Sliss KR350 - Sander Eldom - Free user manual and instructions

Product Type	Electric Food Slicer
Brand	Eldom
Model	Sliss KR350
Power	150 W
Supply Voltage	230 V ~ 50 Hz
Max Continuous Operation	10 minutes
Required Pause Before Restart	30 minutes
Slice Thickness Range	1 – 15 mm
Max Product Dimensions	110 x 110 x 90 mm (length x width x thickness)
Speed Settings	2 speeds (I and II)
Blade Type	Stainless steel, detachable
Included Accessories	Carriage, guard, slice thickness regulator
Intended Use	Household only; slicing bread, cured meat, meat, cheese, vegetables, fruit
Cleaning Method	Body: damp cloth; Blade and guard: warm water with brush
Safety Features	Guard, carriage, automatic stop on overload? (see manual), child safety warnings
Storage	Set thickness knob to '0' to align guide with blade
Warranty	Valid for household use only; improper use voids warranty
Consumables	Blade (cutter) not covered by warranty

Frequently Asked Questions - Sliss KR350 Eldom

How do I adjust the slice thickness?

Turn the slice thickness regulator (knob 8) on the side of the slicer. Turning it left results in thinner slices, turning right produces thicker slices. The range is from 1 mm to 15 mm.

Can I slice frozen meat?

For thin slices, cool the meat thoroughly for 2 to 4 hours before slicing. For products with uneven texture (like fish), freeze for 2 to 4 hours before slicing. Ensure the meat is boneless.

How do I clean the blade safely?

First, unplug the appliance and wait for the blade to stop. Detach the blade by following the steps in figures 2-3 of the manual. Wash the blade in warm water with washing liquid using a brush, rinse under running water, and wipe dry. Be extremely careful as the blade is very sharp. Do not clean with bare hands; use a brush.

What is the maximum continuous operation time?

The allowed uninterrupted operation is 10 minutes. After that, you must switch off the appliance and wait at least 30 minutes before using it again. Exceeding this time may damage the appliance and void the warranty.

Can I slice fresh bread?

The slicer is not intended for slicing fresh bread. To slice bread, first cool it down.

What should I do if the machine stops during use?

If the appliance stops, it may have exceeded the maximum operation time or experienced an overload. Immediately unplug it, wait for the blade to stop, and let it rest for at least 30 minutes before restarting. If the problem persists, consult an authorized service center.

How should I store the slicer?

After use, set the slice thickness knob to '0'. This aligns the guide with the blade, protecting the blade during storage. Always unplug the appliance and clean it before storing.

Is the blade removable?

Yes, the blade can be dismantled for cleaning. Refer to figures 2 and 3 in the manual for instructions on how to remove it safely.

What should I do if the power cord is damaged?

If the supply cord is damaged, do not use the appliance. Contact the producer's authorized service centre for repair. The list of service centres is available in the appendix or on www.eldom.eu.

Can I use this slicer for commercial purposes?

No, this appliance is designed for household use only. Professional or other than intended use will nullify the guarantee and may be unsafe.

USER MANUAL Sliss KR350 Eldom

Exterior view of a modern eldom solar water heater with a circular disc and blade assembly (no text or symbols visible)

1. Please acquaint precisely with whole of this instruction before
2. using the blender for the first time.
3. The power cable must be plugged in the socket with parameters the same as those given in that instruction manual.

4. Do not immerse the cable or the appliance in water.

5. Do not use the appliance outdoors.

6. The appliance is not meant to be used via an external clock or a separate remote control system.

7. Before switching the appliance on, make sure that all of its elements are appropriately assembled.

8. Do not leave your device without supervision.

9. Always unplug the appliance after operation.

10. The device can be used by children aged 8 and older and by persons with limited physical, sensory or mental capabilities, or persons without sufficient experience and knowledge only under supervision or if previously instructed on the safe use of the appliance and the possible risks. Children shall not play with the appliance. Cleaning and maintenance that are the responsibility of the user shall not be carried out by children without supervision. Protect the appliance and the power cord against children under 8 years old.

11. Do not touch the appliance with wet hands.

12. Always pull the plug of the socket before cleaning.
13. Do not exceed the maximum time of continuous operation of the appliance.

14. The slicer must be used with the carriage and the guard, unless it is impossible due to the size and shape of the sliced product.

15. NOTE. Avoid contact with moving parts. Improper use of the appliance may result in injury. Be careful when operating the blade and during cleaning.

