Smart 6297 90000 - Pressure gauge Eta - Free user manual and instructions
Find the device manual for free Smart 6297 90000 Eta in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Pressure Gauge |
| Brand | Eta |
| Model | Smart 6297 90000 |
| Dimensions (approx.) | 150 x 50 x 30 mm (estimated) |
| Weight (approx.) | 100 g (estimated) |
| Power Source | 1 x CR2032 battery (included) |
| Measurement Range | 0.5 – 100.0 psi (0.03 – 6.9 bar) |
| Accuracy | ±0.5 psi (±0.03 bar) |
| Display Units | psi, bar, kPa (switchable) |
| Display Type | LCD with backlight |
| Backlight | Yes, blue LED |
| Auto-Off | Yes, after 30 seconds of inactivity |
| Measuring Function | Single measurement with hold |
| Cleaning | Wipe with a soft, dry cloth. Do not immerse in water. |
| Safety | Dispose of used batteries according to local regulations. |
| Spare Parts | Battery (CR2032) is replaceable. No other user-serviceable parts. |
| Warranty | 2 years (subject to terms and conditions) |
Frequently Asked Questions - Smart 6297 90000 Eta
How do I turn on the Eta Smart 6297 pressure gauge?
Press and hold the ON/OFF button for 2 seconds. The display will light up and show zero. If it does not turn on, replace the CR2032 battery with a new one.
How do I switch between psi, bar, and kPa?
Press the UNIT button (usually marked with 'UNIT' or an icon) repeatedly to cycle through psi, bar, and kPa. The selected unit will appear on the display.
How do I measure tire pressure?
Remove the valve cap from the tire, press the gauge nozzle firmly onto the valve stem until you hear a brief hiss. The reading will appear on the display. Press the HOLD button to freeze the value if needed.
What should I do if the display shows 'Err' or 'LO'?
'Err' indicates a measurement error (e.g., poor connection). Re-seat the nozzle on the valve. 'LO' means low battery: replace the CR2032 battery immediately. If problems persist, contact Eta customer support.
How do I calibrate the gauge?
The gauge is factory calibrated and does not require user calibration. If readings seem inaccurate, replace the battery first. For recalibration, contact an authorized service center.
Can I use the gauge for other gases besides air?
The gauge is designed for air only, specifically for tire pressure measurement. Do not use it for other gases or liquids, as it may damage the sensor.
How do I clean the pressure gauge?
Wipe the exterior with a soft, dry cloth. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture into the nozzle or battery compartment.
What type of battery does it use and how do I replace it?
It uses one CR2032 lithium coin battery. To replace, open the battery cover (usually on the back) using a coin or screwdriver, insert the new battery with the + side up, and close the cover securely.
Why does the gauge automatically turn off?
The auto-off feature saves battery life. The gauge powers off after 30 seconds of inactivity. To resume, press the ON/OFF button again.
Is the gauge waterproof?
No, the gauge is not waterproof. Avoid exposure to rain, splashes, or immersion. Store it in a dry place when not in use.
User questions about Smart 6297 90000 Eta
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pressure gauge in PDF format for free! Find your manual Smart 6297 90000 - Eta and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Smart 6297 90000 by Eta.