Si1+ - Uncategorized SOUNDCRAFT - Free user manual and instructions
Find the device manual for free Si1+ SOUNDCRAFT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Mixing Console |
| Brand | Soundcraft |
| Model | Si1+ |
| Input Channels | 64 mono (48 local + 16 via expansion) |
| Output Buses | 28 mix buses (8 matrix, 8 groups, 12 aux) |
| Faders | 24 motorized faders |
| Touchscreen | 9-inch color touchscreen |
| Built-in Effects | 4 stereo effects engines (Lexicon) |
| Dimensions (W x D x H) | 890 x 520 x 210 mm |
| Weight | 22 kg |
| Power Consumption | 150 W |
| Power Supply | Internal switching PSU (100-240 V AC) |
| Connectivity | Ethernet, USB, MADI (optional) |
| Sample Rate | 48 kHz / 96 kHz |
| Bit Depth | 24-bit |
| Main Features | Recallable preamps, 4-band EQ on all channels, dynamic processing, scene management |
| Cleaning Instructions | Wipe with dry soft cloth; avoid liquids and solvents |
| Safety Warnings | Do not expose to moisture; use only provided power cord |
| Spare Parts Availability | Contact Soundcraft authorized service centers |
| Warranty | 2 years (depending on region) |
Frequently Asked Questions - Si1+ SOUNDCRAFT
How do I reset the Soundcraft Si1+ to factory defaults?
Go to Setup > System > Factory Reset. Confirm by pressing the OK button. Note that all user data will be lost.
Can I expand the number of input channels on the Si1+?
Yes, the Si1+ supports optional MADI or Dante expansion cards to increase input count beyond the 48 local inputs.
How to save a show file on the Si1+?
Insert a USB drive into the USB port, then press Setup > Show Save. Select the destination and name the file.
Why is there no sound from the main outputs?
Check that Main Mix fader is up, the Mute button is off, and the output routing is correct (Setup > Audio I/O). Also verify signal presence on the input channels.
How to assign an input to a channel on the Si1+?
Press Patch on the channel strip, then select the physical input source (e.g., Mic/Line 1). Use the touchscreen or Select knob to confirm.
Can I control the Si1+ wirelessly?
Yes, via the Soundcraft HiQnet tablet app. Connect the console to the same network and enable remote control in Setup > Network.
How to update the firmware on the Si1+?
Download the latest firmware from Soundcraft website to a USB drive. Insert the drive, go to Setup > System > Update, and follow on-screen instructions.
What is the maximum number of simultaneous effects?
The Si1+ has four stereo effects engines that can run simultaneously, each with selectable algorithms (reverb, delay, chorus, etc.).
How to adjust the talkback microphone?
Enable talkback by pressing the Talkback button. Adjust its level using the Talkback Level pot on the rear panel or in Setup > Utility > Talkback.
The touchscreen is unresponsive – what can I do?
First, try a soft reset (hold power button for 5 seconds). If that fails, perform a factory reset. If problem persists, contact Soundcraft support for hardware service.
User questions about Si1+ SOUNDCRAFT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Si1+ - SOUNDCRAFT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Si1+ by SOUNDCRAFT.