120/12 - Pressure washer RENO - Free user manual and instructions
Find the device manual for free 120/12 RENO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type | High Pressure Cleaner |
| Brand | RENO |
| Model | 120/12 |
| Max Pressure | 120 bar (1740 psi) |
| Max Flow Rate | 12 L/min |
| Power Supply | 230 V / 50 Hz |
| Motor Power | 1800 W |
| Weight | 15 kg |
| Dimensions (H x W x D) | 800 x 400 x 300 mm |
| High Pressure Hose Length | 10 m |
| Spray Gun | Included with trigger lock |
| Nozzle Type | Adjustable fan jet / rotary |
| Detergent Tank | Integrated, 1 L capacity |
| Max Inlet Pressure | 10 bar |
| Safety Features | Thermal cut-out, pressure relief valve |
| Maintenance | Clean water filter regularly; check hoses for leaks |
| Spare Parts Availability | Via RENO authorized service centers |
| Repairability | Modular design; most parts replaceable |
| Information | Refer to user manual for full instructions |
Frequently Asked Questions - 120/12 RENO
How do I start the pressure washer?
Ensure water supply is connected and switched on. Plug the machine into a power outlet, then press the on/off switch. Unlock the trigger lock on the spray gun and pull the trigger to start.
What type of detergent can I use?
Use only detergents specifically designed for pressure washers. Avoid harsh chemicals or bleach as they may damage the pump. Refer to the manual for recommended detergents.
Why is the pressure low?
Check if the water supply is fully open and the inlet filter is clean. Also inspect the high pressure hose for kinks or leaks. The nozzle may be clogged; clean it with the pin provided.
Can I use bleach or solvents?
No. Bleach, solvents, or flammable liquids will damage the seals and pump. Only use water or approved pressure washer detergents.
How do I store the pressure washer after use?
Disconnect water and electricity. Press the trigger to release residual pressure. Drain the hose and pump. Store in a frost-free location. If freezing is a risk, use antifreeze specially made for pressure washers.
What does the thermal cut-out do?
The thermal cut-out automatically shuts off the motor if the pump overheats. Let the machine cool for 10-15 minutes; it will restart automatically once it has cooled.
How often should I clean the inlet filter?
Clean the water inlet filter every 10 hours of use or if you notice a drop in pressure. Rinse it under running water and remove any debris.
Can I use an extension cord?
Yes, but only if it is an outdoor rated cord with sufficient gauge (at least 1.5 mm²) and rated for the power consumption. Keep the cord connection dry and off the ground.
Where can I buy spare parts?
Spare parts are available through RENO authorized service centers. You can find a list on the RENO website or contact customer support.
What is the maximum water supply temperature?
The maximum incoming water temperature is 40°C. Using hotter water can damage the pump seals.
User questions about 120/12 RENO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure washer in PDF format for free! Find your manual 120/12 - RENO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 120/12 by RENO.