640-048 - Vacuum Cleaner Melissa - Free user manual and instructions

Product Type	Stick Vacuum Cleaner
Brand	Melissa
Model	640-048
Dimensions (L x W x H)	110 x 25 x 20 cm
Weight	3.5 kg
Power Supply	220-240V, 50/60Hz
Power Consumption	600 W
Dust Capacity	0.5 L (bagless)
Filtration System	Washable HEPA filter
Cord Length	5 m
Main Functions	Dry vacuuming on hard floors and carpets
Accessories Included	Crevice tool, brush tool
Noise Level	78 dB(A)
Filter Cleaning	Rinse with water and dry completely before reuse
Dust Container Cleaning	Empty after each use, wash with mild soap
Safety Features	Overheat protection, automatic shut-off
Spare Parts Availability	Filters and brushes available online
Repairability Index	7/10
Warranty	2 years

Frequently Asked Questions - 640-048 Melissa

How do I clean the filter?

Remove the filter and rinse it under running water. Let it dry completely (at least 24 hours) before reinstalling. Do not use detergent.

The vacuum loses suction power. What should I do?

Check if the dust container is full, the filter is clogged, or there is a blockage in the hose or nozzle. Clean or replace the filter regularly.

Can I use the vacuum on carpets?

Yes, it works on both hard floors and low-pile carpets. Adjust the brush setting if available.

How often should I empty the dust container?

Empty it after each use or when it reaches the MAX line to maintain optimal performance.

Is it safe to vacuum liquids?

No, this vacuum is designed for dry use only. Using it on liquids can damage the motor and void the warranty.

The brush roll stopped spinning. What now?

Turn off and unplug the vacuum. Check for hair or debris wrapped around the brush roll and remove it. Ensure the belt is intact.

Where can I buy replacement filters?

Replacement filters are available on the Melissa website or at major online retailers. Use the model number 640-048 to find compatible parts.

How do I store the vacuum?

Unplug and wrap the cord. Store in a dry place, preferably with the dust container emptied and filter clean. Use the wall mount if provided.

Why does the vacuum turn off suddenly?

This is likely due to overheating. Let it cool down for 30 minutes. Ensure filters are clean and no blockages exist.

What does the warranty cover?

The warranty covers manufacturing defects for 2 years from purchase date. It does not cover wear and tear, misuse, or damage from improper cleaning.

USER MANUAL 640-048 Melissa

Black and silver vacuum cleaner with coiled hose and handle (no visible text or symbols)

UK Bagless vacuum cleaner....18

DE Beutelloser Staubsauger ....22

PL Odkurzacz bez worka 26

Close-up of a hand pressing down on a small mechanical device with arrows indicating motion (no visible text or symbols)

Close-up of a metallic mechanical component with internal slots and a handle (no visible text or symbols)

Hand holding a black mechanical component with a white label (no visible text or symbols)

Close-up of a mechanical component with a white arrow pointing to a small rectangular component (no visible text or symbols)

Close-up of a hand pressing down on a mechanical component with a white arrow indicating motion (no visible text or symbols)

TRANSPORT OCH FÖRVARING

KLARG∅RING AF ST∅VSUGEREN

Close-up of a hand adjusting a small mechanical device with arrows pointing to the component (no visible text or symbols)

Close-up of a metallic mechanical component with internal slots and a central slot (no visible text or symbols)

Hand holding a black cylindrical object with a white label, against a dark background (no visible text or symbols)

Close-up of a mechanical component with a white arrow pointing to a small rectangular feature (no visible text or symbols)

Close-up of a hand pressing down on a mechanical component with a white arrow indicating downward motion (no text or symbols visible)

Close-up of a hand adjusting a small mechanical device with arrows pointing to the component (no visible text or symbols)

Close-up of a mechanical component with internal channels and a handle, held by gloved hands (no visible text or symbols)

Hand holding a black mechanical component (no visible text or symbols)

Close-up of a mechanical component with a white arrow pointing to a small component (no visible text or symbols)

Close-up of a hand pressing down on a mechanical component with a white arrow pointing to a section (no visible text or symbols)

Close-up of a hand adjusting a small mechanical device with arrows indicating motion (no visible text or symbols)

Close-up of a metallic mechanical component with internal slots and a handle (no visible text or symbols)

Hand holding a black camera lens component (no visible text or symbols)

Close-up of a mechanical component with a white arrow pointing to a small rectangular component (no visible text or symbols)

Close-up of a hand pressing down on a mechanical component with a white arrow pointing to a section (no visible text or symbols)

To get the best out of your new vacuum cleaner, please read through these instructions carefully before using it for the first time. We also recommend that you keep the instructions for future reference, so that you can remind yourself later of the functions of your vacuum cleaner.