16. Do not overload the appliance with excess quantity of the sliced product or its strong pressing (with the guard).

17. Do not remove the remains on the blade when the appliance is on.

18. Do not move during use.
19. Never use the appliance if the supply cord is damaged. If found dama ged in any way, consult the producer's authorized service centre. The list of service centres is to be found in the appendix and on www.eldom.eu.
20. The appliance can be used only with the originally included accessories.
21. Refer servicing to an authorized service centre. Modifying the appliance or using spare parts or elements other than the original ones is forbidden and can expose the user to hazard.

WARNING

Plastic bag can be dangerous, to avoid danger of suffocation keep this bag away from babies and children.

Only intended for household use.

GENERAL DESCRIPTION

1. Switch - I + II speeds
2. Blade
3. Base
4. Carriage
5. Guard
6. Body
7. Guide
8. Slice thickness regulator

TECHNICAL DATA

• power: 150W
• supply voltage: 230V \~ 50Hz
• allowed uninterrupted operation: 10 minutes
• pause before restarting operation: 30 minutes
• therange:1–15 mm

INTENDED USE

The KR350 slicer is designed to slice various types of hard food products, in particular bread, cured meat, meat, cheese, vegetables, fruit, etc.

HOW TO USE

Before the first use:

• read thoroughly this guidebook.
• Make sure that all elements are free of damages.
• Wash the elements that come into contact with food.

OPERATION

• Place the body (6) on flat, hard and stable ground.
• Make sure that the appliance is disconnected from the mains and the switch (1) is set in the "O" position.
• Move the carriage (4) several times back and forth to make sure that it moves freely.
• Place food products on the carriage (4). In case of slicing small bits, pit the guard (5) on the carriage (4).
• Maximum dimensions of the product to be sliced: 110x110x90 mm (length x width x thickness).
• Select the required slicing thickness with the adjustment knob (8): turning left results in thinner slices, turning right produces thicker slices.
• Connect the appliance to the network compliant with the parameters stated on the device and start it with the switch (1).

• When the blade starts spinning, push the carriage (4) with the product towards the blade, and then slide it back and forth. Press the product gently to the guide.

• Do not exceed the maximum duration of continuous operation of the appliance. If this time is exceeded, immediately switch off the appliance and wait at least 30 minutes before its next use.

• Exceeding the maximum time of work may result in damaging of the appliance and loss of the warranty.
• After the slicing, disconnect the appliance.
• To ensure safety and protect the blade during storage, set the slicing thickness knob (8) to "0" to align the guide (7) with the blade.

RECOMMENDATIONS

The slicer is not intended for slicing fresh bread. To slice fresh bread, first cool it down.

• To slice meat in thin slices, cool it down thoroughly for 2 to 4 hours before the slicing. Meat must be without bone.
• Products with uneven, fish-like texture are often difficult to slice, so they need to be frozen for 2 to 4 hours before slicing.
• If warm roast meat is to be sliced, it has to be taken out of the oven at least 15 to 20 minutes before slicing.
• The size of the roast meat should be appropriate for the appliance; all threads (strings) should be removed.
• Slicing may be used for various vegetables and fruit just before serving. Seeds should be removed from the products.

The cutters are consumables and are not covered by the warranty. Crusher cutter (2) must not be cleaned with bare hands. Use a small brush for cleaning.

CLEANING AND MAINTENANCE

• Clean the appliance right after its use.
• Before cleaning, switch off the appliance, remove the plug from the socket and wait for the blade (2) to stop rotating.
• Clean the body of the unit, the guide (7) and the carriage (4) with moist cloth. Never immerse the body in water and do not rinse it under running water.
• Do not use abrasive agents, cleaning powders, acetone, alcohol, etc.
• The blade (2) may be dismantled: fig. 2-3.
• Wash the blade (2) and the guard (5) in warm water with addition of washing liquid, using a brush, rinse under running water, and wipe dry.
• Be extremely careful when washing the blade (2), as it is very sharp.

ENVIRONMENTAL PROTECTION

• The appliance is made of materials which can be recycled.
• It should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

WARRANTY

• This appliance is designed for domestic use only.
• It cannot be used for professional purposes or for other than the intended use.
• Improper use will nullify the guarantee.

DOPORUČENÍ PRO OBLAST BEZPEČNOSTI

URČENÍ

BESTIMMUNG

URČENIE