DA-660-16-LX - Thin client Moxa - Free user manual and instructions
Find the device manual for free DA-660-16-LX Moxa in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Industrial Thin Client / Embedded Computer |
| Brand | Moxa |
| Model | DA-660-16-LX |
| Dimensions (W x D x H) | 440 x 350 x 44 mm |
| Weight | 3.5 kg |
| Power Supply | 12-24 V DC, 36 W |
| Operating System | Linux (Moxa Embedded Linux) |
| CPU | Intel Atom or ARM-based processor |
| Memory (RAM) | 1 GB DDR3 (expandable) |
| Storage | 4 GB Flash (SD card slot) |
| Ethernet Ports | 16 x 10/100 Mbps |
| Serial Ports | 2 x RS-232/422/485 |
| USB Ports | 4 x USB 2.0 |
| Display Output | 1 x VGA |
| Expansion Slots | 1 x PCIe Mini Card |
| Operating Temperature | -10°C to 60°C |
| Humidity | 5% to 95% (non-condensing) |
| Protection Rating | IP30 |
| Mounting | Rack-mountable (1U) or Desktop |
| Main Functions | Remote desktop client, industrial automation, data acquisition |
| Cleaning | Use a soft dry cloth; avoid liquids and abrasive cleaners |
| Safety | Follow local electrical safety regulations; use approved power supply |
| Spare Parts | Contact Moxa support for replacement parts |
Frequently Asked Questions - DA-660-16-LX Moxa
How do I connect the DA-660-16-LX to my network?
Connect an Ethernet cable from your network switch to any of the 16 Ethernet ports on the front panel. The device supports auto-MDI/MDI-X, so a crossover cable is not required.
What power supply does the DA-660-16-LX require?
The device accepts 12-24 V DC input. Use a regulated power supply with at least 36 W capacity. Connect to the terminal block on the front panel, observing polarity.
Can I install a different operating system?
The DA-660-16-LX comes with Moxa Embedded Linux pre-installed. You can install other Linux distributions if supported by the hardware, but Moxa recommends using the provided OS for stability.
How do I access the device for the first time?
By default, the device obtains an IP address via DHCP. Use a serial console (RS-232) with a null modem cable at 115200 baud, or connect via Ethernet and use SSH with default credentials (root/root).
How do I reset the device to factory defaults?
Press and hold the reset button on the front panel for 5 seconds using a paperclip. The device will reboot and restore factory settings, including IP configuration.
Can I expand the storage?
Yes, the device has an internal SD card slot for additional storage. You can also use USB drives connected to the USB ports.
How do I clean the DA-660-16-LX?
Disconnect power before cleaning. Use a soft, lint-free cloth slightly dampened with water or isopropyl alcohol. Do not use abrasive cleaners or immerse in liquid.
What is the operating temperature range?
The device operates from -10°C to 60°C (14°F to 140°F). Ensure adequate ventilation and avoid exposure to extreme temperatures.
Does the device support PoE?
No, the Ethernet ports are data-only and do not supply Power over Ethernet (PoE). Use the dedicated power terminal block for power input.
Where can I find the user manual?
The user manual is available for free download in PDF format from the official Moxa website or from notice-facile.com. Search for model DA-660-16-LX.
User questions about DA-660-16-LX Moxa
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Thin client in PDF format for free! Find your manual DA-660-16-LX - Moxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DA-660-16-LX by Moxa.