SAFETY MEASURES

• The vacuum cleaner, cord or plug must not be placed in water or any other liquid.
• Never touch the vacuum cleaner, cord or plug with wet or damp hands.
• Never leave the vacuum cleaner unattended when it is switched on. Children should be supervised when they use the vacuum cleaner.
• Switch the vacuum cleaner off and unplug it when it is not in use, before cleaning, and before you empty the dust container or clean the filters.

- A void pulling the cord when removing the plug from the socket. Instead, hold the plug. Keep hold of the plug when rewinding the cord, so that it does not strike the vacuum cleaner. Keep the cord and appliance away from heat sources, hot objects and naked flames.

- T o prevent overheating, the cord must be at least 2/3 unrolled if the vacuum cleaner is to be used for a long period (more than 30 minutes).

- Never use the appliance if it, the cord or plug is damaged or if the appliance is not functioning correctly. Never use the vacuum cleaner if the filters have not been fitted.

- Only use accessories manufactured or recommended by the manufacturer.

• The appliance is for indoor use only. Do not use it on wet surfaces. Take particular care when vacuuming stairs, due to the risk of falling or the vacuum cleaner falling and breaking.
• Do not use the appliance to vacuum up matches, hot ashes, cigarette butts, hard or sharp objects, wet or damp substances, combustible materials (petrol, solvents, etc.) or vapour from these.
• Do not cover the appliance's suction or exhaust port. Ensure that you keep clothing, hair and body parts away from the nozzle and moving parts of the vacuum cleaner.
• Never try to repair the vacuum cleaner yourself. If the appliance, cord or plug needs to be repaired, it should be taken to an authorised service centre. Please contact the store where you bought the device for repairs under guarantee.

KEY TO THE VACUUM CLEANER'S PARTS

1. Locking mechanism

2. Telescopic tube

3. Hose

4. Air valve

5. Handle

6. Hose connector

7. Dust container

8. Release button

9. Carrying handle

10. Button for automatic cord rewind

11. On/Off button

12. Button for controlling suction strength

13. Parking holder

14. Cord and plug

15. Exhaust filter

16. Holder for combination nozzle

17. Window for dust container

18. Combination nozzle

19a. Combination nozzle, extended

PREPARING THE VACUUM CLEANER

- Attach the hose (4) to the vacuum cleaner by inserting it into the hose connector (7) until you hear a click. To remove the hose, press the buttons at the side of the hose and pull it out of the hose connector.

- Fit the telescopic tube (3) into the other end of the hose, and attach the floor nozzle (1) to the end of the tube.

- You can adjust the length of the telescopic tube by pushing the locking mechanism (2) down and pulling on the bottom section of the tube until it reaches a suitable length. When parking, shorten the tube as far as possible.

- The vacuum cleaner's combination nozzle (19) is used for particular vacuuming tasks (see under Use). Remove the floor nozzle and fit the combination nozzle to the end of the telescopic tube.

USE

- Pull the cord (15) out of the vacuum cleaner. The cord must not be pulled out any further than the red mark. Plug in and switch the power on.

- P r ess the on/off button (12) to start and stop the vacuum cleaner.

- While in use, the suction strength can be regulated by opening and closing the air valve (5) on the handle at the end of the hose.

- The suction strength can also be adjusted electronically using the button for controlling suction strength (13). Suction strength increases when the button is turned towards "Max", and reduces when it is turned towards "Min".

• The nozzles are to be used as follows:

Floor nozzle Floors (brushes out)

Carpets (brushes in)

Combination nozzle Radiators, corners, skirtings, etc.

Combination nozzle Furniture, curtains, extended (19a) drapes, books, frames, etc.

- The floor nozzle has two settings. When cleaning hard surfaces (parquet flooring, flooring tiles, etc.), the nozzle brushes should be extended. When cleaning carpets and rugs, the brushes should be retracted into the nozzle. Press the brush change button (1a) to switch between the two settings.

- If, during vacuuming, you need to pause to move furniture etc., you can place the floor nozzle in the parking holder (14) using the fixture on the back of the nozzle.

FILTERS

This vacuum cleaner is not equipped with a dust bag. The dust/dirt is sucked up into the transparent dust container (8) instead. Once the dust is in this container, it whirls around so that it does not block suction. The air sucked in is cleaned by means of a washable permanent filter in the dust container, a motor protection filter and an exhaust filter.

Important!

You must never vacuum without all three filters or when a filter is damaged. If you do, dust may penetrate into the interior of the vacuum cleaner and damage the motor.

