R1411F - Refrigerator UPO - Free user manual and instructions

Type	Refrigerator-freezer (fridge and freezer compartments)
Brand	UPO
Model	R1411F
Climate Class	SN, N, ST, T (from +10°C to +43°C)
Freezer Compartment	Four-star (****) rating, suitable for freezing fresh food and long-term storage
Refrigerator Compartment	For fresh food storage above 0°C
Control Type	Thermostat dial (A) for temperature adjustment and on/off
Reversible Door	Yes, door opening direction can be changed
Adjustable Legs	Two front adjustable legs for leveling
Rear Wheels	Yes (on certain models) for easier positioning
Defrosting Refrigerator	Automatic (auto-defrost) – ice melts when compressor is off
Defrosting Freezer	Manual – defrost when frost layer is 3-5 mm
Lighting	Replaceable interior light bulb
Safety Features	Child safety (use by children 8+ under supervision); keep ventilation openings clear; do not damage refrigerant circuit
Installation Clearance	At least 5 cm clearance above the appliance for condenser cooling
Standing Time Before First Use	2 hours in upright position after transport
Power Supply	Standard household electrical outlet with grounding
Cleaning	Use mild detergent and soft cloth; avoid abrasives, acids, solvents
Environmental Disposal	Do not dispose as household waste; recycle at authorized collection points
Spare Parts Availability	Contact authorized service center for replacements (e.g., seals, bulbs)

Frequently Asked Questions - R1411F UPO

How do I set the temperature on my UPO R1411F refrigerator?

Rotate the thermostat dial (A) clockwise to cooler settings (thicker part of the marking) or counterclockwise to warmer settings. The dial also serves as the on/off switch.

Can I change the door opening direction?

Yes, the door is reversible. Use a socket wrench (Nr. 8) and screwdrivers. Follow the steps in the manual: remove top hinge cover, swap top-hinge components, reposition bottom hinge, and adjust leveling feet. Ensure the appliance is unplugged and tilted backward.

How do I defrost the freezer?

When frost is 3-5 mm thick, 24 hours before defrosting set dial to max. Remove food, unplug, leave door open. Use a plastic scraper to remove frost, wipe dry. Do not use electrical appliances or sharp objects.

Why is there water on the floor or inside the fridge?

Check if the drain opening is blocked (clean with a plastic straw). Ensure the evaporator pan is correctly placed, and the door is properly closed.

The refrigerator is making unusual noises. What should I do?

Ensure the appliance is level and not touching walls or cabinets. Vibration can come from loose interior parts or cans touching. A humming or gurgling sound is normal from refrigerant flow.

How do I clean the appliance?

Unplug the appliance. Use a soft cloth with warm water and mild detergent. For exterior, use a mild suds solution. Do not use abrasive cleaners, solvents, or alcohol on plastic parts. Clean the drain opening regularly.

Why is food freezing in the refrigerator compartment?

The thermostat may be set too cold. Adjust to a warmer setting. Also ensure food is not touching the back wall (cooling surface). Air vents should not be blocked.

What should I do if the interior light does not work?

Check if the power cord is plugged in and the circuit breaker hasn't tripped. The bulb may be loose or burned out. Replace with a new bulb of the same type.

How much fresh food can I freeze at once?

The maximum quantity is indicated on the rating label inside the appliance. Exceeding this may reduce freezing quality.

Where can I find the model number and technical specifications?

The rating label with basic information (including model R1411F, climate class, electrical data) is attached inside the refrigerator compartment. If not in your language, replace with the supplied label.

USER MANUAL R1411F UPO

Instructions for use

Simple line drawing of a 3D rectangular cabinet or enclosure with a handle (no text or symbols)

Close-up of a metallic mechanical component with mounting bolts (no text or symbols visible)

Simple line drawing of a square box with a flat top (no text or symbols)

3D diagram of a rectangular box with a curved lid and internal structure, labeled '3.a.' (no text or symbols on the diagram itself)

Simple line drawing of a rectangular frame with a grid top and bottom edge, no text or symbols present.

Simple diagram of a rectangular frame with an arrow indicating rotation or indentation, no text or symbols present.

Diagram of a mechanical component with curved surfaces and an arrow indicating direction (no text or symbols)

3D diagram of a mechanical component with labeled point A, showing internal structure and no readable text or symbols.

Simple line drawing of a lens with an eye and lens, no text or symbols present

Pure diagram of a mechanical component with no text, numbers, or symbols

Simple line drawing of a stylized object with a pointed tip and rectangular body, emitting a light beam (no text or symbols)

graph TD
    A["Raw Materials"] --> B["Processed Food"]
    B --> C["Processed Food"]
    C --> D["Processed Food"]
    D --> E["Processed Food"]
    E --> F["Processed Food"]
    F --> G["Processed Food"]
    G --> H["Processed Food"]
    H --> I["Processed Food"]
    I --> J["Processed Food"]
    J --> K["Processed Food"]
    K --> L["Processed Food"]
    L --> M["Processed Food"]
    M --> N["Processed Food"]
    N --> O["Processed Food"]
    O --> P["Processed Food"]
    P --> Q["Processed Food"]
    Q --> R["Processed Food"]
    R --> S["Processed Food"]
    S --> T["Processed Food"]
    T --> U["Processed Food"]
    U --> V["Processed Food"]
    V --> W["Processed Food"]
    W --> X["Processed Food"]
    X --> Y["Processed Food"]

Interior view of a refrigerator with shelves and a black arrow pointing to a small object on the shelf (no text or symbols visible)

Close-up of a metallic architectural element with bolted base and corner detail (no text or symbols visible)

Ansluta apparaten

3D rendering of a simple rectangular box with a flat top (no text or symbols)

3D diagram of a rectangular box with a curved arrow labeled '3.a.' indicating a section or feature (no text or symbols on the object itself)

Simple line drawing of a rectangular frame with a grid top and bottom, no text or symbols present.

Simple diagram of a rectangular frame with an arrow indicating rotation or indentation, no text or symbols present.

Diagram of a mechanical component with curved surfaces and an arrow indicating motion (no text or symbols)

3D diagram of a mechanical component with labeled point A, showing internal structure and no readable text or symbols.

Simple line drawing of a 3D object with an arrow pointing to it, no text or symbols present.

Diagram of a mechanical component with a pointed tip and internal structure (no text or symbols)

Simple line drawing of a mechanical component with no text or symbols

graph TD
    A["Raw Materials"] --> B["Processed Foods"]
    B --> C["Raw Food"]
    C --> D["Processed Dairy"]
    D --> E["Processed Grains"]
    E --> F["Processed Corn Stover"]
    F --> G["Processed Beans"]
    G --> H["Processed Peas"]
    H --> I["Processed Rice Stover"]
    I --> J["Processed Beans"]

Interior view of a refrigerator with shelves and a black arrow pointing to one shelf (no text or symbols)

Close-up of a metallic mechanical component with mounting bolts (no text or symbols visible)

3D diagram of a mechanical component with labeled point A, showing internal structure and no readable text or symbols.

Simple line drawing of a lens with an eye and pointed tip, no text or symbols present

Pure diagram of a mechanical component with no text, numbers, or symbols

Simple line drawing of a mechanical component with no text or symbols

graph TD
    A["Raw Materials"] --> B["Processed Food"]
    B --> C["Processed Food"]
    C --> D["Processed Food"]
    D --> E["Processed Food"]
    E --> F["Processed Food"]
    F --> G["Processed Food"]
    G --> H["Processed Food"]
    H --> I["Processed Food"]
    I --> J["Processed Food"]
    J --> K["Processed Food"]
    K --> L["Processed Food"]
    L --> M["Processed Food"]
    M --> N["Processed Food"]
    N --> O["Processed Food"]
    O --> P["Processed Food"]
    P --> Q["Processed Food"]
    Q --> R["Processed Food"]
    R --> S["Processed Food"]
    S --> T["Processed Food"]
    T --> U["Processed Food"]
    U --> V["Processed Food"]
    V --> W["Processed Food"]
    W --> X["Processed Food"]
    X --> Y["Processed Food"]

Interior view of a refrigerator with shelves and a black arrow pointing to a component (no text or symbols visible)

Close-up of a metallic mechanical component with bolts and a curved base (no text or symbols visible)

3D rendering of a simple rectangular box with a square top (no text or symbols)

3D diagram of a mechanical component with a labeled section '3.a.' (no text or symbols on the diagram itself)

Simple line drawing of a rectangular frame with a grid top and bottom edge, no text or symbols present.

Simple diagram of a rectangular frame with a curved base and label '3.b.' (no text or symbols on the frame itself)

Diagram of a mechanical component with curved arrows indicating motion or force direction (no text or symbols)

3D diagram of a mechanical component with labeled point A, showing internal structure and no readable text or symbols.

Simple line drawing of a lens with an eye and lens, no text or symbols present

Pure diagram of a mechanical component with no text, numbers, or symbols

Simple line drawing of a mechanical component with no text or symbols

Interior view of a refrigerator with shelves and a black arrow pointing to a drop in the lower shelf (no text or symbols)

We thank you for the confidence you have shown by purchasing our appliance.

We wish you a lot of pleasure using the appliance.

The appliance is intended solely for household use.

The refrigerator-freezer is intended for use in households.

The lower part is the refrigerator compartment intended for storing fresh food at temperatures above 0^irc C.

The upper part is the freezer compartment intended for freezing fresh food and long-term storage of frozen food (up to one year, depending on the type of food). This compartment is labeled with four stars / asterisks.

Important warnings....67

A few tips on how to save power with your

refrigerator-freezer combo 68

Appliance description 69

Installation and connection....70

Changing the door opening direction....71

Operating the appliance ....72

Recommended food arrangement

in the appliance 74

Storing food in the refrigerator 75

Freezing fresh food and storing frozen food ..... 76

Defrosting the appliance ....78

Cleaning the appliance 79

Troubleshooting 80

Information on appliance noise 81

Important warnings

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or metal capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
• Before connecting the appliance, carefully read the instructions for use which describe the appliance and its correct and safe use. The instructions apply to several types / models; therefore, they may include descriptions of settings and equipment that may not be available in your appliance.
• Before connecting to the power mains, the appliance should be left to stand still in upright position for at least 2 hours. Thus, operation errors due to the effect of transport on the cooling system will be much less likely to occur.
• The appliance must be connected to the power mains and grounded in compliance with the effective standards and regulations.
• The appliance may not be used outdoors and should not be exposed to rain.
• The appliance must be disconnected from the power mains (unplug the power cord from the wall outlet) before cleaning or before replacing the bulb.
• If the power cord is damaged, it should be replaced by a service technician or other authorized person.
• If the appliance is not used for a longer period of time, switch it off with the relevant button and disconnect it from the power mains. Empty the appliance, defrost it, clean it, and leave the door ajar.
• To protect the environment, dispose of the appliance after its useful life by taking it to an authorized waste collection center.
• The packaging is made of environment-friendly materials that can be recycled, disposed of, or destroyed without hazard to the environment.
  • Children should not play with the appliance.
• The label with basic information on the appliance is attached in the appliance interior. If the label is not in your local language, replace it with the one supplied with the appliance.
• WARNING! Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• WARNING! Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• WARNING! Do not damage the refrigerant circuit.
• WARNING! Do not use electric appliances in the refrigerator or freezer interior, except for those expressly allowed by the refrigerator-freezer manufacturer.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household wasteposal service or the shop where you purchased the product.

