SFH 8011 - Household Fan SENCOR - Free user manual and instructions

Product Type	Fan heater with ceramic heating element
Brand	Sencor
Model	SFH 8011
Heating Element	Ceramic
Power Settings	2 heat levels + fan only
Thermostat	Adjustable rotary thermostat
Fan Speeds	2 speeds
Oscillation	Yes, wide-angle oscillation
Safety Features	Overheat protection, tip-over switch
Power Supply	220-240 V ~ 50 Hz
Power Consumption	2000 W (max)
Dimensions (HxWxD)	Approx. 25 x 20 x 18 cm
Weight	Approx. 2.0 kg
Cord Length	Approx. 1.5 m
Material	High-quality plastic
Color	White/black
Protection Class	Class II
Control Type	Rotary switches
Application	Indoor domestic use
Certifications	CE, RoHS
Noise Level	Approx. 45 dB (low speed)

Frequently Asked Questions - SFH 8011 SENCOR

How to clean the Sencor SFH 8011 fan heater?

Always unplug the device and let it cool completely. Use a soft dry cloth to wipe the exterior. Do not use water or abrasive cleaners. For the grille, use a vacuum cleaner with a brush attachment to remove dust.

How do I set the thermostat on this heater?

Turn the rotary thermostat knob clockwise to increase the desired temperature. The heater will automatically turn off when the room reaches the set temperature and turn on again when it drops.

Does the SFH 8011 have an oscillation function?

Yes, the fan heater features a wide-angle oscillation function to distribute heat more evenly. You can enable or disable it using the oscillation button or switch.

Is it safe to leave the fan heater unattended?

While the heater has built-in safety features like overheat protection and a tip-over switch, it is recommended not to leave it unattended for long periods. Always place it on a stable, flat surface away from flammable materials.

What is the power consumption of the Sencor SFH 8011?

The maximum power consumption is 2000 W on high heat setting. On low heat it consumes approximately 1000 W, and in fan-only mode it uses about 50 W.

How can I adjust the fan speed?

Use the rotary switch to select between fan-only, low heat, or high heat. The fan speed automatically adjusts according to the selected mode: lower speed on low heat, higher on high heat.

Why does my heater turn off unexpectedly?

This is likely due to the overheat protection feature. The heater will shut off if it gets too hot or if the air intake is blocked. Ensure there is at least 50 cm of clearance around the heater. Wait a few minutes for it to cool and then restart.

Can I use the SFH 8011 in a bathroom or humid area?

No, this heater is designed for indoor dry areas only. It does not have moisture protection (IP rating). Using it in a bathroom or similar humid environment may cause electric shock or damage.

How do I replace the fuse or power cord?

This heater has a non-rewireable plug. If the fuse or cord is damaged, the entire cord set must be replaced by a qualified technician. Do not attempt to open the unit yourself.

Does the heater come with a remote control?

No, the Sencor SFH 8011 is controlled manually via rotary knobs on the unit. There is no remote control included.

USER MANUAL SFH 8011 SENCOR

TEPLOVZDUŠNÝ VENTILÁTOR S KERAMICKÝM TOPNÝM ČLÁNKEM NÁVOD K POUŽITÍ

3D rendering of a black spherical device with a circular perforated grille (no text or symbols visible)

SENCOR®

SFH 8011

① Otočný termostat

② Otočný přepínač