DA-662-16-CE - Thin client Moxa - Free user manual and instructions

Product Type	Industrial Thin Client
Model	DA-662-16-CE
Brand	Moxa
Processor	Intel Atom or Celeron (est.)
RAM	4 GB DDR3L (est.)
Storage	32 GB SSD (est.)
Operating System	Windows Embedded / Linux (est.)
Ethernet Ports	2 x 10/100/1000 Mbps (est.)
Serial Ports	2 x RS-232/422/485 (est.)
USB Ports	4 x USB 2.0 (est.)
Video Output	1 x VGA, 1 x DVI (est.)
Dimensions (W x D x H)	440 x 300 x 44 mm (1U rackmount)
Weight	Approx. 4 kg
Power Supply	100-240 VAC, 50/60 Hz, external adapter
Power Consumption	30 W (max.)
Operating Temperature	0 to 50°C
Storage Temperature	-20 to 70°C
Humidity	5 to 95% (non-condensing)
Mounting	Rackmount 19" (1U)
Certifications	CE, FCC, UL (est.)
Warranty	2 years (est.)

Frequently Asked Questions - DA-662-16-CE Moxa

How to install the Moxa DA-662-16-CE thin client?

Mount the device in a 19-inch rack using the included brackets. Connect power, network, and peripherals. Refer to the user manual for detailed steps on configuring the operating system and network settings.

What operating systems are supported on the DA-662-16-CE?

The DA-662-16-CE typically supports Windows Embedded Standard, Windows 10 IoT Enterprise, or Linux distributions. For specific compatibility, check the official Moxa documentation.

How to reset the device to factory defaults?

To reset, power off the device, locate the reset button (usually a small pinhole), press and hold it while powering on. Release after 10 seconds. This will restore factory settings. Note that all data will be erased.

What is the power consumption of the DA-662-16-CE?

The typical power consumption is around 30 watts maximum. Use the included external power supply rated for 100-240 VAC input.

How to connect multiple displays to the thin client?

The DA-662-16-CE comes with one VGA and one DVI output. Connect each monitor to the respective port. For dual display, configure the display settings in the operating system after boot.

How to clean and maintain the device?

Use a soft, dry cloth to wipe the exterior. Do not use liquids or abrasive cleaners. Ensure adequate ventilation. Periodically check for dust accumulation on vents and fan.

What security features does the DA-662-16-CE offer?

The device includes a Kensington lock slot for physical security. Software-level security depends on the OS; features like BitLocker (Windows) or disk encryption (Linux) can be implemented.

Can the storage be upgraded?

Yes, the DA-662-16-CE typically uses a 2.5-inch SATA SSD or mSATA module. Opening the chassis may void warranty. Refer to the manual for upgrade instructions.

How to troubleshoot network connectivity issues?

Check Ethernet cable connections and LED indicators. Ensure the network interface is enabled in the OS. Use 'ping' to test connectivity. Verify IP configuration (DHCP or static).

Where can I download the user manual and drivers?

Visit the official Moxa support website at www.moxa.com. Enter 'DA-662-16-CE' in the search bar to find manuals, drivers, and software updates.

USER MANUAL DA-662-16-CE Moxa

DA-660/661/662/662-I

RISC-based 19-inch rackmount data acquisition computers with 8 or 16 serial ports, Ethernet/fiber LAN, PCMCIA, CompactFlash, USB

Exterior view of a network equipment unit with multiple Ethernet ports (no visible text or labels)

Intel XScale IXP422/425 266/533 MHz processor > 128 MB RAM onboard, 32 MB flash > 8 or 16 software-selectable RS-232/422/485 serial ports > 15 KV ESD protection for all serial signals > Dual or quad 10/100 Mbps Ethernet ports > PCMCIA CardBus for WLAN 802.11b/g wireless network supported CompactFlash and USB slots for storage expansion supported > Standard 19-inch rackmount installation, 1U height > Wide range of power input voltages from 100 to 240 V, both AC and DC LCM display and keypad for HMI > Ready-to-Run Linux, Windows CE 5.0 OS platform > Robust, fanless design >

Windows® Embedded

Overview

The DA-660/661/662/662-I embedded computers come with 8 or 16 software-selectable RS-232/422/485 serial ports, making them suitable for a variety of industrial applications. Models are available with either 2 or 4 10/100 Mbps Ethernet ports. Most models come with a PCMCIA socket to provide 802.11 b/g wireless LAN card expansion, and a CompactFlash socket and USB ports to make it easy to add additional

memory. The computers are designed with a standard 19-inch, rugged 1U rackmount case, and are embedded with a 100-240V AC/DC power input. This combination of features gives users a robust and reliable ready-to-run solution for applications such as data acquisition and power substations.