A few tips on how to save power with your refrigerator-freezer combo

• Observe the installation instructions.
• Do not open the appliance door more frequently than necessary.
• Occasionally check whether air can circulate freely behind the appliance.
• Condenser unit mounted on the appliance back wall must be kept clean at all times (see section "Cleaning the appliance").
• If the seal is damaged or loose, replace it as soon as possible.
• Store your food in closed containers or other appropriate packaging.
• Before placing the food in the refrigerator, let it cool down to room temperature.
• Defrost your frozen food in the refrigerator compartment.
• Remove the freezer drawers and door as described in the instructions, in order to make use of the entire capacity.
• Defrost your conventional freezer when a frost layer approximately 3-5 millimetres thick has accumulated on the surfaces in the freezer compartment.
• Make sure the shelves are evenly distributed and that the food is arranged in a way that allows free circulation of air (heed the recommended food arrangement as described in the instructions).
• In appliances fitted with a fan, do not block the fan slots.

Appliance description

1 Freezer compartment
2 Control unit
3 Shelf (height adjustable)
4 Fruit and vegetables bin
5 Refrigerator door rack (deep and shallow version, with or without cover)
6 Foot

Installation and connection

Selecting the room

- The appliance should be installed in a dry and well ventilated room. The appliance will operate correctly if the environment temperature is within the ranges listed in the table below. The appliance class is indicated on the label with the basic information on the appliance.

Class Ambient temperature
SN (subnormal) from	+10°C to +32°C
N (normal) from +16°C	C do +32°C
ST (subtropical) from	+16°C do +38°C
T (tropical) from +16°C	C do +43°C

Installing the appliance

Close-up of a metallic mechanical component with bolts and a curved edge (no text or symbols visible)

Appliance installation should be carried out by at least two persons to avoid any physical injury or damage to the appliance.

• The appliance should stand firmly in an upright position on a sufficiently solid base. At the front, the appliance is fitted with two adjustable legs that can be used to level the appliance.
  Rear side of the appliance is fitted with wheels (certain models only) facilitating the positioning of the appliance at the preselected place.
• If there is a kitchen furniture element above the appliance, there should be a clearance of at least 5 centimeters between this element and the refrigerator, to ensure sufficient cooling of the condenser unit.
• Do not expose the appliance to direct sunlight and do not place it near sources of heat. If this cannot be avoided, install an insulation panel.
• The appliance may stand freely or it can be placed next to a kitchen furniture element or a wall. Mind the space required to open the door and pull out the drawers and shelves (see installation diagram).

Changing the door opening direction

Tools required: socket wrench / spanner Nr. 8, slot and cross screwdriver

1. Disassemble the screws behind the fixed roof with cross-slot screwdriver and remove the cover from the refrigerator.
2. Remove the screws fixed the top-hinge (A) with cross-slot screwdriver.
3. Replace the top-hinge and the door limit block and the door bearing bush to the other side a) replace the top-hinge.
   b) replace the door bearing bush and the limit block.
4. Disassemble the screws fi xed the bottom-hinge (B) with cross-slot screwdriver and replace the hinge to the other side then fi x it with screws
   Note: the refrigerator incline angle less 45^irc .
5. Replace the leveler to the other side and adjust it to make sure the cabinet level.
6. Set the door right position, fi x the top-hinge and then the roof cover.

3D rendering of a simple rectangular box with a flat top (no text or symbols)

3D diagram of a mechanical assembly with a labeled section '3.a.' (no text or symbols on the diagram itself)

Diagram of a mechanical assembly with labeled component B, no readable text or symbols present

Simple line drawing of a rectangular frame with a top header and bottom base, no text or symbols present.

Simple diagram of a rectangular panel with an arrow indicating rotation or movement, labeled '3.b.' (no text or symbols on the panel itself)

Diagram of a mechanical component with curved arrows indicating motion or force direction (no text or symbols)

Ensure the Appliance is unplugged and empty.

