JPV 900 - Pump Elpumps - Free user manual and instructions
Find the device manual for free JPV 900 Elpumps in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Submersible Pump |
| Brand | Elpumps |
| Model | JPV 900 |
| Power Consumption | 900 W |
| Voltage / Frequency | 230 V ~ 50 Hz |
| Max Flow Rate | 6,000 L/h |
| Max Head | 8 m |
| Max Immersion Depth | 7 m |
| Cable Length | 10 m |
| Outlet Diameter | 1" (25 mm) |
| Weight | 5.5 kg |
| Dimensions (L x W x H) | 200 x 150 x 300 mm |
| Material | Stainless steel / Plastic |
| Protection Class | IPX8 |
| Main Functions | Water transfer, drainage, garden irrigation |
| Safety Features | Thermal overload protection, float switch |
| Maintenance | Clean filter regularly; rinse after use |
| Repairability | Replaceable power cord, motor carbon brushes |
| Included Accessories | Connection hose adapter, manual |
Frequently Asked Questions - JPV 900 Elpumps
How to install the pump?
Place the pump on a stable, flat surface in the water. Ensure the float switch can move freely. Connect the outlet hose to the 1' adapter. Plug into a grounded outlet.
Can I use the pump for dirty water?
Yes, the JPV 900 can handle water with particles up to 5 mm in size. Avoid large debris to prevent clogging.
What is the maximum pumping depth?
The pump can be submerged up to 7 meters below the water surface. The max head (vertical lift) is 8 meters.
How to clean the pump?
Disconnect power. Remove the front cover and rinse the impeller and filter with clean water. Use a soft brush if needed. Reassemble after drying.
Why does the pump not start?
Check if the float switch is stuck or if the pump is not submerged enough. Ensure the power cord is plugged in and the thermal overload hasn't tripped. Let it cool if overheated.
What does the float switch do?
The float switch automatically turns the pump on when water reaches a certain level and off when the level drops, preventing dry running.
Can I use an extension cord?
Yes, but use a heavy-duty cord rated for outdoor use with a minimum gauge of 1.5 mm². Keep the cord length as short as possible to avoid voltage drop.
What voltage and frequency does the pump require?
The pump operates on 230 V ~ 50 Hz AC power. Ensure your electrical supply matches these specifications.
How to winterize the pump?
After the season, drain all water from the pump and hoses. Store in a dry, frost-free place. Run the pump briefly in clean water to remove residues.
Is the pump fully submersible?
Yes, the Elpumps JPV 900 has IPX8 protection, meaning it can be permanently submerged up to the specified depth without damage.
User questions about JPV 900 Elpumps
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual JPV 900 - Elpumps and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JPV 900 by Elpumps.
