failure to follow these instructions can result in death, fire, or electrical shock.

The lamp used in this product is not suitable for use in the lighting of a room.

The purpose of this lamp is to provide illumination for using the product.

Electrical Installation

All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate.

Direct Connection

The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.

The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.

The cable must not be bent or compressed.

Regularly check the power plug and power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

WARNING: This is a Class I appliance and MUST be earthed.

This appliance is supplied with a 3 core mains cable coloured as follows:

Brown = L or Live

Blue = N or Neutral

Green and Yellow = E or Earth

The fuse must be rated at 3 Amps.

Prepare for installation:

a. If you have an outlet to the outside, your cooker hood can be connected as below picture by means of an extraction duct (enamel, aluminum, flexible pipe or inflammable material with an interior diameter of 150mm).

b. Before installation, turn the unit off and unplug it from the outlet.

c. The cooker hood should be placed at a distance of 65~75cm above the cooking plane for best effect.

Specifications

Installation

- The typical installation method for your range hood is into a purpose built overhead/wall cabinet.

- Using a jigsaw, create the required cut-out for your range hood, as 490 × 250mm

• Make sure the cut-out is at least 35mm from the cabinet edge.
• Remove the grease filter and remove the 2 screws on the panel.
• Screw the range hood into the cabinet using 8 screws (supplied).
• Re-fit the panel with the 2 screws (previously removed).

Activated carbon filter can be used to trap odors.

In order to install the activated carbon filter, the grease filter should be detached first. Press the lock and pull it downward.

Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat the same on the other side.

NOTE:

○ Make sure the filter is securely locked. Otherwise, it would loosen and cause dangerous. - When activated carbon filter attached, the suction power will be lower.

DESCRIPTION OF COMPONENTS

OPERATION

Off button 0

It's used for turning off the fan.

Low Speed button

It's used for ventilation in the kitchen. It is suitable for simmering and cooking that do not produce much steam.

Medium Speed button

Airflow speed is ideal for ventilation during standard cooking operations.

High Speed button

When high density of smoke or steam is produced, press the high-speed button for the most effective ventilation.

NOTE: If Low / Medium / High speed buttons are pressed at the same time, the unit will only operate at the highest speed.

Light button

MAINTENANCE

Before cleaning, switch the unit off and pull out the plug.

I. Regular Cleaning

Use a soft cloth moistened with hand-warm mildly soapy water or household cleaning detergent. Never use metal pads, chemical, abrasive material, or stiff brushes to clean the unit.

II. Monthly Cleaning for Grease Filter

ESSENTIAL: Clean the filter every month to prevent any risk of fire.

The filter collects grease, smoke, and dust... so the filter directly affects the efficiency of the cooker hood. If not cleaned, the grease residue (potentially flammable) will saturate the filter. Clean it with household cleaning detergent.

III. Annual Cleaning for Activated Carbon Filter

Apply SOLELY to unit that is installed as a recirculation unit (not vented to the outside). This filter traps odours and must be replaced at least once a year depending on how frequently the cooker hood is used.

III. Bulb Replacement

1. Switch the unit off and unplug the appliance.
2. Remove the lamp cover by unscrewing the 2 screws.
3. Unscrew the LED lamp.
4. Replace with the same type and lamp.

● LED lamp (220V max, 2W).

TROUBLESHOOTING

Fault	Cause	Solution
Light on, but fan does not work	The fan blade is jammed.	Switch of the unit and repair by qualified service personnel only.
	The motor is damaged.
Both light and fan do not work	light bulb burn.	Replace the bulb with correct rating.
	Power cord looses.	Plug in to the power supply again.
Serious Vibration of the unit	The fan blade is damaged.	Switch of the unit and repair by qualified service personnel only.
	The fan motor is not fixed tightly.	Switch of the unit and repair by qualified service personnel only.
	The unit is not hung properly on the bracket.	Take down the unit and check whether the bracket is in proper location.
Suction performance not good	Too long distance between the unit and the cooking plane	Readjust the distance to 65-75cm

ENVIRONMENTAL PROTECTION

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.

This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.

The symbol on the product indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Disposal must be carried out in accordance with local environmental regulations for waste disposal.

For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Note:

Installation

Troubleshooting

INSTALLATION....38-39

OPERATION 40

MAINTENANCE 41

TROUBLESHOOTING 42

ENVIRONMENTAL PROTECTION 42

INTRODUCTION

Blue = N or Neutral

Installation

TROUBLESHOOTING

The appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3mm between the contacts.

The cable must not be bent or compressed.

Installation

NOTE:

TROUBLESHOOTING

Installation

NOTE:

TROUBLESHOOTING

Blue = N or Neutral

Installation

TROUBLESHOOTING

Installation

NOTE:

Installation

NOTE:

The lamp used in this product is not suitable for room lighting.

Installation

The activated carbon filter can be used to absorb odors. To install the activated carbon filter, the grease filter should first be installed. Press the lock and pull it downward.

TROUBLESHOOTING

c. For optimal efficiency, install the kitchen hood 65-75 cm above the cooking surface.

Specifications

Installation

Install the activated carbon filter into the unit and turn it clockwise. Repeat the same on the other side.

NOTE:

TROUBLESHOOTING

Installation

NOTE:

INSTALLATION

NOTE:

Installation

NOTE:

Installation

NOTE:

TROUBLESHOOTING