VZW801 - Drill Vulcan - Free user manual and instructions
Find the device manual for free VZW801 Vulcan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Drill |
| Brand | Vulcan |
| Model | VZW801 |
| Power Supply | 230 V, 50 Hz AC |
| Power Consumption | 800 W |
| No-Load Speed | 0 – 3000 rpm (variable) |
| Max Drilling Capacity (Steel) | 10 mm |
| Max Drilling Capacity (Wood) | 25 mm |
| Chuck Type | Keyless, 13 mm |
| Reverse Function | Yes |
| Variable Speed Trigger | Yes |
| Lock-On Button | Yes |
| Dimensions (L x W x H) | 280 x 200 x 80 mm |
| Weight | 1.5 kg |
| Safety Features | Double insulation, safety trigger lock |
| Maintenance | Clean with dry cloth; periodically check carbon brushes |
| Spare Parts Availability | Through Vulcan authorized service centers |
| Warranty | 2 years |
Frequently Asked Questions - VZW801 Vulcan
How do I change the drill bit?
Ensure the drill is unplugged. Open the keyless chuck by turning it counterclockwise, insert the bit, and tighten clockwise by hand.
Can I use this drill for masonry?
The VZW801 is designed for wood and steel. For masonry, use a hammer drill or a masonry bit with reduced speed, but it may not perform optimally.
What is the maximum drilling depth?
The maximum depth depends on the bit length and material. Typically, you can drill up to the bit's length, but avoid exceeding the chuck capacity.
How do I reverse the drill?
Slide the direction switch located near the trigger to the left for reverse (unscrewing) or right for forward (drilling). Make sure the drill is stopped before switching.
Why does the drill stop suddenly?
This may be due to overheating or overload. Let the drill cool down for 15 minutes. If it persists, check the carbon brushes or contact Vulcan service.
How do I maintain the drill?
Keep the ventilation slots clear, wipe the exterior with a dry cloth, and periodically inspect the power cord and carbon brushes. Replace brushes when worn below 5 mm.
Can I use an extension cord?
Yes, but ensure it is rated for at least 10 A and fully unwound to avoid overheating. Use a cord suitable for outdoor use if working outside.
Is the drill double insulated?
Yes, the VZW801 features double insulation, so no grounding is required. Always use the drill with intact insulation.
What should I do if the chuck wobbles?
Check if the bit is properly seated or if the chuck is loose. Tighten the chuck by hand. If wobbling persists, the chuck may need replacement; contact Vulcan support.
Where can I find the manual?
The manual is available for free download on notice-facile.com for the Vulcan VZW801. You can also request a translated version by email.
User questions about VZW801 Vulcan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual VZW801 - Vulcan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VZW801 by Vulcan.