12FS - Computer Cooling Component Evolveo - Free user manual and instructions
Find the device manual for free 12FS Evolveo in PDF.
| Product Type | Computer Cooling Component (Case Fan) |
| Brand | Evolveo |
| Model | 12FS |
| Fan Size | 120 mm |
| Bearing Type | Sleeve Bearing |
| Rated Voltage | 12 V DC |
| Rated Current | 0.15 A |
| Power Draw | 1.8 W |
| Fan Speed | 1200 ± 10% RPM |
| Airflow | 45 CFM |
| Noise Level | 25 dBA |
| Connector | 3-Pin |
| Dimensions (W x H x D) | 120 x 120 x 25 mm |
| Weight | 110 g |
| Material | Plastic Frame, Metal Hub |
| Color | Black |
| LED Lighting | None |
| Intended Use | Case Exhaust or Intake |
| Compatible Systems | Standard PC Cases with 120 mm Fan Mounts |
| Installation | Screw Mounting |
| Included Accessories | 4 Screws, Manual |
| Maintenance | Periodic Dust Removal with Compressed Air |
| Safety | Do Not Expose to Liquids; Disconnect Power Before Cleaning |
| Spare Parts Availability | Contact Manufacturer for Replacement Fans |
| Warranty | 2 Years (Check Retailer) |
Frequently Asked Questions - 12FS Evolveo
User questions about 12FS Evolveo
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Computer Cooling Component in PDF format for free! Find your manual 12FS - Evolveo and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 12FS by Evolveo.
USER MANUAL 12FS Evolveo
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoEU
ARGB LED rainbow fans with LEDs. The advantage of these fans is that no controller is needed to control the LED lighting. A slave fan is connected to the master fan. The master connects to the motherboard or to the RESET/LED button.
The fans allow all seven colours of the rainbow spectrum to be displayed at once. The master fans are labeled 12FM (black frame) and 12FMW (white frame) and have molex connectors, ARGB 3-pin 5V connector for connection to the motherboard and a connector for connection to the RESET/LED button on the front or top of the case. Slave fans are labeled 12FS (black frame) and 12FSW (white frame) and have a single molex connector.
EN
The LED lighting of the fans is controlled in two ways:
- Press the RESET/LED button located on the PC control panel, or
- Using an third party software (ASRock RGB LED, ASUS AURA Sync, ...) and ARGB cable connected to the motherboard. For this mode, the RESET/LED button must be pressed for 5 SECONDS
Specifications:
- ARGB cable for connecting the fan to the motherboard - master fan
- bearing: sleeve bearing
- speed: max 1100 RPM
• Air flow: max 39 CFM - Noise level 20.5 dB
• dimension: 120 x 120 x 26mm
The crossed-out container symbol on the product, in literature or on the packaging means that in the EU all electrical and electronic equipment, batteries and accumulators must be placed in the separate waste stream at the end of their useful life. Do not dispose of these products in unsorted municipal waste.
①CE
DECLARATION OF CONFORMITY
Abacus Electric, s.r.o. hereby declares that the EVOLVEO 12FM, 12FS, 12FMW, 12FSW comply with the requirements of the standards and regulations applicable to this type of device. The full text of the Declaration of Conformity can be found at https://ftp.evolveo.com/CE/
Importer / Producer - Importer / Producer
Planá 2, 370 01, Czech Republic
Copyright © Abacus Electric, s.r.o.
www.evolveo.com
www.facebook.com/EvolveoEU
All rights reserved.
Design and specifications are subject to change without notice
EN