IM410 - Air mattress BLAUPUNKT - Free user manual and instructions

Product Type	Air mattress
Brand	Blaupunkt
Model	IM410
Dimensions (approx.)	190 x 60 x 20 cm
Weight (approx.)	2.5 kg
Material	PVC (vinyl)
Inflation Method	Built-in foot pump or hand pump (not included)
Deflation	Open valves, fold and press to release air
Valve Type	Top valve with plug and nut, side valve for foot pump
Repair Kit	Self-adhesive patches (not included, available separately)
Safety Features	Not for children under 18 months; keep away from heat, sharp objects, and water; no smoking or jumping
Usage	Indoor sleeping, camping, guest bedding
Care Instructions	Clean with damp cloth, store dry in a cool place
Storage	Deflate, fold, and store in a dry place
Manufacturer	Everpol, Warsaw, Poland
Contact	[e-mail], [phone]
Warranty	Standard manufacturer warranty (check manual for details)
Recommended Users	Adults, single occupancy

Frequently Asked Questions - IM410 BLAUPUNKT

How do I inflate the Blaupunkt IM410 air mattress?

You can inflate it using the built-in foot pump or a hand pump (not included). For the foot pump, plug the side valve, unscrew the top valve nut, remove the rubber plug, and press the pump spring repeatedly. Once firm, plug the valve and tighten the nut. For a hand pump, open the main valve, connect the pump, inflate, then disconnect and plug the valve.

Can I use a hair dryer to inflate the mattress?

No, do not use a hair dryer. The manual explicitly warns against using hot air devices as they may damage or melt the mattress.

Is the air mattress safe for children?

The mattress is not suitable for infants under 18 months due to suffocation risk. It is also not a toy; children should not play on or near it without adult supervision.

Can I use the mattress as a flotation device in water?

No, the mattress is not a life-saving item. It is not designed for water use and should never be used as a floating toy or raft.

How do I repair a leak in the mattress?

Inflate the mattress, listen for air escaping or apply soapy water to suspected areas to see bubbles. Deflate, clean and degrease the area, then apply a self-adhesive patch (not included). Smooth it out and place a heavy object on it for 24 hours to dry.

How should I store the mattress when not in use?

Open the valves to release all air, gently fold the mattress by pressing it, and store it in a dry place away from heat and sharp objects.

What if the mattress feels too soft?

Air pressure varies with temperature. If the mattress is too soft, simply inflate it more using the foot pump or a hand pump until it is firm enough.

Can I jump or stand on the mattress?

No, do not stand, walk, or jump on the mattress. This can cause injury or damage the mattress. Avoid sleeping on the edges.

What should I avoid placing near the mattress?

Keep the mattress away from fire, heaters, sharp objects, and pets. Ensure the surface underneath is free of debris to prevent punctures.

Where can I get support or replacement parts?

For questions or problems, contact the manufacturer Everpol at [phone] or email [e-mail]. The main contact is [e-mail].

USER MANUAL IM410 BLAUPUNKT

• Read the instructions before using the mattress.
• Suffocation risk: do not put babies under 18 months old on the mattress.
  • The mattress is not a toy, do not let children play with the mattress.
• Keep the mattress away from fire, heaters and other hot objects and heat sources. The mattress may melt or catch fire.
• Do not use a hair dryer to inflate the mattress.
• Do not smoke while using the mattress.
• The mattress is not a life-saving item. It is not intended for use in water and is not a water or floating toy.
• Do not stand or walk on the mattress. Do not jump on the mattress (risk of falling or damaging the mattress).
• Keep the mattress away from sharp objects. Make sure there are no sharp objects on the surface where the mattress will be placed. Do not move the mattress by rubbing against surfaces. It should be moved by shifting.
• Keep pets away from the mattress.
• The air pressure in the mattress may vary depending on the ambient temperature. If the mattress is too soft, inflate it.
• Avoid sleeping on the edge of the mattress.
• Keep the valves free of debris.

PREPARING THE MATTRESS

Unroll the mattress and lay it on a clean flat surface.

To inflate the mattress with air, you can use the foot pump built into the mattress, or you can use a hand pump (not included). To inflate the mattress with air using the hand pump, open the valve, connect the pump and inflate it. When the mattress is firm enough, disconnect the pump, plug the valve. When the mattress is firm enough, disconnect the pump, plug the valve.

To use the foot pump, plug the side valve. Unscrew the top valve nut, remove the rubber plug. Pressing the pump spring repeatedly, inflate the mattress with air. Plug the valve with the plug and tighten the nut.

STORING THE MATTRESS

After use, drain the air from the mattress. To do this, open the valves, and gently fold the mattress by pressing it.

Store the folded mattress in a dry place.

REPAIRING A MATTRESS LEAK

If a mattress leak is found, inflate the mattress. Locate the suspected location of the air leak by listening. Gently moisten the suspected area with soapy water. At the location of the air leak, bubbles would appear.

Empty the mattress of air, clean and degrease the area around the leak well. Apply an appropriately sized patch at the air leak site. Smooth it out. Leave the patch pinched with a heavier object for 24 hours to dry.

WAZNE INFORMACJE

02-801 Warsaw, Poland

phone:[phone]

e-mail: [e-mail]

www.blaupunkt.com

In case of questions or problems please contact our service.

Tel. [phone]

Email: [e-mail]

Enjoy it.

All rights reserved. All brand names are registered trademarks of their respective owners. Specifications are subject to change without prior notice.