SGS 56E48 - Dishwasher BOSCH - Free user manual and instructions
Find the device manual for free SGS 56E48 BOSCH in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Dishwasher |
| Model | SGS 56E48 |
| Brand | Bosch |
| Dimensions (H x W x D) | 81.5 cm x 59.8 cm x 57.3 cm |
| Weight | 43 kg |
| Energy Efficiency Class | A++ |
| Annual Energy Consumption | 266 kWh |
| Water Consumption per Cycle | 9.5 L |
| Noise Level | 44 dB(A) |
| Capacity | 13 Place Settings |
| Number of Programs | 6 |
| Programs | Eco 50°C, Auto 45-65°C, Intensive 70°C, Quick 45°C, Glass 40°C, Rinse |
| Additional Functions | VarioSpeed, HygienePlus, Extra Dry |
| Drying System | Heat Exchanger |
| Safety Features | AquaStop, Child Lock |
| Interior Features | VarioFlex Basket, Rackmatic Height Adjustment |
| Display | LED |
| Power Consumption (Off Mode) | 0.1 W |
| Installation Type | Under Counter |
| Noise Emission Class | B |
Frequently Asked Questions - SGS 56E48 BOSCH
How do I start a wash cycle on my Bosch SGS 56E48 dishwasher?
Load the dishes, add detergent, select a program using the program selection button, then press the Start button. Close the door securely to begin.
What does the 'E:15' error code mean?
Error E:15 indicates a water intake fault. Check that the water supply is turned on and the inlet hose is not kinked. If the problem persists, contact service.
How do I clean the filter?
Remove the lower basket, turn the microfilter counterclockwise and lift out. Rinse under running water, replace, and lock by turning clockwise. Clean monthly.
Why is there water left at the bottom of the dishwasher after a cycle?
This may be caused by a clogged filter or drain pump blockage. Clean the filter and check the drain pump for obstructions. Also ensure the drain hose is not kinked.
How do I add rinse aid?
Open the rinse aid dispenser (located next to the detergent compartment). Fill with rinse aid up to the max mark. Close the flap until it clicks. Adjust the dosage if needed.
What type of detergent should I use?
Use a dishwasher detergent (powder, gel, or tablets). For best results with the Eco program, use detergent with phosphate (if allowed in your region) and adjust dosage based on water hardness.
How do I activate the Child Lock?
Press and hold the Child Lock button (usually marked with a key icon) for 3 seconds until the indicator lights up. Repeat to deactivate. This prevents unintentional button presses.
What is AquaStop and how does it work?
AquaStop is a safety system that prevents water leaks. It consists of a solenoid valve and a waterproof hose. If a leak is detected, the water supply is automatically cut off and the pump activates.
How do I adjust the water hardness setting?
Refer to the manual to enter setup mode (usually by pressing and holding the Program button). Use the program buttons to set the hardness level based on a test strip. Higher number = harder water.
Can I use the dishwasher without salt?
In soft water areas (< 4 °dH), you may omit salt, but it is recommended to use dishwasher salt to protect the water softener and prevent limescale. Use salt if your water hardness is above 4 °dH.
User questions about SGS 56E48 BOSCH
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual SGS 56E48 - BOSCH and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SGS 56E48 by BOSCH.