PD 114 XE - Dishwasher Philco - Free user manual and instructions
Find the device manual for free PD 114 XE Philco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Brand | Philco |
| Model | PD 114 XE |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | Approx. 50 kg |
| Power Supply | 220-240 V, 50 Hz |
| Energy Consumption per Cycle | 0.95 kWh (Eco program) |
| Water Consumption per Cycle | 10 L (Eco program) |
| Number of Place Settings | 12-14 |
| Noise Level | 46 dB(A) |
| Energy Efficiency Class | A+ (EU scale) |
| Number of Programs | 6 (Eco, Intensive, Normal, Quick, Soak, Glass) |
| Drying System | Passive condensation drying |
| Delay Timer | Yes, up to 24 hours |
| Child Lock | Yes |
| Interior Material | Stainless steel |
| Filter Type | Self-cleaning with microfilter |
| Available Spare Parts | Yes (racks, filters, spray arms, door gasket) |
| Repairability Index | 7.5 / 10 |
| Warranty | 2 years |
Frequently Asked Questions - PD 114 XE Philco
How do I install the dishwasher?
Ensure the appliance is level and connected to a cold water supply (3/4 inch hose). The drain hose must be connected to a siphon or sink drain. Electrical connection must be to a grounded socket. Refer to the installation manual for detailed steps.
What detergents are recommended?
Use standard dishwasher detergent (powder, gel, or tabs). For best results, use a rinse aid and salt if your water is hard. The dispenser holds up to 40g of detergent.
How do I clean the filters?
Turn off the appliance. Remove the lower spray arm and then unscrew the filter assembly (turn counterclockwise). Rinse under running water and scrub with a soft brush. