646-089 - Knife sharpener Melissa - Free user manual and instructions

Product Type	Electric knife sharpener
Brand	Melissa
Model	646-089
Power Supply	230 V ~ 50 Hz
Compatible Knife Materials	Alloy steel, carbon steel, stainless steel
Not Compatible With	Scissors, bread knives, electric knives with bevelled indentations, double-sided indentations
Sharpening Stages	2 stages: precision (left guides) and fine (right guides)
Sharpening Method	Draw knife backwards through guides; never push forward
Safety Features	Non-slip suction cups, on/off switch, double insulation
Cleaning	Wipe with damp cloth; empty metal shavings collector regularly
Protection Class	Class II
Plug Type (UK)	BS 1363 3-amp plug
Intended Use	Domestic use only
Repair	Authorised repairer only; unauthorised repairs void guarantee
Disposal	Do not dispose with household waste; follow WEEE directive

Frequently Asked Questions - 646-089 Melissa

How do I sharpen a knife?

Start with stage 1 (precision sharpening) using the left-side guides: draw the knife slowly backwards through one guide then the other, repeating three times. Then stage 2 (fine sharpening) with right-side guides, also three times. Finish with one quick draw through each right-side guide. Always draw the knife towards you, never push it forward.

Can I sharpen scissors with this sharpener?

No, the appliance is designed for knives only. It must not be used to sharpen scissors, bread knives, electric knives with bevelled indentations, or knives with double-sided bevelled indentations.

How do I clean the knife sharpener?

Unplug and let cool. Wipe the exterior with a damp cloth; use mild detergent if needed. Do not immerse in water. Regularly empty the metal shavings collector by removing the black covers over the whetstones, turning the appliance over a bin, and shaking.

Why do I see sparks when sharpening?

High carbon steel knives may generate sparks when drawn through the sharpener. This is normal and not dangerous.

Can I apply lubricant to the sharpener?

No, do not apply any kind of lubricant to the appliance.

What should I do if the whetstones lock?

Do not press down hard on the knife; pull it through at a steady pace. If locked, turn off and unplug, then gently free the stones. Excessive force can cause locking.

How do I sharpen a knife with single-sided indentations?

Use only the right-side guides (stage 2) and sharpen only the smooth side of the blade. Draw the knife very lightly. Note that indentations will gradually wear away.

The sharpener vibrates – is this normal?

Yes, the whetstones can vibrate as they rotate. This is normal and does not affect performance.

How do I replace the fuse (UK model)?

Use a BS1362 fuse rated at 3 amps, ASTA or BSI approved. Open the plug, replace the fuse, and refit the fuse cover. If the cover is lost or damaged, do not use the plug.

What knives are not suitable for this sharpener?

The appliance must not be used on scissors, bread knives, electric knives with bevelled indentations, or knives with double-sided bevelled indentations. Also avoid knives that do not easily fit into the guides.

USER MANUAL 646-089 Melissa

Exterior view of a modern massage device with black and silver buttons (no visible text or symbols)

DK Knivsliber.... 2

SE Knivslip.... 5

NO Knivsliper.... 8

FI Veitsenteroitin.... 11

UK Knife sharpener.... 14

OVERSIGT OVER APPARATETS DELE

OFTE STILTE SP∅RSMÅL

Hvis du har spørsmål om bruk av apparatet som du ikke finner svar på i denne bruksanvisningen, kan du ta en titt på nettsidene våre på www.adexi.eu.

To get the best out of your new appliance, please read this user guide carefully before using it for the first time. Take particular note of the safety precautions. We also recommend that you keep the instructions for future reference, so that you can remind yourself of the functions of your appliance.

SAFETY MEASURES

General

• Incorrect use of this appliance may cause personal injury and damage.
• Use for its intended purpose only. The manufacturer is not responsible for any injury or damage resulting from incorrect use or handling (see also Guarantee Terms).

- For domestic use only. Not for outdoor or commercial use.

• For connection to 230 V, 50 Hz only.

- Do not immerse the appliance, cord or plug in water and make sure no water enters the appliance.

- Never touch the appliance, cord or plug with wet or damp hands.

- Do not expose to direct sunlight, high temperatures, humidity, dust or corrosive substances.

- Never leave the appliance unattended when it is switched on.

- Keep the appliance under constant supervision while in use. Keep an eye on children.

- Use only accessories supplied with the appliance or those recommended by the manufacturer.

- Keep the appliance under constant supervision while in use. Keep an eye on children in the vicinity of the appliance when it is being used. The appliance is not a toy.

- The appliance is not to be used by persons with reduced sensitivity, physical or mental disabilities or persons who are unable to use the appliance, unless supervised or instructed by a person responsible for their safety.

Use

• Always place the appliance on a level, dry, and stable surface.
• Do not touch the moving parts.
- The appliance is designed to sharpen alloy steel, carbon steel or stainless steel knives. It can be used to sharpen kitchen and sport knives.

• The appliance must not be used to sharpen scissors, bread knives, electric knives with bevelled indentations or knives with double-sided bevelled indentations.
• The appliance can sharpen knives with single-sided bevelled indentations. Those types of knife must only be sharpened in the right-side guides of the appliance, and only sharpen the smooth side of the blade.
• Never try to sharpen a knife that cannot easily fit into the guide.
• Never put the knife point first into the sharpener and push it forward. You must always draw the knife back through the sharpener towards yourself.
• Keep the knife edge parallel with the table, unless sharpening the point.
• Do not press down hard on the knife as you pull it through the appliance because this can cause the whetstones to lock.
• Be very careful when handling knives. Never run your finger along the blade to see if it is sharp.
• You may have to sharpen a particular knife several times in the sharpener to achieve the required sharpness.
• You must always wipe the blade with a wet cloth to remove any metal shavings when you have finished sharpening the knife.
• High carbon steel knives may generate sparks when drawn through the sharpener. This is normal and not dangerous.
• The whetstones can vibrate as they rotate. This is normal.
• Do not apply any kind of lubricant to the appliance.

Cord and plug

• Do not let the cord hang out over the edge of the work surface.
• Check that it is not possible to pull or trip over the cord or any extension cord.
• Keep the cord and appliance away from heat sources, hot objects and naked flames.
• Ensure the cord cannot come into contact with the knife when sharpening.
• Remove the plug from the socket when cleaning, or when not in use. Avoid pulling the cord when removing the plug from the socket. Instead, hold the plug.
  • Ensure that the cord is fully extended.

• The cord must not be twisted or wound around the appliance.

• Check regularly that neither cord nor plug is damaged and do not use if they are, or if the appliance has been dropped or damaged in any other way.

• If the appliance, cord or plug has been damaged, have the appliance inspected and if necessary repaired by an authorised repairer. Never try to repair the appliance yourself. Please contact the store where you bought the appliance for repairs under the guarantee. Unauthorised repairs or modifications to the appliance will invalidate the guarantee.

KEY TO THE MAIN COMPONENTS OF THE APPLIANCE

1. Left-side guides for precision sharpening (stage 1)
2. Right-side guides for fine sharpening (stage 2)
3. Cover plate
4. On/Off button

USING THE APPLIANCE

The appliance has two sets of knife guides: The left guide (1) is for precision sharpening, and the right guide (2) is for fine sharpening. The guides are precisely angled for optimal sharpening. Left -side and right-side guides sharpen both sides of the knife blade.

Unless otherwise stated, always start with precision sharpening, followed by fine sharpening.

1. Dampen the suction cups under the appliance with a little water. Place the appliance on a flat, stable surface, e.g. kitchen counter and ensure the appliance is firmly in place.
2. Plug in and switch on the power.
3. Switch on the appliance by switching the on/off button (4) to "I".

4. Stage 1 – precision sharpening: Slowly draw the knife back towards you through one and then the other left-side guide. Repeat the process three times. Do not press down hard on the knife or draw it too fast through the guide. Draw the knife through at a rate of 1 second for every 5 cm of blade.

5. Keep the knife edge parallel with the table, unless sharpening the point.

6. Sharpen the point by slightly raising the knife handle, so that the curved part of the blade is drawn through the guide.

7. Stage 2 – fine sharpening: Slowly draw the knife back towards you through one and then the other right-side guide. Repeat the process three times. Do not press down hard on the knife or draw it too fast through the guide. Take around 3 seconds to draw the knife, depending on the blade length.

8. Finish the fine sharpening by quickly drawing the knife a single time though each right-side guide (approx. 1 second duration).