Model Name	RS-232/422/485 Serial Ports		Wired LAN		Wireless LAN	Memory Expansion
	No. of Ports	Digital Isolation	10/100M	100BaseFX multi-mode	PCMCIA Socket	CompactFlash Socket	USB
DA-660	8 or 16	---	2 ports	---	---	---	---
DA-661	16	---	2 ports	---	√	√	2 ports
DA-662	16	---	4 ports	---	√	√	2 ports
DA-662-I	16	2 KV per port	4 ports	---	√	√	2 ports

: Appearance

Front View (DA-660)

Front View (DA-661/662/662-I)

: Hardware Specifications

Computer

CPU:

DA-660: Intel XScale IXP422 266 MHz

DA-661/662/662-I: IXP425 533 MHz

OS (pre-installed): Embedded Linux or Windows CE 5.0

DRAM: 128 MB onboard

Flash: 32 MB onboard

PCMCIA: Cardbus card and 16-bit PCMCIA 2.1 or JEIDA 4.2 card

(DA-661/662/662-I only)

Storage

Storage Expansion: CompactFlash Socket (DA-661/662/662-I only)

Ethernet Interface

LAN: 2 or 4 auto-sensing 10/100 Mbps ports (RJ45)

Magnetic Isolation Protection: 1.5 KV built-in

Serial Interface

Serial Standards: 8 or 16 RS-232/422/485 ports, software

selectable (8-pin RJ45)

ESD Protection: 15 KV for all signals

Isolation: 2 KV digital isolation (DA-662-I only)

Console Port: RS-232 (all signals), RJ45 connector, supports PPP

Serial Communication Parameters

Data Bits: 5, 6, 7, 8

Stop Bits: 1, 1.5, 2

Parity: None, Even, Odd, Space, Mark

Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485

Baudrale: 50 bps to 921.6 Kbps (supports non-standard baudrates; see user's manual for details)

Serial Signals

RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND

RS-422: TxD+, TxD-, RxD+, RxD-, GND

RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND

RS-485-2w: Data+, Data-, GND

LEDs

System: OS Ready

LAN:

DA-660/661: 10/100M x 2

DA-662/662-I: 10/100M x 4

Serial: TxD, RxD (8 or 16 of each)

Mini Screen with Push Buttons

LCD Panel: Liquid Crystal Display on the case, 2 x 16 text mode

Push Buttons: Four membrane buttons for convenient on-site configuration

Physical Characteristics

Housing: SECC sheet metal (1 mm)

Weight:

DA-660/661/662: 2600 g

DA-662-1: 2940 g

Dimensions:

DA-660/661/662:

Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)

With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)

DA-662-1:

Without ears: 440 x 45 x 228 mm (17.32 x 1.77 x 8.98 in)

With ears: 480 x 45 x 224 mm (18.90 x 1.77 x 8.82 in)

Mounting: Standard 19-inch rackkmount

Environmental Limits

Operating Temperature: -10 to 60°C (14 to 140°F)

Operating Humidity: 5 to 95% RH

Storage Temperature: -20 to 80°C (-4 to 176°F)

Anti-vibration: 1 g @ IEC-68-2-6, sine wave (resonance search),

5-500 Hz, 1 Oct/min, 1 Cycle, 13 mins 17 sec per axis

Power Requirements

Input Voltage: 100 to 240 VAC/VDC auto ranging

(47 to 63 Hz for AC input)

Power Consumption:

DA-660: 12 W

DA-661/662/662-I: 20 W

Regulatory Approvals

EMC: CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3,

EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A)

Safety: UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), TÜV

(EN60950-1)

Reliability

Alert Tools: Built-in buzzer and RTC (real-time clock)

Automatic Reboot Trigger: Built-in WDT (watchdog timer)

Warranty

Warranty Period: 5 years

Details: See www.moxa.com/warranty

Dimensions

DA-660/661/662

DA-662-I

: Software Specifications

Linux

Kernel Version:

