SoundJam1 - Loudspeaker Lamax - Free user manual and instructions

Product Type	Portable Bluetooth Speaker
Brand	Lamax
Model	SoundJam1
Maximum Power Output	40 W
Wireless Technology	Bluetooth 5.3
Number of Bands	2
Maximum Pairing Distance	15 m
Supported Audio Formats	MP3, WAV, FLAC
Supported Codecs	SBC
Inputs	Micro SD, USB-A (for playback and charging), AUX
Battery Capacity	1800 mAh
Playback Time	Up to 20 hours (at 50% volume)
Charging Time	Up to 2.5 hours
Charging Port	USB-C
Waterproof Rating	IPX6
Sensitivity	≥ 101 dB
Frequency Range	20 Hz – 20 kHz
Features	LED backlight, TWS (True Wireless Stereo), Power bank function
Dimensions	100 × 100 × 232 mm
Weight	1.2 kg
Controls	Volume +/-, Play/Pause, Power, Pairing/TWS, Mode, Multi-function button
Power Source	Built-in rechargeable battery
Care & Cleaning	Clean with a dry cloth; avoid prolonged water exposure beyond IPX6 rating
Safety	Keep away from heat sources, do not disassemble, use original charger
Included Accessories	USB-C charging cable, 3.5mm AUX cable, user manual

Frequently Asked Questions - SoundJam1 Lamax

How do I pair the speaker with my phone?

Turn on the speaker by holding down the POWER button. It will automatically enter pairing mode. On your phone, enable Bluetooth and select 'LAMAX SoundJam1' from the list.

How do I use the TWS function to pair two speakers?

Turn on both speakers and ensure they are not connected to any device. Press the PAIR button on the speaker you want as the main unit. Then pair the main speaker with your phone via Bluetooth. The main speaker will be the left channel.

How do I charge the speaker?

Use the original USB-C cable provided. Connect it to a USB power adapter. The speaker fully charges in about 2.5 hours. For first use, fully charge before using.

How long does the battery last?

Playback time is up to 20 hours at 50% volume. Actual battery life may vary depending on volume level and usage.

Can I use the speaker as a power bank?

Yes, connect an external device via the USB-A port. Charging will start automatically. Note: maximum charging time per connection is 30 minutes.

What does IPX6 mean?

IPX6 means the speaker is protected against powerful water jets. It can withstand splashes and rain, but should not be submerged.

How do I switch between music sources?

Press and hold the M button for 2 seconds to cycle between Bluetooth, micro SD card, USB flash drive, and AUX. Inserting a micro SD or USB will automatically switch to that mode.

How do I reset the speaker?

Hold down the POWER button for 8 seconds to reset the speaker.

What audio codecs does the speaker support?

The speaker supports the SBC codec. It also supports file formats MP3, WAV, and FLAC.

How do I answer or reject a call?

Press the ▶ button to answer or end a call. Hold it for 2 seconds to reject an incoming call. Double tap to dial the last number.

USER MANUAL SoundJam1 Lamax

1 +	Volume up (press)Next track (hold for 2 seconds)
2 —	Volume down (press)Previous track (hold for 2 seconds)
3 PAIRING/TWS	TWS mode on/off (press)Pairing (hold for 2 seconds)
4 POWER	On/Off (hold for 2 seconds)Switch equalizer to normal/bass boost (press)Reset (hold for 8 seconds)
5 ▶	Play/pause (press)Answer/end call (press)Reject call (hold for 2 seconds)Dial last phone number (double tap)Switch voice assistant on/off (hold for 2 seconds)Cancel TWS pairing (hold for 8 seconds)
6 MODE (M)	Switching light modes (press)Switch music sources - Bluetooth, micro SD card, USB flash drive and AUX (2 seconds hold)

Others

7	Slot for micro SD card
8	USB-C charging port
9	USB-A port
10	AUX port

SPEAKER CONTROL

Charging:

Fully charge the speaker battery before using it for the first time.

Charge the speaker with the original power cable provided.

On / Off:

Turn on the speaker by holding down the POWER button. Press and hold the same button to turn off the speaker.

Note: The speaker will automatically turn off after 30 minutes of inactivity; when the battery is very low; when charging an external device takes 30 minutes.

Pairing:

1. Turn on the speaker by holding down the POWER button. The speaker will automatically enter pairing mode.

2. Activate the Bluetooth function on your phone or other device. Select „LAMAX SoundJam1“ from the list of available devices.

TWS:

1. To pair two speakers with each other, turn on both speakers and make sure they are not paired with a multimedia device.

2. Press the PAIR button on one of the speakers that you select as the main speaker, an audio signal will sound.

3. Then pair the main speaker with the multimedia device as described in the Pairing section.

4. The main speaker will function as the left channel. Only through this main speaker can you control the functions for calls.

5. To unpair the speakers, press the PAIR button on the main speaker.

6. To cancel TWS pairing, hold down the ▶ button for 8 seconds.

Switch music sources:

Press the M button to switch between sources:

- Bluetooth

- Micro SD card

- USB flash drive

- AUX

Note: Connecting a micro SD card, USB flash drive or the included 3.5mm audio cable will automatically switch the speaker to the appropriate mode.

Charging an external device (power bank):

The speaker can be used as a power bank. If you connect an external device via the USB-A port, charging will start automatically. The maximum charging time is 30 minutes after each connection.

PARAMETERS

Maximum power	40 W
Wireless technology	Bluetooth 5.3
Number of bands	2
Maximum pairing distance	15 m
Supported formats	MP3, WAV, FLAC
Supported codecs	SBC
Inputs	Micro SD, USB-A, AUX
Battery capacity	1800 mAh
Playback time (50% volume)	up to 20 h
Charging time	up to 2.5 h
Waterproof	IPX6
Sensitivity	≥ 101 dB
Frequency range	20 Hz – 20 kHz
Features	LED backlight, TWS
Dimensions	100 × 100 × 232 mm
Weight	1,2 kg

Printing errors reserved.

LAMAX

SoundJam1

VERPACKUNGSINHALT

1× LAMAX SoundJam1

1× USB-C Stromkabel

1× Benutzerhandbuch