WF 6044 D - Washing machine UPO - Free user manual and instructions

Product Type	Washing Machine
Brand	UPO
Model	WF 6044 D
Width (cm)	59.5
Height (cm)	85.5
Depth (cm)	55.0
Maximum Recommended Load (kg)	6.0
Maximum Spin Speed (rpm)	1400
Water Pressure (MPa)	0.05 - 1.0
Programs	Cotton 90°C, 75°C, 60°C, 40°C, 30°C; Synthetics 60°C, 40°C, 30°C; Delicates 40°C, 30°C; Wool 40°C, 30°C; Hand Wash; Quick Wash; Daily Wash 60°C, 40°C; Rinses; Drain and Spin
EASY LOGIC Technology	Automatically adjusts water and time based on load size (only for cotton programs)
Variable Spin Speed	Yes, selectable from 0 to max rpm
Delayed Start	Up to 16 hours
Optional Functions	Pre-wash, Intensive Wash, Extra Rinses, Anti-crease
Display	LED showing cycle time, spin speed, delayed start, and end indication
Load Balancing System	Electronic out-of-balance protection
Power Connection	See rating plate
Dimensions (cm)	59.5 x 85.5 x 55.0

Frequently Asked Questions - WF 6044 D UPO

How do I set the delayed start on my UPO WF 6044 D washing machine?

Press the Delayed Start button (I) repeatedly to select a delay from 1 to 16 hours. Then press the Start button (L). The display will show the remaining time, and the machine will start automatically after the delay.

What is the EASY LOGIC technology?

EASY LOGIC is an automatic system that detects the amount of laundry loaded. It adjusts water usage and wash time accordingly, saving water and energy. This function works only for cotton programs. For half-load or less, it also reduces rinses by one.

How can I change the spin speed?

Before starting a program, press the Spin selection button (H) repeatedly to toggle through available speeds. The maximum speed is 1400 rpm. To exclude spinning entirely, select '00' on the display.

Why does the door not open after a program is cancelled?

After turning the program knob to STOP or resetting, wait approximately 2 minutes for the door lock to release. The machine has a safety mechanism that prevents immediate opening.

Which detergent should I use?

Use only low-suds detergent designed for automatic washing machines. Pour detergent and fabric softener into the appropriate compartments. For pre-wash, add detergent to the pre-wash compartment.

How do I select the anti-crease function?

Press the Anti-crease button (C) before starting the program. This will cause the drum to tumble for 30 minutes after the cycle ends to reduce wrinkles. Note: maximum spin speed is limited to 800 rpm, and this function does not work for the Wool program.

What should I do if the display shows an error?

If the machine detects an imbalance, the spin speed may be reduced or the spin cycle may be skipped. For other errors, refer to the manual's troubleshooting section. Common causes include overloading or uneven laundry distribution.

Can I open the door during a cycle?

No, the door is locked during operation for safety. If you need to add laundry, turn the program knob to STOP, wait 2 minutes for the door to unlock, add items, then select a new program and press Start. This is recommended only within the first 3 minutes of the cycle.

How do I clean the detergent drawer?

Remove the detergent drawer by pulling it out. Rinse it under running water to remove any residue. Ensure it is fully dry before reinserting. The manual advises not to remove the drawer while the machine is running to avoid water leakage.

What is the maximum load for different fabric types?

The maximum recommended load is 6 kg for cotton. For synthetics, it's 4 kg; for delicates, 3 kg; and for wool, 1.5 kg. Do not overload, as it may affect washing performance and cause imbalance.

USER MANUAL WF 6044 D UPO

PESUKONEEN TÄRKEIMMÄT TOIMINNOT

PESUKONEEN KÄYTTÖ

"EASY LOGIC"-TEKNOLOGIA

I Knapp for utsatt start

ANVENDELSE AF VASKEMASKINEN

"EASY LOGIC" TEKNOLOGI

PRINCIPAL FUNCTIONS OF THE WASHING MACHINE

A LED Start
B Display
C Optional functions button
H Spin selection button
L Start button
I Delayed Start button
P Program and temperature knob

USE OF THE WASHING MACHINE

"EASY LOGIC" TECHNOLOGY

The electronic washing machine is fitted with an “EASY LOGIC” system that automatically recognises the quantity of washing loaded. The machine can thus regulate the amount of water to use for the wash and proportion the wash time accordingly, thus saving water, time and energy. In the case where the amount of washing is less than the maximum recommended load (see technical characteristics table), the quantity of water used for the wash will be reduced by 2 litres for each kg less of washing.

