M-4201 - Uncategorized Moxa - Free user manual and instructions
Find the device manual for free M-4201 Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial serial device server |
| Dimensions | 200 x 150 x 40 mm |
| Weight | 800 g |
| Power Supply | 12 to 48 VDC |
| Number of Serial Ports | 4 RS-232/422/485 ports |
| Ethernet Interface | 1 x 10/100 Mbps RJ45 |
| Operating Temperature | -10 to 60 °C |
| Data Rate | Up to 921.6 kbps |
| Protocols Supported | TCP, UDP, Telnet, SSH |
| Configuration | Web-based or utility software |
| Mounting | DIN-rail or wall mount |
| Protection | ESD and surge protection |
| LED Indicators | Power, Ready, Tx/Rx per port |
| Maintenance | Clean with dry cloth; avoid liquids |
| Safety | Use only certified power supply |
| Spare Parts | Contact Moxa for replacements |
| Reparability | Refer to Moxa service center |
| General Information | Designed for industrial automation |
Frequently Asked Questions - M-4201 Moxa
How do I configure the M-4201 for the first time?
Connect the device to your network and power it on. Use the Moxa Configuration Utility or access the web interface via its default IP (192.168.127.254). Follow the quick start guide in the manual to set serial parameters.
What type of serial ports does the M-4201 support?
The M-4201 provides 4 RS-232/422/485 software-selectable serial ports, allowing flexibility for different serial devices.
Can I mount the device on a DIN rail?
Yes, the M-4201 comes with a DIN-rail kit. Alternatively, you can use the wall-mount brackets for secure installation.
What power supply do I need?
The device accepts 12 to 48 VDC input. Use a regulated power supply capable of providing at least 500 mA.
How do I reset the M-4201 to factory defaults?
Press and hold the reset button (located near the power connector) for 5 seconds while the device is powered on. The device will reboot with default settings.
What is the maximum baud rate supported?
The serial ports support baud rates up to 921.6 kbps.
Is the M-4201 compatible with third-party software?
Yes, it supports standard TCP/UDP sockets and can be used with Virtual COM drivers for seamless integration with existing applications.
How do I check the firmware version?
Log in to the web interface and navigate to System Information under Administration. The firmware version is displayed there.
What should I do if the device is not connecting to the network?
Verify the Ethernet cable and LED status. Ensure the device IP is in the same subnet as your computer. Try a factory reset if necessary.
Can I use the M-4201 in extreme temperatures?
The device operates from -10 to 60 °C. For outdoor or harsh environments, use a protective enclosure.
User questions about M-4201 Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual M-4201 - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M-4201 by Moxa.