CLS-AOCH/60-164 - Cables for Computers and Peripherals Kramer - Free user manual and instructions

Product Type	Active Optical UHD Pluggable HDMI Cable
Model	CLS-AOCH/60-164 (LSHF version)
Video Resolution	Up to 4K@60Hz (4:4:4), 3D, Deep Color
Audio Support	PCM 8ch, Dolby True HD, DTS-HD Master Audio
HDMI Compliance	EDID, CEC, HDCP 2.2, HDR
Connector Type	Male HDMI Type A (Source and Display ends)
Cable Structure	Hybrid Optical Fiber (4 fibers + 6 AWG 28 wires)
Jacket Material	Low Smoke Halogen Free (LSHF), black
Cable Diameter	3.4 mm
Bending Radius	6 mm
Pulling Strength	500 N (50 kg / 110 lbs)
Length	164 ft (60 m)
Power Supply	External 5V via micro-USB on Display side (optional)
Power Consumption	0.75 W max
Operating Temperature	0° to +50°C (32° to 122°F)
Storage Temperature	-30° to +70°C (-22° to 158°F)
Humidity	5% to 85% RH non-condensing
Assembly Dimensions (W×D×H)	22.2 mm × 71 mm × 9.9 mm (0.874" × 2.79" × 0.39")
Key Features	Plug and Play; slim design; reduced EMI/RFI; source/display labels; includes pulling tool
Safety	Disconnect power before servicing; do not disassemble connectors; avoid sharp bends or kinks
Maintenance	Inspect cable for physical damage; ensure connectors are fully inserted; clean with dry cloth if needed

Frequently Asked Questions - CLS-AOCH/60-164 Kramer

What is the maximum video resolution supported by the CLS-AOCH/60-164?

The cable supports resolutions up to 4K@60Hz with 4:4:4 chroma subsampling, as well as 3D and Deep Color.

Is this cable compatible with HDCP 2.2 and HDR?

Yes, the cable is fully compliant with HDCP 2.2 and supports HDR (High Dynamic Range), along with EDID and CEC.

What lengths are available for this cable?

The CLS-AOCH/60-XX series comes in lengths from 33 ft (10 m) to 328 ft (100 m). The specific model CLS-AOCH/60-164 is 164 ft (60 m) long.

Does the cable require external power?

Power is typically supplied via the HDMI connection, but if needed, an external 5V power supply can be connected to the micro-USB port on the Display side.

How do I install the cable through conduits?

Use the included pulling tool: place the micro-HDMI connector inside the tool, close it, attach a pulling cable, and carefully pull through the conduit. Ensure the cable polarity is correct (Source or Display tagged end).

What is the minimum bend radius of this cable?

The minimum bend radius is 6 mm. Avoid sharp bends or kinks to prevent damage to the optical fibers.

Can I use this cable with standard HDMI devices?

Yes, the cable has standard HDMI Type A connectors and is compatible with any HDMI source and display device, such as PCs, Blu-ray players, projectors, and TVs.

What should I do if I get no picture or sound?

Check that both devices are powered on, the connectors are fully inserted, the cable is not physically damaged, and the ends are connected correctly: Source to source, Display to display. Also verify the cable is not bent or kinked.

Is the cable suitable for outdoor digital signage?

Yes, the cable is designed for professional AV systems including indoor and outdoor digital signage, but ensure the operating temperature range (0 to 50°C) is respected.

Does the cable support multi-channel audio?

Yes, it supports PCM 8-channel audio as well as compressed formats like Dolby True HD and DTS-HD Master Audio.

USER MANUAL CLS-AOCH/60-164 Kramer

Installation Instructions

MODELS:

CLS-AOCH/60-XX (Low Smoke & Halogen Free Version)

CP-AOCH/60-XX (Plenum Version)

Active Optical UHD Pluggable HDMI Cable

P/N:

Rev:

SAFETY WARNING

Disconnect the unit from the power supply before opening and servicing

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found.

We welcome your questions, comments, and feedback.

www.kramerAV.com

[e-mail]

CLS-AOCH/60-XX / CP-AOCH/60-XX Active Optical UHD Pluggable HDMI Cable

Congratulations on purchasing your Kramer CLS-AOCH/60-XX / CP-AOCH/60-XX Plug and Play active Fiber Optic UHD Pluggable HDMI Cable which is suited for critical and versatile installations.

The CLS-AOCH/60-XX / CP-AOCH/60-XX provides an extremely high quality signal over a wide range of resolutions, up to 4K@60Hz (4:4:4). This cable is available in different lengths from 33ft (10m) to 328ft (100m). The CLS-AOCH/60-XX / CP-AOCH/60-XX has a slim design to let you pull the cables easily (together with the supplied pulling tool) through small-sized conduits.

Two identical black USB connectors labeled 'KRAMER' with gold contacts, shown from different angles (no text beyond branding)

Figure 1: HDMI Connector plugs (Source and Display)

The CLS-AOCH/60-XX / CP-AOCH/60-XX is ideal for long distance transmission in professional AV systems, indoor and outdoor digital signage and kiosks, home theater systems, surgical theaters, facility automation systems and whenever high resolution video and audio are required.

