Flat-200 - Satellite receiver Clarke-tech - Free user manual and instructions
Find the device manual for free Flat-200 Clarke-tech in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Satellite Receiver |
| Brand | Clarke-tech |
| Model | Flat-200 |
| Dimensions (W x D x H) | Approx. 22 x 15 x 4 cm |
| Weight | Approx. 0.5 kg |
| Power Supply | DC 12V, 1A (via included adapter) |
| Power Consumption | Max. 12W |
| Input Frequency Range | 950-2150 MHz |
| Input Signal Level | -65 to -25 dBm |
| LNB Power Supply | 13/18V, 500mA max |
| Video Output | HDMI, Composite (RCA) |
| Audio Output | HDMI, Stereo RCA |
| Supported Video Resolutions | 720p, 1080i, 1080p |
| Supported Audio Formats | MPEG-1, MPEG-2, MPEG-4, AAC, AC3 |
| Number of Channels | Up to 5000 |
| DiSEqC Support | DiSEqC 1.0, 1.1, 1.2 |
| USB Port | 1 x USB 2.0 for PVR and media playback |
| Ethernet Port | 10/100 Mbps for IPTV and firmware updates |
| Remote Control | Includes IR remote with batteries |
| Main Functions | Satellite TV reception, PVR recording, time shift, media player, EPG, parental lock |
| Maintenance | Clean with dry soft cloth; avoid solvents |
| Safety | Use only supplied power adapter; do not expose to moisture |
| Spare Parts & Repairability | Remote control and power adapter available; do not attempt internal repair |
| General Information | Intended for indoor use only; operating temperature 0-40°C |
Frequently Asked Questions - Flat-200 Clarke-tech
How do I connect the Flat-200 to my TV?
Connect the HDMI cable from the receiver's HDMI port to your TV's HDMI input. Alternatively, use composite cables (yellow, red, white) for older TVs.
Can I record TV programs with this receiver?
Yes, the Flat-200 supports PVR recording. Connect a USB flash drive or external hard drive (formatted to FAT32) to the USB port, then press the Record button on the remote during a program.
How do I set up the satellite dish?
Use the antenna setup menu on the receiver. In the installation menu, select your satellite (e.g., Astra, Hotbird) and adjust the dish azimuth and elevation until signal strength and quality bars are high.
Why is there no signal on my Flat-200?
Check that the LNB cable is securely connected to the receiver's LNB IN port. Verify dish alignment and that the LNB is powered (13/18V). Run a signal scan in the installation menu.
Does it support DiSEqC for multi-satellite setups?
Yes, it supports DiSEqC 1.0, 1.1, and 1.2. In the antenna settings, enable DiSEqC and assign each port to a satellite position.
How do I update the firmware?
Download the latest firmware from the Clarke-tech website (if available) onto a USB stick. Insert the stick into the receiver, go to the system settings menu, and select 'Software Upgrade'.
Can I watch IPTV channels on this receiver?
Yes, via the Ethernet port. Connect to your router, then in the network settings enable IPTV. You may need to add provider playlists manually.
What media formats can it play via USB?
It supports MP4, AVI, MKV for video, MP3, WAV for audio, and JPEG, BMP for photos. Use FAT32 formatted drives.
How do I reset the receiver to factory settings?
Go to System Settings and select 'Factory Default' or 'Reset'. Confirm with the remote. This will erase all saved channels and settings.
Where can I find the user manual?
The manual is available for free download on notice-facile.com in PDF format. Search for 'Clarke-tech Flat-200'.
User questions about Flat-200 Clarke-tech
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Satellite receiver in PDF format for free! Find your manual Flat-200 - Clarke-tech and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Flat-200 by Clarke-tech.