MTF55W12E - Freezer MATSUI - Free user manual and instructions

Product Type	Upright Freezer
Brand	Matsui
Model	MTF55W12E
Overall Dimensions (W x D x H)	550 x 580 x 1430 mm
Net Frozen Food Storage Volume	165 L
Freezing Capacity	8 kg / 24 hr
Energy Consumption	0.61 kWh / 24h (222 kWh/year)
Energy Class	A+
Climate Class	N (16°C - 32°C)
Noise Level	42 dB
Defrost Type	Manual Defrost
Temperature Control	Thermostat dial (MIN, MED, MAX)
Fast Freeze Function	Yes (MAX setting)
Door Reversible	Yes (right or left opening)
Number of Drawers	6 (5 upper + 1 lower)
Storage Temperature	≤ -18°C
Rated Voltage	220-240 V~
Rated Current	0.55 A
Temperature Rise Time	16 hours
Levelling Feet	Yes (adjustable at front)
Rear Spacers	Included (2 pieces)
Interior Accessories	Removable drawers
Cleaning	Weak bicarbonate soda solution for interior; damp cloth for exterior
Defrosting Method	Scrape frost with plastic scraper; bowl of hot water to speed up
Safety Features	Lock (key out of reach), no flammable storage, child safety

Frequently Asked Questions - MTF55W12E MATSUI

What is the net storage volume of the Matsui MTF55W12E freezer?

The net frozen food storage volume is 165 litres.

How do I reverse the door swing on this freezer?

To reverse the door, you need a Phillips screwdriver, flat bladed screwdriver, and hexagonal spanner. Unplug the freezer, remove the top cover, upper hinge, door, bottom hinge, and adjustable feet. Reverse the bottom hinge bracket, reassemble, and adjust the levelling feet. It is recommended to have two people assist and to tilt the unit backward. Detailed steps are in the manual.

What is the recommended temperature setting for normal use?

The recommended setting is MED (between MIN and MAX). This is suitable for normal room temperatures between 16°C and 32°C. The internal temperature should be at least -18°C.

How do I use the fast freeze function?

Turn the thermostat control dial to MAX to activate fast freezing. This operates the freezer at its coldest temperature (approx. -28°C) to quickly freeze fresh food. After 24 hours, return the dial to MED for normal operation. Do not freeze large quantities at once.

How often should I defrost the freezer?

Defrost when the frost layer reaches about 10 mm (0.39 inches) thick. Remove food, unplug the unit, open the door, and scrape frost with a plastic scraper. You can place a bowl of hot water inside to speed up defrosting. Clean after defrosting.

What is the energy consumption of the MTF55W12E?

The freezer consumes 0.61 kWh per 24 hours (222 kWh per year) under standard test conditions. Actual consumption depends on usage and location.

Can I install the freezer in a garage or outdoors?

No, this freezer is not designed for garage or outdoor installation. It should be placed in a well-ventilated room with ambient temperatures between 16°C and 32°C, away from heat sources and direct sunlight.

What safety precautions should I follow?

Do not store flammable substances or glass bottles in the freezer. Ensure the refrigerant circuit is not damaged (refrigerant is combustible). Keep the lock key away from children. Do not use electrical appliances inside the freezer unless recommended by the manufacturer. Only authorised personnel should service the unit.

How do I clean the freezer?

Clean the interior with a weak solution of bicarbonate soda and warm water, then rinse and dry. Wash drawers in warm soapy water. Use a damp cloth for the exterior. Vacuum the condenser grille at the back with a soft brush.

What is the freezing capacity of this model?

The maximum freezing capacity is 8 kg per 24 hours. Do not exceed this amount when adding fresh food.

USER MANUAL MTF55W12E MATSUI

White rectangular refrigerator inside a circular frame, no visible text or symbols on the appliance.