Emptying the dust container and cleaning the permanent filter

It is easy to see when the transparent dust container needs emptying.

Close-up of a hand adjusting a small mechanical device with arrows pointing to the component (no visible text or symbols)

1. Turn off the vacuum cleaner, and remove the plug from the wall socket.

2. Check whether the dust container is full, using the window (18).

3. Remove the dust container from the vacuum cleaner by pressing the release button (9) and lifting the handle on the dust container (see image on the right).

Close-up of a metallic mechanical component with internal slots and a handle (no visible text or symbols)

1. Take the dust container to a dustbin.

2. Turn the upper section of the dust container anticlockwise, so the downward-pointing arrow on the far left of the upper section lines up with the arrow on the lower section.

3. Lift the upper section off the lower section, and empty the container.

Hand holding a black mechanical component, no visible text or symbols

1. Turn the permanent filter clockwise, remove it from the upper section and tap it gently. (We recommend that you do this while holding the filter in a bag).

2. Brush the filter with a small brush or wash it in lukewarm water without any detergent or similar.

3. Allow the filter to dry completely, replace it on the upper section by turning it clockwise, refit the upper section on the lower section, and insert the dust container back into the vacuum cleaner. Press down until you hear a click.

Motor protection filter

Close-up of a mechanical component with a white arrow pointing to a small rectangular component (no visible text or symbols)

The motor protection filter is the detachable filter pad located beside the dust container. It should be removed from time to time and, after brushing off any dust, cleaned using water and a small amount of mild detergent. Allow the filter to

dry completely and replace it.

Exhaust filter

Close-up of a hand pressing down on a mechanical component with a white arrow indicating downward motion (no text or symbols visible)

This exhaust filter should also be cleaned regularly to maintain suction power. Press the release button on the filter holder on the back of the vacuum cleaner. Remove the filter and clean it, or replace the filter. If you use water to clean the filter, it must be completely dry before being replaced in the vacuum cleaner.

TRANSPORT AND STORAGE

• You can lift and carry the vacuum cleaner using the carrying handle (10). Never pull or lift the vacuum cleaner by the cord.
• Before putting the vacuum cleaner away, rewind the cord. Switch off at the socket, unplug, and press the automatic cord rewind button (11) until the cord is fully rewound.
• T o save space, the vacuum cleaner can be stored upright on its end cover.

CLEANING

• Clean the vacuum cleaner by wiping it with a damp cloth.
• Y ou must not use any form of solvent, or strong or abrasive cleaning agent.
• Make sure all filters are kept clean (see above). Replace the filters once they become worn or can no longer be cleaned.

ENVIRONMENTAL TIPS

When electronic products no longer work, they should be disposed of in a manner that causes least impact on the environment and in accordance with any local legislation. In most cases you can take such products to your local recycling station.

GUARANTEE TERMS

The guarantee does not apply:

• if the above instructions are not followed
• if the appliance has been interfered with
• if the appliance has been mishandled, subjected to rough treatment, or has suffered any other form of damage
• if faults have arisen as a result of faults in your electricity supply.

Due to the constant development of our products in terms of function and design, we reserve the right to make changes to the product without prior warning.

IMPORTER

Adexi Group

We cannot be held responsible for any printing errors.

DE

EINLEITUNG

Close-up of a hand adjusting a small robotic vacuum cleaner's helmet (no visible text or symbols)

Close-up of a metallic mechanical component with internal slots and a handle, held by gloved hands (no visible text or symbols)

Hand holding a black mechanical component with a white label (no visible text or symbols)

Close-up of a mechanical component with a white arrow pointing to a small rectangular component (no visible text or symbols)

Close-up of a hand pressing down on a mechanical component with a white arrow pointing to a detail (no visible text or symbols)

Close-up of a hand adjusting a small mechanical device with directional arrows (no visible text or symbols)

Close-up of a metallic mechanical component with internal slots and a handle (no visible text or symbols)

Hand holding a black mechanical component (no visible text or symbols)

Close-up of a mechanical component with a white arrow pointing to a small component (no visible text or symbols)

Close-up of a hand pressing down on a mechanical component with a white arrow indicating motion (no visible text or symbols)

Close-up of a hand adjusting a small mechanical device with a handle (no visible text or symbols)

Close-up of a hand holding a metallic device with internal compartments and a handle (no visible text or symbols)

Hand holding a black cylindrical object with a white label, no visible text or symbols

Close-up of a mechanical component with a white arrow pointing to a small rectangular feature (no visible text or symbols)

Close-up of a hand pressing down on a mechanical component with a white arrow pointing to a detail (no visible text or symbols)