Features

The CLS-AOCH/60-XX / CP-AOCH/60-XX:

• Supports a wide range of resolutions up to 4K@60Hz (color space 4:4:4) 3D and Deep Color
• Supports Multi-channel audio, Dolby True HD, DTS-HD Master Audio
• Is HDMI compliant: EDID, CEC, HDCP (2.2), HDR (High Dynamic Range)
- Reduced EMI and RFI
- Includes a micro USB port to optionally connect an external 5V power supply (if required, this is typically connected on the display side)
• Has high pulling strength and compression load
- Has Source / Display clearly printed on the connector as well as tagged on the cable for easy identification

Cable Dimensions

The CLS-AOCH/60-XX / CP-AOCH/60-XX includes four optical fibers and six AWG 28 wires with compact size HDMI connectors. On the source side, the micro HDMI connector enables smooth pulling of the cable. The SOURCE end connects to the source (for example, a DVD, Blu-ray or game console box) and the DISPLAY end to the acceptor (for example, a projector, an LCD display or a tablet device), see Figure 2 (note that SOURCE appears here as an example).

Figure 2: HDMI Connectors – SOURCE and DISPLAY (with Dimensions in mm)

CLS-AOCH/60-XX / CP-AOCH/60-XX Plug and Play Installation

Before installing the cable, make sure that you have an HDMI graphic card or devices with an HDMI port (for example, a PC, laptop, DVD/Blue-ray player or any other video/audio signal source device).

Optical fiber cable is not robust physically compared to conventional copper cable materials. Even though this cable is designed to be resistant to artificial strengths on the cable, CLS-AOCH/60-XX / CP-AOCH/60-XX can be damaged if it is excessively pinched, twisted or kinked when being installed and after being installed. Take care not to bend or twist the cable tightly.

When CLS-AOCH/60-XX / CP-AOCH/60-XX is installed into the conduit, the fiber pulling strength and the bending radius are the key conditions to safe installation of the cable.

Do not disassemble or modify the products, especially the HDMI connector head parts.

To install the CLS-AOCH/60-XX / CP-AOCH/60-XX:

1. Unpack the cable from the package with care and remove the cable tie.
2. Place the micro-HDMI (Type D) connector inside the Pulling Tool and close its cover.

Note that you can pull the cable either from the display side or the source side (as shown in Figure 3), but you have to make sure that the cable polarity is correct (tagged Source if pulling the source side or Display if pulling the display side).

1. Attach the pulling cable to the Pulling Tool.

Figure 3: Attaching the Pulling Tool

1. Carefully install the cable (for example, in the wall or conduit or under the floor).

2. Connect the:

3. SOURCE HDMI adaptor to the micro-HDMI connector SOURCE end of the cable.
   ■ DISPLAY HDMI adaptor to the micro-HDMI connector DISPLAY end of the cable.

4. Secure the connection on each side using the supplied locking screws.

5. Plug the SOURCE connector head of the cable into the source devices. Do not plug the SOURCE connector to the display device.

6. Plug the DISPLAY connector head of the cable into the display devices. Do not plug the DISPLAY connector to the source device.

7. Switch on the power of the source and display devices.

8. If required, connect an external power source via the micro-USB connector on the DISPLAY side.

Troubleshooting

If you have encountered a problem, check that:

• The source and display devices are both switched on
• Both HDMI connector heads are fully plugged into the devices
• The cable or its jacket is not physically damaged
• The cable is not bent or kinked

Note that it is important to connect the cable correctly as marked on the end of each connector: SOURCE to the source side and DISPLAY to the acceptor side.

Specifications

Audio and Power
Video Resolution:	Up to 4K@60Hz (4:4:4)
Embedded Audio Support:	PCM 8ch, Dolby Digital True HD, DTS-HD Master Audio
HDMI Support:	HDCP 2.2, HDR, EDID, CEC
Cable Assembly
HDMI Connector:	Male HDMI Type A Connector
Dimensions:	Micro HDMI port: 1.23cm x 4.9cm x 0.8cm (0.484" x 1.93" x 0.31") W, D, HType A HDMI port: 3.1cm x 4cm x 0.95cm (1.22" x 1.57" x 0.37") W, D, HAssembly: 2.22cm x 7.1cm x 0.99cm (0.874" x 2.79" x 0.39") W, D, H
Cable Structure:	Hybrid Optical Fiber Cable
Cable Jacket Material:	UL Plenum (CMP-OF) and LSHF (Low Smoke Halogen Free)
Cable Jacket Color:	UL Plenum: black; LSHF: black
Cable Diameter:	3.4mm	Cable Bending Radius:	6mm
Cable Pulling Strength:	500N (50kg, 110lbs)	Micro USB Cable	External 5V power supply cable
Power
Power Supply HDMI:	Power is supplied from an external USB connector on the display side
Power Consumption:	0.75W max.
General
Operating Temperature:	0° to +50°C (32° to 122°F)	Storage Temperature:	-30° to +70°C (-22° to 158°F)
Operating Humidity:	5% to 85%, RHL non-condensing
Available Length:	33ft (10m), 50ft (15m), 66ft (20m), 98ft (30m), 131ft (40m), 164ft (50m), 197ft (60m), 230ft (70m), 262ft (80m), 295ft (90m) and 328ft (100m)