Contents

GB

Unpacking....5

Installation....6

Location 6

Reversing the Door Swing 6

Rear Spacer 9

Levelling the Unit....10

Cleaning Before Use ....10

Before Using Your Unit....10

Interior Accessories....10

Product Overview....11

Operation....12

Switching On Your Unit....12

Adjusting the Temperature....12

Fast Freezing 12

Noises Inside the Unit!......12

Shopping for Frozen Foods 13

Preparations for Freezing 13

Defrosting Frozen Food....14

Cleaning....15

Defrosting....15

Cleaning the Interior and the Exterior of the Unit....15

Cleaning Tips....15

Maintenance....16

Care When Handling....16

Servicing 16

Switching Off for Long Periods of Time 16

Disposal 16

Specifications....17

Safety Warnings....75

Innholdsfortegnelse

NO

Pakke opp ....19

Installasjon 20

Plassering....20

Bytte dørhengslingen....20

Avstandsholder bakside 23

Thank you for purchasing your new Matsui Freezer.

We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers.

Read all the safety instructions carefully before use and keep this instruction manual for future reference.

GB

Unpacking

Remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations.

The following items are included:

Line drawing of a single refrigerator with lid and frontrest (no text or symbols)

The Main Unit

Upper Freezer Drawers x 5 P.N.: 20012847

Simple line drawing of a rectangular box with a handle and four small dots on the front face (no text or symbols)

Lower Freezer Drawer P.N.: 20013559

Rear Spacer x 2 P.N.: 20016077

Instruction Manual P.N.: MTF55W12E-001

Location

When selecting a position for your unit you should make sure the floor is flat and firm, and the room is well ventilated with an average room temperature of between 16^ C and 32^ C. Avoid locating your unit near a heat source, e.g. cooker, boiler or radiator. Also avoid direct sunlight as it may increase the electrical consumption. Extreme cold ambient temperatures may also cause the unit not to perform properly. This unit is not designed for use in a garage or outdoor installation. Do not drape the unit with any covering.

When installing the unit, ensure that 100 mm of free space is left at both sides, 100 mm at the rear and 300 mm at the top of the unit. The door can be opened to the right or the left, depending on what better suits the location. Please ensure there is adequate space for the door to fully open.

• If you want to have the door swing reversed, we recommend that you contact a qualified technician. You should only try to reverse the door yourself if you believe that you are qualified to do so.
• All parts removed must be saved to do the reinstallation of the door. You should rest the unit on something solid so that it will not slip during the door change process. Do not lay the unit flat as this may damage the coolant system. Ensure the unit is unplugged and empty.

Reversing the Door Swing

Tools required: Phillips style screwdriver / Flat bladed screwdriver / Hexagonal spanner

• Ensure the unit is unplugged and empty.
• Adjust the two levelling feet to their highest position.
• To take the door off it is necessary to tilt the unit backwards. You should rest the unit on something solid so that it will not slip during the door reversing process.
• All parts removed must be saved to do the reinstallation of the door.

• Do not lay the unit flat as this may damage the coolant system.
  • We recommend that 2 people handle the unit during assembly.

• Tilt the unit slightly towards the rear and prop it securely. Two people are required to tilt the unit during the door reversal process.

Illustration of two workers exchanging a large box, no text or symbols present

INSTALLATION

1. Remove the 2 screws on the back.
2. Remove the thermostat knob and then carefully lift the top cover away from the freezer.
3. Remove the three screws, then remove the upper hinge that holds the door in place. Lift the door and place it on a padded surface to prevent it from scratching.
4. Remove the screws and bottom hinge. Then remove the adjustable feet from both side.

INSTALLATION

1. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.

1. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.

1. Place the door back on. Ensure the door is aligned horizontally and vertically so that the seals are closed on all sides before finally tightening the top hinge.

INSTALLATION

1. Put the top cover and the thermostat knob back.

1. Screw the 2 screws on the back.

1. With the door closed, check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the levelling feet as needed.

Simple line drawing of a rectangular cabinet or enclosure (no text or symbols)

Rear Spacer

Screw the rear spacers at the rear of the unit.

* All images are for reference only; please refer to your individual unit for actual item.

Levelling the Unit

To do this adjust the two levelling feet at the front of the unit.