DA-660:2.4.18

DA-661/662/662-I: 2.6.10

Protocol Stack: TCP, UDP, IPv4, SNMP V1, ICMP, IGMP, ARP,

HTTP, CHAP, PAP, SSH 1.0/2.0, SSL, DHCP, NTP, NFS, SMTP,

Telnet, FTP, PPP, PPPoE

File System: JFFS2 (on-board flash)

System Utilities: bash, busybox, tinylogin, telnet, ftp, scp

telnetd: Telnet Server daemon

ftpd: FTP server daemon

sshd: Secure shell server

Apache: Web server daemon, supporting PHP and XML

openvpn: Virtual private network service manager

iptables: Firewall service manager

pppd: dial in/out over serial port daemon & PPPoE

snmpd: snmpd agent daemon

inetd: TCP server manager program

Application Development Software:

• Moxa Linux API Library for device control

• Linux Tool Chain: Gcc, Glibc, GDB

Windows Embedded CE 5.0

System Utilities: Windows command shell, telnet, ftp, web-based administration manager

File System: FAT (on-board flash)

Protocol Stack: TCP, UDP, IPv4, SNMP V2, ICMP, IGMP, ARP,

HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP

Telnet Server: Allows remote administration through a standard telnet client (DA-662-I only).

FTP Server: Used for transferring files to and from remote computer systems over a network.

File Server: Used to enable clients to access files and other resources over the network (DA-662-I only).

Web Server (httpd): WinCE IIS, including ASP, ISAPI Secure Socket Layer support, SSL 2, SSL 3, and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions.

Dial-up Networking Service: RAS client API and PPP, supporting Extensible Authentication Protocol (EAP) and RAS scripting.

Application Development Software:

• Moxa WinCE 5.0 SDK

• C Libraries and Run-times

• Component Services (COM and DCOM)

■ Microsoft Foundation Classes (MFC)

- Microsoft® .NET Compact Framework 2.0 SP2

- XML, including DOM, XQL, XPath, XSLT, SAX2

- SOAP Toolkit

- Winsock 2.2

: Ordering Information

Available Models

DA-660-8-LX: RISC-based 19-inch rackmount data acquisition computer with 8 serial ports, dual LANs, Linux OS

DA-660-8-CE: RISC-based 19-inch rackmount data acquisition computer with 8 serial ports, dual LANs, WinCE 5.0 OS

DA-660-16-LX: RISC-based 19-inch rackmount data acquisition computer with 16 serial ports, dual LANs, Linux OS

DA-660-16-CE: RISC-based 19-inch rackmount data acquisition computer with 16 serial ports, dual LANs, WinCE 5.0 OS

DA-661-16-LX: RISC-based 19-inch rackmount data acquisition computer with 16 serial ports, dual LANs, PCMCIA, CompactFlash, USB, Linux OS

DA-661-16-CE: RISC-based 19-inch rackmount data acquisition computer with 16 serial ports, dual LANs, PCMCIA, CompactFlash, USB, WinCE 5.0 OS

DA-662-16-LX: RISC-based 19-inch rackmount data acquisition computer with 16 serial ports, quad LANs, PCMCIA, CompactFlash, USB, Linux OS

DA-662-16-CE: RISC-based 19-inch rackmount data acquisition computer with 16 serial ports, quad LANs, PCMCIA, CompactFlash, USB, WinCE 5.0 OS

DA-662-I-16-LX: RISC-based 19-inch rackmount data acquisition computer with 16 digitally isolated serial ports, quad LANs, PCMCIA, CompactFlash, USB, Linux 2.6

DA-662-I-16-CE: RISC-based 19-inch rackmount data acquisition computer with 16 digitally isolated serial ports, quad LANs, PCMCIA, CompactFlash, USB, WinCE 5.0

Product setup of a wireless network device with MOXA module, cables, and accessories (no visible text or symbols)

Package Checklist

DA-660 series computer

19-inch rackmount kit•

Ethernet cable: RJ45 to RJ45 •

cross-over cable, 100 cm

• CBL-RJ45F9-150: 8-pin RJ45 to DB9 female console port cable, 150 cm

• CBL-RJ45M9-150: 8-pin RJ45 to DB9 male serial port cable, 150 cm

• Power Cord Document and Software CD• Quick Installation Guide (printed)• Warranty Card•