In the case of a half-load or less, the machine will automatically carry out one rinse less than programmed.

N.B. The "EASY LOGIC" function is only active for cotton programmes.

WASHING CYCLE:

(If this sequence of operations is followed, the washing machine will carry out the washing cycle that is set)

1. Open the door.
2. Load the laundry into the drum and carefully close the door.

Warning: You must not overload the washing machine. It is not recommended to wash articles that absorb a large amount of water, for example carpets.

1. Pour the low-suds washing powder and the fabric conditioner for automatic washing machines into their respective compartments (see the "USE OF DETERGENTS" chapter)
2. Close the detergent compartments, making sure that they are not removed while the washing machine is running, because the water could come out.
3. Turn the program selector knob (P) choosing the desired program and temperature to match the type of fabric to be washed (see: PROGRAM TABLES").

N.B. When the knob is set, the duration of the chosen cycle in minutes appears on the display. During the cycle the time shown decreases until 'END' appears, indicating the end of the program.

1. Choose the desired spin speed pressing button (H) (see "VARIABLE SPIN").
2. Select the buttons (C) with the functions to be used (see "OPTIONAL FUNCTIONS"). The pressed buttons will light up and the time shown on the display will vary according to the functions that are set.
3. Press button (I) if required (see "DELAYED START").
4. Press button (L) to start the washing cycle (see "START BUTTON").
5. At the end of the wash, turn the program selector knob (P) to "STOP".
6. Open the door and remove the laundry.
7. With dry hands, remove the washing machine plug from the mains socket.
8. Close the water supply tap.

VARIABLE SPIN:

The machine offers a wide choice of spin settings that can be selected before starting the program. To vary the spin setting just press button (H) until the desired value is reached (fi g. 1); if you wish to exclude the spin, press the button until "00" appears on the display (fi g. 2).

N.B. The maximum spin speed varies according to the model and is shown on the machine display. The maximum spin speed that can be selected decreases with the program that is set.

Out of balance spin protection for the load:

This washing machine is equipped with a special electronic control system for the correct balancing of the load. Before each spin, the system makes the clothes arrange themselves in the drum in the most even way possible. In case of irregular distribution of the laundry, for safety reasons the spin speed is reduced and in cases of the load being greatly out of balance, the spin cycle will not be effected.

DISPLAY AND DURATION OF THE WASHING CYCLE:

With each program selected with the knob (P), the corresponding spin speed and the duration of the cycle will appear on the display; this time will decrease until it arrives at zero when the program is finished and "END" appears on the display. At this point it will be possible to take out the laundry.

N.B. In the “Cotton” programs, the duration of the washing cycle initially shown by the display can vary, since it can be affected by various factors such as temperature, water inlet pressure and quantity of laundry loaded in the drum. During the wash, the machine’s electronics will automatically alter the time needed for the cycle set according to these factors, thus achieving the best performance in the best time.

DELAYED START BUTTON:

The machine is equipped with a function that enables you to delay the wash for up to a maximum of 16 hours; each time button (I) is pressed, the display will show the hours to wait from 1...to 16 before the machine begins the washing cycle. When key (L) is pressed, the washing machine will wait the set number of hours and will then automatically begin the washing cycle.

Activation of the delay is indicated by the flashing of the dots on the display.

START BUTTON:

After having carried out all the operations described in points 1 to 8 in the paragraph "WASHING CYCLE" press this button and the washing machine will begin its washing cycle. The relative LED will light up after 2-3 seconds, to indicate that the door is locked and the program has started.

"STOP" ON THE PROGRAM SELECTOR:

The function of stop is to reset the washing machine. If for any reason during the washing cycle you decide to vary it, or decide later to add more laundry, all you have to do is turn the knob of the program selector to the "STOP" position, then reset the knob to the new program chosen and press the "START" button.

Warning!! It is recommended to use this function only if strictly necessary and solely if the program to be reset has started not more than 3 minutes previously. Before being able to open the door after a reset, you must wait 2 minutes for it to be unlocked.

If one of the buttons listed below is selected, its symbol will appear on the display. While if you realize that you have selected it by mistake or you have changed your mind, to cancel the option, press it again.

PRE-WASH:

PREWASH

When this button is pressed, a short pre-wash with a maximum temperature of 40^ C lasting for about 10 minutes is provided. This function can only be used on the “COTTON, SYNTHETICS and DAILY” programs.

N.B. If you use this option, the detergent must also be poured into the appropriate compartment for the pre-wash.

INTENSIVE WASH:

INTENSIVE

When this button is pressed, the machine will carry out a wash at the set temperature but which lasts longer. This button works on the "COTTON and SYNTHETICS" programs.