If the unit is not level, the door and magnetic seal alignments will not be covered properly.

Cleaning Before Use

Wipe the inside of the unit with a weak solution of bicarbonate soda. Then rinse with warm water using a 'wrung-out' sponge or cloth. Wash the drawers in warm soapy water and dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.

If you require more information refer to the Cleaning section.

• Before Plugging in YOU MUST

Check that you have a socket which is compatible with the plug supplied with the unit.

• Before Turning On!

Do not turn on until two hours after moving the unit. The coolant fluid needs time to settle.

Before Using Your Unit

Before placing any food in your unit, turn it on and wait for 24 hours, to make sure it is working properly and to allow it time to fall to the correct temperature. Your unit should not be overfilled.

Interior Accessories

In order to make the most of the volume of the frozen-food storage compartment, the user can remove one or more drawers, out of the appliance, according to your daily use.

Switching On Your Unit

1. Connect the mains cable to the mains socket. The internal temperature of your unit is controlled by a thermostat. There are six setting MIN, MED and MAX.
2. After the unit has been on for 20 minutes adjust the thermostat control dial to MED. This is the recommended setting when operating at normal room temperature (between 16 and 32°C).
3. The unit may not operate at the correct temperature if it is in a particularly hot or a particularly cold room, or if you open the door often.
4. To ensure that the unit is cool enough to sufficiently chill your food, wait 24 hours before filling it with food.
5. If you are concerned that your unit is not being kept cold enough and wish to check the temperature, you will need a special fridge/freezer thermometer. These are available from most supermarkets and hardware shops.

Place the thermometer in the centre of the unit, where it can be read easily. Leave overnight, the temperature in the unit should be between -18^ or lower.

Adjusting the Temperature

The internal temperature of the unit is controlled by a thermostat. MAX position is the coldest setting and it is used for fast freezing. The recommended position is between MIN and MAX, but it should be adjusted according to the environment.

Fast Freezing

Fresh food should be frozen as quickly as possible. Setting MAX makes your unit operate at its coldest temperatures (approximately -28^ ) continuously. It helps to quickly freeze and retain more of the goodness of your food. Freezing will be completed after 24 hours. After freezing your food turn the thermostat control dial back to MED ( -18^ ). Never freeze large quantities of fresh food at one time.

Noises Inside the Unit!

You may notice that your unit makes some unusual noises. Most of these are perfectly normal, but you should be aware of them!

These noises are caused by the circulation of the refrigerant liquid in the cooling system. It has become more pronounced since the introduction of CFC free gases. This is not a fault and will not affect the performance of your unit. This is the compressor motor working, as it pumps the refrigerant around the system.

Shopping for Frozen Foods

- Your unit is 4-star ✱***

When you are buying frozen food, check the storage guidelines on the packaging. You will be able to store each item of frozen food for the period shown against the 4-star rating. This is usually the period stated as "Best before" on the front of the packaging. The maximum freezing capacity of this freezer is shown on the rating plate. Do not place fresh food into the freezer compartment with combined weight that exceeds the maximum weight as stated on the rating plate.

• Check the temperature of the frozen food cabinet in the shop where you buy your frozen foods. It should show a temperature lower than -18°C.
  • Take a quick look at the frozen food package and make sure it is in perfect condition.
• Always buy frozen products last on your shopping trip or visit to the supermarket. Try to keep frozen food together whilst shopping and on the journey home as this will help to keep the food frozen.
• Don't buy frozen food unless you can freeze it straight away. Specially insulated bags can be bought from most supermarkets and hardware shops. These bags can keep frozen food frozen longer.

Preparations for Freezing

• Use quality food and handle it as little as possible. Freeze food in small quantities as it freezes faster, takes less time to defrost and enables you to control the quantity you need better.
• Leave cooked food to cool completely. Chill food before freezing if possible.
• Consider how you will want to cook the food before freezing it.
• Don't freeze food in metal containers if you may want to microwave it straight from the freezer.
• Use special freezer bags, freezer film, polythene bags, plastic containers, and aluminium foil (heavy duty grade only). If in doubt, double wrap your food. Don't use aluminium foil for acidic foods, e.g. citrus fruits. Don't use thin cling film, glass, or used food containers without cleaning.
• Exclude as much air from the container as possible. You could buy a special vacuum pump which sucks excessive air out of the packaging.
• Leave a small amount of air space when freezing liquids to allow expansion.
• You can use the space in the freezer most efficiently if you freeze liquids (or solids with liquids, e.g. stew) in square blocks. This is known as "Preforming". Pour the liquid into a polythene bag which is inside a square sided container. Freeze it, and then remove it from the container and seal the bag.
• Label your frozen foods as they will look the same when in frozen state. Use special freezer tapes, labels and pens with different colours. This allows you to easily organise and to effectively use the freezer. Write the contents and date; otherwise the frozen food might exceed the storage time and this could cause food poisoning. Please refer to your food packaging for the recommended storage time.
• You may also add the weight and cooking notes, e.g. "defrost first", "cook from frozen" and keep a separate log of what is in each drawer. This will save opening the door and searching around unnecessarily.

Illustration of a hand pouring liquid from a container into a container with a lid (no text or symbols)

Defrosting Frozen Food

1. Take the frozen food out from the unit and uncover the frozen food. Let it defrost at room temperature. Don't forget that defrosting in a warm area encourages the growth of bacteria and low temperature cooking may not destroy dangerous bacteria.
2. Drain off and throw away any liquid lost during defrosting.
3. Always make sure there are no ice-crystals in the food before cooking, particularly with meat. These crystals indicate that the food has not fully defrosted.
4. Cook food as soon as possible after defrosting.
5. Many microwaves and ovens have a defrost setting. To avoid bacterial build up, only use these if you intend to cook the food immediately afterwards.

Never refreeze anything that has been defrosted out unless you cook it again, to kill off harmful bacteria. Never re-freeze defrosted shellfish. Re-seal packs properly after removing items. This prevents drying or freezer-burn and a build up of frost on any remaining food.

Defrosting

Frost might build up in the unit after it has been used for a period of time. Scrape away the frost using a plastic scraper (not included).

Do not use a metal or sharp instrument to scrape away the frost, nor should you use any electrical appliances to aid defrosting.

GB

We recommend that defrosting should be carried out when the frost layer builds up to 10mm (\~0.39"). Choose a time when the stock of frozen food is low, follow these procedures:

1. Take out the food, turn the unit off at the mains supply and leave the door open. Ideally, the frozen food should be put into another freezer. If this is not possible, wrap the food in several sheets of newspaper or large towels and then a thick blanket to keep it cool.

2. Place a shallow bowl or pan below the unit. Scrape away the frost using the plastic scraper. Defrosting the remaining frost can be speeded up by placing a bowl of hot water inside the unit and closing the door. As the solid frost loosens, scrape it away with the plastic scraper and remove.

3. When defrosting is complete, clean your unit's interior and exterior.

Simple illustration of a kitchen spatula with handle and screwdriver (no text or symbols)

Cleaning the Interior and the Exterior of the Unit

• Remove all the drawers before cleaning.
• Wipe the inside of the unit with a weak solution of bicarbonate soda and then rinse with warm water using a 'wrung-out' sponge or cloth. Wipe completely dry before replacing the drawers.
• Use a damp cloth to clean the exterior, and then wipe with a standard furniture polish. Make sure that the door is closed to avoid the polish getting on the magnetic door seal or inside the unit.
• The grille of the condenser at the back of the unit and the adjacent components can be vacuumed using a soft brush attachment.

Cleaning Tips

Condensation may appear on the outside of the unit. This may be due to a change in room temperature. Wipe off any moisture residue. If the problem continues, please contact a qualified technician for assistance.

Maintenance

Care When Handling

Hold the unit around its sides or base when moving it. Under no circumstances should it be lifted by holding the edges of the top surface.

Servicing

The unit should be serviced by an authorised engineer and only genuine spare parts should be used. Under no circumstances should you attempt to repair the unit yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact a qualified technician.