Adjust the two leveling feet to their highest position.

We recommend you have someone to assist you.

NOTE: To take the door off it is necessary to tilt the Appliance backward.

You should rest the Appliance on something solid e.g.a chair just below the top panel.

Do not lay the Appliance completely fl at as this may damage the coolant system.

Operating the appliance

3D diagram of a mechanical component with labeled point A, showing internal structure and no readable text or symbols.

A Temperature setting and on/off knob

Switching the appliance on/off

Simple line drawing of a lens with an eye and lens, no text or symbols present

To switch on: rotate the A dial clockwise.

Switching off: Rotate the A knob back to the position in which the arrow is aligned with the symbol ● (caution: appliance will remain powered, i.e. there will still be electric current in the appliance).

Adjusting the temperature

Diagram of a mechanical component with a pointed tip and internal structure (no text or symbols)

- To set the desired temperature, rotate the A dial in clockwise direction, i.e. to the right.

- A change in the environment temperature will affect the temperature in the appliance. Adjust the setting with the A dial accordingly. Positions towards the thicker part of the sign mean a lower temperature in the appliance (cooler). Settings towards the thinner part of the sign mean a higher temperature (warmer).

- If the temperature of the room where the appliance is installed is below 16^ircC , we recommend setting the A dial temperature to the thickest part of the sign.

Simple line drawing of a mechanical component with no text or symbols

Recommended food arrangement in the appliance

Recommended food arrangement in the appliance

Refrigerator compartment areas:

• upper area: canned / preserved food, bread, wine, pastry, etc.
• medium area: dairy products, ready-to-eat meals, deserts, juices, beer, cooked food, etc.
• lower area: meat, meat produce, delicatessen, etc.
• vegetable drawer / bin: fresh fruit, vegetables, salads, root vegetables, potatoes, onions, garlic, tomatoes, tropical fruit, sauerkraut, turnips, etc.

Refrigerator door areas:

• upper / medium part: eggs, butter, cheeses, etc.
• lower part: beverages, cans, bottles, etc.

Freezer compartments:

- freezing, storage of frozen food (see section Freezing and storage of frozen food).

graph TD
    A["Raw Materials"] --> B["Processed Food"]
    B --> C["Raw Food"]
    C --> D["Processed Food"]
    D --> E["Processed Food"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

Storing food in the refrigerator

Important warnings on food storage

⚠️ Appropriate use of the appliance, appropriate food packaging, maintaining the appropriate temperature and observing the hygienic guidelines will affect decisively the quality of food storage.
⚠️ Observe the best before dates indicated on the product packaging.
Food stored in the refrigerator should be placed in closed containers or otherwise suitably packed to prevent emitting scent and moisture.
Do not store infl ammable, volatile, and explosive substances in the refrigerator.
⚠️ Bottles with high alcohol content should be tightly sealed and stored in an upright position.
Some organic solutions, essential oils in lemon and orange peel, butter acid, etc. may damage the plastic surfaces in case of a prolonged contact, causing premature ageing of these materials.
⚠️ Unpleasant smell warns of poor appliance cleanliness or deteriorated food (see Cleaning and Maintenance).
⚠️ Remove perishables from the refrigerator before a longer period of absence from home.

Refrigerator interior equipment

The equipment depends on the models.

• The shelves can be inserted to any of the shelf guides in the refrigerator interior. Food that perishes quickly should be kept at the back of the shelf where the temperatures are lower.
• The bin / drawer at the bottom of the refrigerator compartment, under the glass shelf, is intended for storing fruit and vegetables. It provides humidity, thus preventing the food from dehydrating. The food must be appropriately packaged in order to prevent emitting or receiving smell and moisture.
• Interior side of the refrigerator door is fitted with racks and bins intended for storing cheese, butter, eggs, yoghurt, and other smaller packages, tubes, cans, etc. The lower part of the door is fitted with a bottle rack.

Food storage time

Recommended storage time for the refrigerator

Foodsmoked Time
eggs, marinated meat, smoked meat up to cheese up to 10 days	10 days
root vegetables up to 8 days
butter up to 7 days
deserts, fruit, ready-to-eat dishes, raw meat chunks	up to 2 days
fi sh, raw chopped meat, seafood up to 1 day

Freezing fresh food and storing frozen food

Freezing procedure

Maximum quantity of fresh food that can be introduced into the appliance at a time is indicated on the label with basic information on the appliance. If this quantity is exceeded, freezing quality will deteriorate, as will the quality of the already frozen food.

- 24 hours before freezing fresh food, rotate the A dial towards the thickest part of the marking;

Fresh food should not be in contact with the packages of already frozen food!

• When freezing minor quantities of food (1-2 kg) the super freeze setting is not required.
• After completing the freezing process, rotate the A knob back to the desired setting.

Important warnings on freezing fresh food

The freezer should only be used for freezing food that is appropriate for freezing. The food should always be fresh and of adequate quality.

Choose an appropriate packaging for the food and package it correctly.

The packaging should be airtight and watertight to prevent loss of humidity or vitamins from the food.

⚠️ Indicate the type of food, quantity, and freezing date on each food package.

It is important that the food is frozen as quickly as possible; therefore, smaller packages should be preferred. Before freezing, the food should be cooled.

• When storing or using frozen food, observe the manufacturer's instructions. Temperature and best before date are indicated on the packaging.
• Only choose food with undamaged packaging, stored in freezers at temperatures of -18^ircC or lower.
• Do not buy a food package covered with frost, as this is a sign that the food has been slightly thawed several times. Such food is of lesser quality.
• When transporting frozen food, prevent it from defrosting / thawing. Higher temperature will result in shorter storage time and deteriorated food quality.

Storing pre-frozen food

Storage times for frozen food

Recommended time for storage in the freezer

Food Time
fruit, beef from 10 to 12 months
vegetables, veal, poultry from 8 to 10 months
venison from 6 to 8 months
pork from 4 to 6 months
chopped, dice, or ground meat 4 months
bread, pastry, ready-to-eat meals, lean fish	3 months
tripes / innards 2 months
smoked sausage, fatty fi sh 1 month

Defrosting frozen food

Microorganisms are not destroyed by freezing. After defrosting, their activity is resumed intensively and the food may perish quickly. Therefore, use the thawed food as quickly as possible. Partial thawing decreases the nutritive value of the food, particularly fruit, vegetables, and ready-to-eat food.

Defrosting the appliance

Automatic refrigerator defrosting

The refrigerator does not require defrosting, as ice accumulated on the back wall of the refrigerator compartment interior is melted automatically.

The accumulated ice is thawed when the compressor is not operating. The drops will drip through the opening in the refrigerator back wall into a container above the compressor, from where they will evaporate.

If an excessive layer of ice is accumulated on the refrigerator back wall (3-5 mm), the appliance should be disconnected and defrosted manually.

Defrosting a conventional freezer

• The freezer should be defrosted when approximately 3-5 mm of frost is accumulated.
• 24 hours before defrosting, rrotate the A dial towards the thickest part of the marking;

After 24 hours, remove the frozen food from the freezer and protect them from thawing.

• Disconnect the appliance – rotate the thermostat knob A to the position and unplug the power cord from the wall outlet.
• Leave the door open until the frost or ice can be easily removed from the surfaces using e.g. a plastic scraper. Be careful not to damage the freezer interior surfaces. Remove the frost or ice from the freezer using a cloth, before it melts.
• Do not use electrical appliances to defrost the appliance (hairdryer etc.);
• When defrosting the refrigerator, do not use any defrosting sprays as these may damage the plastic surfaces or harm your health.
• Clean the appliance interior and wipe it dry (see cleaning the appliance).
• Before putting the food back into the freezer, connect the appliance to the power mains and rotate the A knob back to the desired setting.

