OnCell G3110-HSPA - Uncategorized Moxa - Free user manual and instructions
Find the device manual for free OnCell G3110-HSPA Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Cellular Gateway |
| Dimensions | 100 x 80 x 30 mm |
| Weight | 250 g |
| Power Supply | 12-48 VDC |
| Wireless Interface | HSPA/UMTS (3G) with fallback to EDGE/GPRS |
| Ethernet Ports | 2 x 10/100BaseT(X) |
| Serial Ports | 1 x RS-232 (DB9) and 1 x RS-485 (terminal block) |
| Operating Temperature | -20°C to 60°C |
| Mounting | DIN-rail or wall mounting |
| LED Indicators | Power, Signal Strength, Data Activity, Alarm |
| VPN Support | IPsec, OpenVPN, PPTP, L2TP |
| Firewall | Stateful packet inspection, NAT, port forwarding |
| Protocols | TCP/IP, UDP, HTTP, HTTPS, SNMP, Modbus TCP |
| Management | Web GUI, CLI, SNMP v1/v2c/v3 |
| SIM Slot | 1 x Mini-SIM (2FF) |
| Antenna Connector | SMA female (main and diversity) |
| Ingress Protection | IP30 |
| Spare Parts & Repairability | Power supply module, SIM card tray, antenna; user-replaceable with basic tools |
| Maintenance & Cleaning | Wipe with dry cloth; avoid liquids; check antenna connections periodically |
| Safety Information | Use only supplied power adapter; avoid exposure to moisture; disconnect power before servicing |
Frequently Asked Questions - OnCell G3110-HSPA Moxa
What is the Moxa OnCell G3110-HSPA used for?
The Moxa OnCell G3110-HSPA is an industrial cellular gateway that provides wireless connectivity via HSPA (3G) networks. It is typically used for remote monitoring, data acquisition, and connecting industrial equipment to the internet over cellular networks.
How do I configure the device for my network?
You can configure the OnCell G3110-HSPA through its web GUI by connecting to its default IP address (192.168.127.254) via an Ethernet cable. Default username and password are 'admin'. Set the APN, authentication, and other cellular parameters under 'Cellular Settings'.
What should I do if the device does not connect to the cellular network?
Check the SIM card is inserted correctly and activated. Verify the APN settings with your carrier. Ensure the antenna is connected properly and the signal strength indicator shows a valid level. Also, check that the device is within coverage area.
Can I use the device with any 3G SIM card?
Yes, the device supports standard Mini-SIM (2FF) cards. It is compatible with HSPA/UMTS networks on frequencies 850/900/1900/2100 MHz. Ensure your carrier provides a data plan and the card is not locked.
How do I reset the device to factory defaults?
Press and hold the reset button located on the panel for at least 5 seconds until the Alarm LED blinks rapidly. Release the button; the device will reboot with factory settings.
What is the maximum power consumption?
The typical power consumption is around 3W (12V/250mA) under normal operation. Maximum may reach 5W during transmission. Use a power supply rated for at least 12V/1A.
How do I mount the device on a DIN rail?
Attach the DIN-rail clip (supplied) to the back of the device. Align the clip with the rail and push down until it snaps into place. For wall mounting, use the provided brackets and screws.
Can I use multiple serial devices with one gateway?
The OnCell G3110-HSPA has one RS-232 and one RS-485 port. For more devices, use an external serial switch or connect devices in daisy-chain on RS-485 (up to 32 nodes).
How do I update the firmware?
Download the firmware file from Moxa's support site. Log into the web GUI, go to 'System' -> 'Firmware Upgrade', select the file, and click 'Upgrade'. Do not power off during the process.
What safety precautions should I take when installing?
Ensure the power is disconnected before wiring. Use only the recommended power adapter. Avoid installing in wet or explosive environments. Follow local electrical codes and use proper grounding.
User questions about OnCell G3110-HSPA Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual OnCell G3110-HSPA - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. OnCell G3110-HSPA by Moxa.