Switching Off for Long Periods of Time

When the unit is not in use for a long period of time, disconnect it from the mains supply, empty all food and clean the appliance, leaving the door ajar to prevent unpleasant smells.

Disposal

Old units still have some residual value. An environmentally friendly method of disposal will ensure that valuable raw materials can be recovered and used again. The refrigerant used in your unit and insulation materials require special disposal procedures. Ensure that none of the pipes on the back of the unit are damaged prior to disposal.

Up to date information concerning options of disposing of your old unit and packaging from the new one can be obtained from your local council office.

When disposing of an old unit break off any old locks or latches and remove the door as a safeguard.

Specifications

Model MTF55W12E
Appliances Category Category 8 (Upright Freezer)
Overall Dimension (W x D x H) 550 x 580 x 1430 mm
Net Frozen Food Storage Volume 165L	***
Defrosting Type Manual Defrost
Climate Class N
This appliance is intended to be used at an ambient temperature between 16°C and 32°C.
Storage Temperature ≤ -18°C
Energy Consumption 0.61kWh / 24h
Energy consumption 222 kWh per year, based on standard test results for 24 hours. Actual energy consumption will depend on how the appliance is used and where it is located.
Airborne Acoustical Noise 42dB
Energy Grading A+
EU Ecolabel N/A
Temperature Rise Time 16 hrs
Freezing Capacity 8 kg / 24 hr
Rated Voltage	220-240V~
Rated Current	0.55A

Features and specifications are subject to change without prior notice.

Normal energy consumption Increased energy consumption

Installation site

In a ventilated room. In an enclosed, unventilated room.

Protected from direct sunlight. In direct sunlight.

Not situated near to a heat source (radiator, oven).

Where the ideal ambient room temperature is approx 20^ C.

Situated near to a heat source (radiator, oven).

Where there is a high ambient room temperature.

Use

Only open the doors when necessary and for as short a time as possible.

Store food in an organised way. If food

Allow hot food and drinks to cool down before placing them in the unit.

Store food covered or packaged. The e

Do not over-fill the appliance to allow air to circulate.

Frequent opening of the doors for long periods will cause a loss of coldness.

is not stored in an organised way, searching for an item will mean the door is open for longer.

Placing hot food in the unit will cause the compressor to run for a long time, as the unit will have to work harder to lower the temperature.

Corporation or condensation of liquids will cause a loss of coldness in the unit.

Defrosting

Defrost the unit when a layer of ice 1 cm thick has built up.

A layer of ice hinders the cold from reaching the frozen food, and causes an increase in energy consumption.

Takk for at du kjøpte ny Matsui fryser.

Line drawing of a single refrigerator with lid and frontrest (no text or symbols)

Hovedenheten

∅vre fryerskuffer x 5 Delnr.: 20012847

Simple line drawing of a rectangular box with a handle and four small dots on the side (no text or symbols)

Nedre fryserskuff Delnr.: 20013559

Avstandsholder bakside x 2 Delnr.: 20016077

Bruksanvisning Delnr.: MTF55W12E-001

Plassering

Illustration of two workers exchanging a large box, no text or symbols present

INSTALLASJON

INSTALLASJON

1. Fest de to skruene på baksiden.

1. Se etter at døren, när den er lukket, har riktig innretning både vannrett og loddrett samt at pakningene er lukket på alle sidene för du til slutt strammer det nederste hengslet. Juster nivåføttene på nytt etter behov.

Simple line drawing of a rectangular cabinet or refrigerator (no text or symbols)

Avstandsholder bakside

Rengjøring før bruk

Justere temperaturen

Illustration of a hand pouring liquid from a container into a container with a lid (no text or symbols)

Tine frossen mat

Simple illustration of a kitchen spatula with handle and screwdriver (no text or symbols)

Line drawing of a single refrigerator with lid and frontrest (no text or symbols)

Huvudenhet

Simple line drawing of a rectangular box with a handle and small dots on the front face (no text or symbols)