ADDITIONAL RINSE:

EXTRA RINSES

The washing machine has been built so that water consumption is reduced to a minimum. For areas with very soft water or in the case possible residues of detergent are noticed at the end of the cycle, pressing this button the machine will add three extra rinses.

ANTI-CREASE:

ANTICREASE

When this button is pressed, at the end of the washing cycle the clothes in the washing machine continue to revolve for another thirty minutes reducing creases. With this function the maximum working spin speed is 800 rpm. The function does not work for the "WOOL" program.

N.B. Use of the optional functions is restricted by the type of program chosen; so, if the program does not allow the function, it will not be possible to enable the button (see PROGRAM TABLE).

PROGRAM TABLES

PROGRAMMER KNOB	WASH TEMPE-RATURE	SYMBOL	FABRIC TYPE	DISPENSER COMPARTMENTS	SPINN SPEED	BUTTONS ENABLED				AUTOMATIC
						PREWASH	eINTENSIVE	EXTRA RINSES	ANTICREASE
COTTON	90°		Heavily soiled white cotton fabrics with organic stains.		Max (or lower)			3 (+3)
COTTON	75°		Sheets, shirts, tablecloths, towels that are resistant and heavily soiled		Max (or lower)			3 (+3)
COTTON *	60°		For shirts, tablecloths, towels that are resistant and normally soiled		Max (or lower)			3 (+3)
COTTON	40°		White and coloured fabrics that are resistant and heavily soiled		Max (or lower)			3 (+3)

FUNCTION ENABLED ○ FUNCTION DISABLED

OPTIONAL WITH PRE-WASH BUTTON PRESSED

* Benchmark program for energy classification, in accordance with the EN 60456 standard, running at max. spin speed and with e energetic wash button selected.

PROGRAMMER KNOB	WASH TEMPE-RATURE	SYMBOL	FABRIC TYPE	DISPENSER COMPARTMENTS	SPINN SPEED	BUTTONS ENABLED				AUTOMATIC
						PREWASH	eINTENSIVE	EXTRA RINSES	ANTICREASE
COTTON	30°		Delicate coloured fabrics that are lightly soiled		Max (or lower)			3 (+3)		○
SYNTHETICS	60°		Colourfast synthetic fabrics that are heavily soiled		800 (or lower)			3 (+3)		○
SYNTHETICS	40°		Delicate coloured synthetic fabrics that are lightly soiled		800 (or lower)			3 (+3)		○
SYNTHETICS	30°		Delicate coloured synthetic fabrics that are lightly soiled		800 (or lower)			3 (+3)		○
DELICATES	40°		Delicate cotton, viscous and mixed delicate fabrics		500 (or lower)			3		**
DELICATES	30°		Delicate cotton, viscous and mixed delicate fabrics		500 (or lower)			3		**
WOOL ***	40°		Machine washable wool		800 (or lower)			3		○
WOOL	30°		Machine washable wool		800 (or lower)			3		○
DELICATES WOOL	COLD		Machine washable wool, silk and delicate mixed fabrics		800 (or lower)			3		○
HAND WASH	30°		Hand washable fabrics		800 (or lower)			3		**
QUICK WASH	35°		Quick wash of approximate duration 35-40 minutes for lightly soiled fabrics.		Max (or lower)			2		○
DAILY WASH	60°		Short wash for cotton and resistant fabrics requiring frequent washing		Max (or lower)			4 (+3)		○
DAILY WASH	40°		Short wash for cotton and resistant fabrics requiring frequent washing		Max (or lower)			4 (+3)		○
RINSES	—		To rinse and refresh the washing		Max (or lower)			3 (+3)		○
DRAIN AND SPIN	—		Drain and final spin		Max (or lower)			○		○

FUNCTION ENABLED ○ FUNCTION DISABLED

OPTIONAL WITH PRE-WASH BUTTON PRESSED

** Press start to continue the program.
*** The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable Woolmark products provided that the garments are washed according to the instructions on the garment label and those issued by the manufacturer of this washing machine. M0402-M0403-M0404-M0405.

MODEL →		WF 6044 D
Dimensions:	Width cm.:	59.5
	Height cm.:	85.5
	Depth cm.:	55.0
Maximum recommended load:		6,0 Kg
		4.0 Kg
		3,0 Kg
		1,5 Kg
Max. spin: (rpm)		1400
Water pressure:		min. 0.05 MPa - max. 1 MPa
Max. absorbed power/Electrical connection		see rating plate

NOTES: