Spirit Monitor - Mixing console SOUNDCRAFT - Free user manual and instructions
Find the device manual for free Spirit Monitor SOUNDCRAFT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Monitor Mixing Console |
| Number of Channels | 8 mono input channels |
| Stereo Inputs | 2 stereo returns |
| Outputs | 4 aux sends, L/R main output, 2 monitor outputs |
| Frequency Response | 20 Hz - 20 kHz (±1 dB) |
| Total Harmonic Distortion | <0.01% @ 1 kHz, +14 dBu |
| EQ Section | 3-band EQ with swept mid on each mono channel |
| Phantom Power | +48 V DC switchable per channel (4 channels) |
| Dimensions (W x D x H) | 445 mm x 350 mm x 145 mm |
| Weight | 10.5 kg |
| Power Supply | AC 100-240 V, 50/60 Hz, 40 W |
| Construction | Steel chassis with aluminum front panel |
| Cooling | Passive ventilation, no fan |
| Operating Temperature | 0°C to 40°C |
| Cleaning | Use dry soft cloth; avoid liquids and abrasives |
| Repairability | Modular design; replaceable channel modules and power supply |
| Safety Certifications | CE, UL, RoHS compliant |
Frequently Asked Questions - Spirit Monitor SOUNDCRAFT
How do I connect microphones to the Spirit Monitor?
Use XLR cables to connect microphones to the mono input channels. Ensure phantom power (+48V) is enabled on channels that require it, such as condenser microphones.
What is the difference between the main output and monitor outputs?
The main output is typically used for front-of-house (FOH) sound, while monitor outputs feed stage monitors for performers. The console is designed for monitor mixing, so the monitor outputs are emphasized.
Can I use the Spirit Monitor for recording?
Yes, you can use the main output or aux sends to connect to an audio interface. The console provides clean preamps suitable for recording.
How do I clean the console?
Disconnect power, then wipe the surface with a dry, soft cloth. Do not use water, solvents, or abrasive cleaners. For stubborn dirt, slightly dampen the cloth with mild soap and water, then dry immediately.
What type of power supply does the Spirit Monitor use?
The console has an internal power supply that accepts AC voltage from 100-240 V, 50/60 Hz. Use the detachable IEC power cord. Do not attempt to replace the internal fuse yourself; consult a qualified technician.
How do I set up a monitor mix?
Use the auxiliary sends (aux 1-4) to create separate monitor mixes. Each aux send can be assigned to a different monitor speaker. Use the aux send knobs on each channel to adjust the level for that mix.
Why is there no sound coming from my speakers?
Check that the console is powered on, the master volume is up, and the mute/solo buttons are not engaged. Ensure cables are properly connected and speakers are on. Also check the input channel's gain and fader levels.
Can I use with powered speakers?
Yes, connect powered speakers to the main output or monitor outputs using balanced TRS or XLR cables. The outputs are line level, suitable for powered speakers.
How do I replace a blown fuse?
The fuse is located inside the power inlet module. Disconnect the power cord, then use a small screwdriver to open the fuse drawer. Replace with the same type and rating (e.g., T1A/250V). If it blows again, consult a technician.
Where can I find spare parts?
Contact Soundcraft authorized service centers or distributors. Some parts like knobs, faders, and channel modules are available as spare parts. Refer to the service manual for part numbers.
User questions about Spirit Monitor SOUNDCRAFT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Mixing console in PDF format for free! Find your manual Spirit Monitor - SOUNDCRAFT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Spirit Monitor by SOUNDCRAFT.