9. You must always wipe the blade with a wet cloth to remove any metal shavings when you have finished sharpening the knife.

10. Repeat stages 1 and 2 until the knife is sufficiently sharpened.

11. Turn off the appliance by pressing the On/Off button to "0" and remove the plug from the socket.

IMPORTANT! Never put the knife point first into the sharpener and push it forward. You must always draw the knife back through the sharpener towards yourself.

IMPORTANT! The appliance must not be used to sharpen scissors, bread knives, electrical knives with bevelled indentations or knives with bevelled indentations on both sides.

NOTE! You may have to sharpen the knife several times to achieve the required sharpness. It may be the case that the knife was previously sharpened incorrectly or badly, or the knife is made from tempered steel which is extremely hard. Repeat stages 1 and 2 until the knife cuts easily though food. In such cases, it will usually only be necessary to repeatedly sharpen the knife on the very first occasion. Carrying out stages 1 and 2 will be enough thereafter.

Particular care with knives with single-sided bevelled indentations

The appliance can sharpen knives with single-sided bevelled indentations.

• These types of knife must only be sharpened in the right-side guides of the appliance, so as to only sharpen the smooth side of the blade.
• Draw the knife very lightly through the guides.
• Please note, that a small part of the indentations will be worn away every time the knife is sharpened, and eventually, they will be completely worn away.

CLEANING

When cleaning the appliance, you should pay attention to the following points:

• Remove plug from the mains socket, and allow the appliance to cool down before cleaning it.
• Never submerge the appliance in water and make sure no water enters the appliance.
• Clean the appliance by wiping it with a damp cloth. A little detergent can be added if the appliance is heavily soiled.
• Do not use scouring pads, steel wool or any form of strong solvents or abrasive cleaning agents to clean the appliance, as they may damage the outside surfaces of the appliance.
• IMPORTANT! Allow to dry fully after cleaning before using again. Do not use the appliance if damp.
• Do not apply any kind of lubricant to the appliance.

Emptying the metal shavings collector

From time to time it will be necessary to empty the appliance form metal shavings that accumulate in the collector behind the whetstones.

1. Remove the black covers (3) over the whetstones. Loosen the cover in front and back with your fingers and lift it off.
2. Hold the appliance over a dustbin and turn it over and shake carefully to empty the metal shavings.
3. Replace the covers. Set the long stud into the rear recess first. Ensure the studs on each side of the cover are aligned with the appliance top holes and press into place until you hear a click. The covers can only be fitted in one position because of their curved shape.

FOR UNITED KINGDOM ONLY

Plug wiring:

This product is fitted with a BS 1363 3-amp plug. If you have to replace the fuse, only those that are ASTA or BSI approved to BS1362 and with a rated current of 3 amps should be used. If there is a fuse cover fitted, this cover must be refitted after changing the fuse. If the fuse cover is lost or damaged, the plug must not be used. You must also check if the socket outlets in your home fit with the plug of the appliance. If the socket outlet in your home does not fit with the plug, the plug must be removed and disposed of safely as insertion of the plug into the socket is likely to cause electric hazard.

As this product is a class II appliance, the pin of BS plug for earth connection is false.

INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT

Please note that this Adexi product is marked with this symbol:

This means that this product must not be disposed of along with ordinary household waste, as electrical and electronic waste must be disposed of separately.

In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the EU can take used equipment to special recycling stations free of charge. In certain member states, used appliances can be returned to the retailer where they were bought on the condition you buy new products. Contact your retailer, distributor or the municipal authorities for further information on what to do with electrical and electronic waste.

GUARANTEE TERMS

The guarantee does not apply:

• if the above instructions have not been followed
  • if the appliance has been interfered with
• if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage
• if the appliance is faulty due to faults in the electricity supply.

Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.

FREQUENTLY ASKED QUESTIONS

If you have any questions regarding the use of the appliance and cannot find the answer in this user guide, please try our website at www.adexi.eu.

Go to the "Consumer Services" menu and click on "Frequently Asked Questions" to view the most frequently asked questions.

You can also see contact details on our website if you need to contact us for technical questions, repairs, accessories or spare parts.

IMPORTER

Adexi Group

We cannot be held responsible for any printing errors.

DE

EINLEITUNG