Touring 450i GT - Iron OBH NORDICA - Free user manual and instructions
Find the device manual for free Touring 450i GT OBH NORDICA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Steam Iron |
| Brand | OBH Nordica |
| Model | Touring 450i GT |
| Dimensions (L x W x H) | Approx. 300 x 120 x 150 mm |
| Weight | Approx. 1.5 kg |
| Power Consumption | 2400 W |
| Voltage | 220-240 V ~ 50/60 Hz |
| Water Tank Capacity | 300 ml |
| Soleplate Material | Stainless Steel / Ceramic |
| Steam Output | Up to 40 g/min continuous |
| Steam Boost | Yes, up to 150 g/min |
| Spray Function | Yes |
| Anti-Drip System | Yes |
| Auto Shut-Off | Yes, after 8 min of inactivity |
| Self-Cleaning | Yes, anti-calc function |
| Vertical Steaming | Yes |
| Cord Length | 2.5 m |
| Water Level Indicator | Yes |
| Care and Maintenance | Use distilled water; clean soleplate with damp cloth; empty tank after use |
| Safety Features | Auto shut-off, heat-resistant handle, stable heel rest |
| Replacement Parts | Water tank cap, soleplate repair kit available from OBH Nordica |
| Warranty | 2 years |
Frequently Asked Questions - Touring 450i GT OBH NORDICA
How do I clean the soleplate?
Allow the iron to cool completely, then wipe the soleplate with a damp cloth. For stubborn residue, use a mixture of water and vinegar. Avoid abrasive cleaners.
What type of water should I use?
Use distilled or demineralized water to prevent mineral buildup. Tap water can be used, but may require more frequent self-cleaning.
How do I activate the steam boost?
Press the steam boost button (usually located on the handle) firmly. Ensure the iron is set to a high temperature and the water tank is filled.
Why is my iron not producing steam?
Check if the water tank is empty, the temperature setting is too low, or the anti-drip system is active. Also ensure the steam button is pressed correctly.
How does the auto shut-off work?
The iron automatically turns off if left untouched for 8 minutes in a horizontal position or 30 seconds on its side. Move it to reactivate.
Can I use the iron vertically?
Yes, the Touring 450i GT supports vertical steaming for hanging garments. Hold the iron upright and press the steam boost button.
How do I perform the self-cleaning function?
Fill the tank to max, set the iron to maximum temperature, unplug it, then hold it horizontally over a sink and press the self-clean button. Steam and debris will flush out.
What does the anti-drip system do?
The anti-drip system prevents water from leaking out of the soleplate when the iron is too cool for steam, protecting your clothes from water spots.
How long is the power cord?
The power cord is approximately 2.5 meters long, providing good mobility while ironing.
Where can I find replacement parts?
Replacement parts such as the water tank cap or soleplate can be ordered from the OBH Nordica website or authorized service centers.
User questions about Touring 450i GT OBH NORDICA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Iron in PDF format for free! Find your manual Touring 450i GT - OBH NORDICA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Touring 450i GT by OBH NORDICA.