Cleaning the appliance

Interior view of a refrigerator with shelves and a black arrow pointing to a small object on the shelf (no text or symbols visible)

Before cleaning, disconnect the appliance from the power mains - rotate the thermostat knob A to the STOP (0) position and unplug the power cord from the wall outlet.

- Use a soft cloth to clean all surfaces. Cleaners containing abrasive particles, acids, or solvents, are not appropriate as they will damage the surface.

Clean the appliance exterior with water or a mild solution of suds.

Lacquer-coated and aluminum surfaces can be cleaned with lukewarm water to which some mild detergent was added.

Cleaning agents with minor alcohol content are also acceptable (e.g. window cleaners).

Cleaners with alcohol content are not allowed for cleaning plastic parts.

Clean the appliance interior with lukewarm water to which you may add some vinegar.

• Placed under the cooling board that cools the refrigerator interior are a trough (groove) and an opening through which melted water is discharged from the appliance interior. The through and the opening should never be blocked; therefore, check them often and clean as required (e.g. using a plastic straw).
• Frost and ice accumulated in a layer of 3-5 mm will cause an increase in power consumption; therefore it should be removed regularly. Do not use any sharp objects, solvents, or sprays.
  • After cleaning, switch on the appliance and put the food back in.

Troubleshooting

Problem: Cause or remedy:
Your Refrigerator will not operate:	The power supply cord is unplugged.
	The thermostat knob is set to OFF position.
The light so not work: • The power	supply cord is unplugged.
	A household fuse or circuit breaker has tripped.
	A light bulb is loose in the socket.
	A light bulb has burned out.
Food in the refrigerator compartment freezing:	The thermostat knob is set too cold.
	The position of food stored touches the refrigerant power of refrigerator back wall.
Food in the refrigerator compartment is not cold:	The air vents are blocked in the compartment. This prevents the movement of cold air.
	The door(s) are opened too often of not close properly.
	A large amount of food has just been added to the refrigerator or refrigerator compartment.
	The position of thermostat knob is adjusted too low.
Melted frost Leak over compartment inside or on floor:	The drain – off mouth entrance is blocked.
	Evaporator pan is in place.
The refrigerator seems to make unusual noise:	The refrigerator is leveled on the floor.
	The body of the refrigerator touches the wall.
	The drip tray is not placed properly.
There is interior moisture build-up:	The air vents are blocked in the refrigerator.
	The door is opened often.
	The room is humid.
	The food is not packaged correctly.
	The control is not set correctly of the surrounding conditions.
The doors will not close completely:	The shelves are out of position.
	The gaskets are dirty.
	The fridge is not level.

If the above methods are not yet effective, please contact with the maintenance service department for help without any delay.

Information on appliance noise

Cooling in the refrigerators-freezers is enabled by a cooling system with a compressor (with some appliances also a fan), which emits a certain level of noise during operation. The level of noise depends on installation, proper use, and appliance age.

• After appliance startup, the compressor may be somewhat louder (fluid noise, noise caused by refrigerant flowing through the system). This is not a sign of malfunction and it will not affect the appliance useful life. Eventually, the level of this noise will be reduced.
• Occasionally, sudden or louder noise may appear during appliance operation, which will appear uncommon; these are mostly the result of improper installation:

- The appliance must be placed horizontally and firmly on a solid base.

- The appliance should not be in contact with the wall or adjacent elements.

- Make sure the appliance interior equipment is appropriately fitted and that the noise is not caused by vibrating cans, bottles, or other containers in contact with each other.

WE RESERVE THE RIGHT TO CHANGES THAT TO NOT AFFECT THE APPLIANCE FUNCTIONALITY.

UPO

Gorenje Group Nordic A/S

Røskildevej 290

DE-2610, Rodovre,

DENMARK

[e-mail]