Nedre fryslåda Art.nr.: 20013559

Bakre distanser x 2 Art.nr.: 20016077

Bruksanvisning Art.nr.: MTF55W12E-001

Plats

Illustration of two workers exchanging a large box, no text or symbols present

INSTALLATION

INSTALLATION

Simple line drawing of a rectangular cabinet or refrigerator (no text or symbols)

Bakre distanser

Illustration of a hand pouring liquid from a container into a container with a lid (no text or symbols)

Tina upp fryst mat

Simple illustration of a gray spatula with a handle and circular end (no text or symbols)

Line drawing of a single refrigerator with lid and frontrest (no text or symbols)

Laite

Yläpakastinlokero x 5 Osanro: 20012847

Simple line drawing of a rectangular box with a handle and four small dots on the front face (no text or symbols)

Alapakastinlokero Osanro: 20013559

Illustration of two workers exchanging a large cardboard box (no text or symbols present)

ASENNUS

Simple line drawing of a rectangular cabinet or storage unit (no text or symbols)

Takavälikappale

Illustration of a hand pouring liquid from a container into a container with a lid (no text or symbols)

Pakastetun ruoan sulatus

Simple illustration of a gray spatula with measurement markings (no text or symbols)

Line drawing of a single refrigerator with lid and frontrest (no text or symbols)

Hovedenheden

∅vre skuffe til fryser x 5 P.N.: 20012847

Simple line drawing of a rectangular box with a handle and four small dots on the front face (no text or symbols)

Illustration of two workers exchanging a large cardboard box (no text or symbols present)

INSTALLATION

INSTALLATION

Simple line drawing of a rectangular refrigerator with no text or symbols

Rengøring før brug

Illustration of a hand pouring liquid from a container into a container with a lid (no text or symbols)

Simple illustration of a gray spatula with a handle and circular end (no text or symbols)

DK

For your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below.

• Read all instructions carefully before using the unit and keep them for future reference.
• Retain the manual. If you pass the unit onto a third party, make sure to include this manual.
  • This unit is intended to be used in household and similar applications such as
• staff kitchen areas in shops, offices and other working environments;
• farm houses and by clients in hotels, motels and other residential type environments;
• bed and breakfast type environments;
• catering and similar non-retail applications.

- Ensure that the plug is easily accessible to enable disconnection from the mains supply.

- Keep ventilation openings in the unit enclosure clear of obstructions.

- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

- Do not use electrical appliances inside the food storage compartments of the unit, unless they are of the type recommended by the manufacturer.

- If the mains cable is damaged, it must be replaced by the manufacturer, its service agent or a qualified technician in order to avoid a hazard.

- Choose a location for your unit away from heat sources such as radiators or fires as refrigerant and vesicant are burnable.

- Do not damage the refrigerant circuit (The refrigerant is a very environmentally friendly gas but is also combustible. Take care when transporting or moving the unit to ensure that the refrigeration circuit is not damaged. In the event of damage avoid naked flames or ignition sources and ventilate the room in which the unit is placed for a few minutes.)

• The unit must be manoeuvred by a minimum of 2 persons.

- This unit is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instructions concerning the use of the unit by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the unit.

- If your unit is fitted with a lock to prevent children being trapped inside, keep the key out of reach and not in the vicinity of the unit.

- Do not store volatile or flammable substances, such as aerosol cans with a flammable propellant, in the unit.

- Do not store bottles or glass containers in the freezer compartment. Contents can expand when frozen (fizzy drinks) which may break the bottle and damage your freezer compartment.

WARNING

IT IS HAZARDOUS FOR ANYONE OTHER THAN AUTHORISED SERVICE PERSONNEL TO CARRY OUT SERVICING OF REPAIRS WHICH INVOLVE THE REMOVAL OF COVERS.

TO AVOID THE RISK OF AN ELECTRICAL SHOCK DO NOT ATTEMPT REPAIRS YOURSELF.

This symbol on the product or in the instructions means that your electrical and electronic equipment should be disposed at the end of its life separately from your household waste. There are separate collection systems for recycling in the EU.

For more information, please contact the local authority or your retailer where you purchased the product.

NO