IR16 - Motion detector Elektrobock - Free user manual and instructions
Find the device manual for free IR16 Elektrobock in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Elektrobock |
| Model | IR16 |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | 12 meters (max) |
| Detection Angle | 120 degrees |
| Power Supply | 9V DC battery or 12-24V DC |
| Dimensions (H x W x D) | 100 x 60 x 40 mm |
| Weight | 0.1 kg |
| Mounting Type | Wall or ceiling mount |
| Indoor/Outdoor | Indoor use only |
| Operating Temperature | -10°C to 40°C |
| Main Functions | Motion detection, automatic light control |
| Sensitivity Adjustment | Yes (via potentiometer) |
| Time Delay Adjustment | Yes (5 seconds to 10 minutes) |
| Installation | Simple DIY installation |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Safety Precautions | Keep away from water and heat sources |
| Repairability | Replace battery or sensor |
| Included Accessories | Mounting screws and brackets |
Frequently Asked Questions - IR16 Elektrobock
How do I install the motion detector?
Mount the device on a wall or ceiling at a height of 2-2.5 meters. Connect the power supply as per the diagram. Adjust the direction for optimal coverage.
What type of battery does it use?
It uses a standard 9V alkaline battery. Alternatively, you can use a 12-24V DC power supply.
How far can the sensor detect movement?
The detection range is up to 12 meters in front of the sensor, with a 120-degree angle.
Can I use it outdoors?
No, this model is designed for indoor use only. Exposure to rain or moisture may damage it.
How do I adjust the sensitivity?
Locate the sensitivity potentiometer on the device. Turn it clockwise to increase sensitivity and counterclockwise to decrease.
How long does the battery last?
Battery life depends on usage frequency, but typically lasts 6-12 months under normal conditions.
What is the time delay adjustment?
The time delay determines how long the light stays on after motion stops. It can be set from 5 seconds to 10 minutes via the potentiometer.
Why does the detector give false alarms?
False alarms can be caused by pets, temperature changes, or incorrect placement. Reduce sensitivity or reposition the sensor away from heat sources.
How do I clean the sensor?
Use a soft, dry cloth to gently wipe the lens and housing. Avoid using water or cleaning agents to prevent damage.
Is the device repairable?
Yes, the battery and sensor can be replaced. For other repairs, contact a qualified technician or the manufacturer.
User questions about IR16 Elektrobock
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual IR16 - Elektrobock and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IR16 by Elektrobock.
USER MANUAL IR16 Elektrobock
Funkce:
Table of contents
Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Elektrobock
Model : IR16
Category : Motion detector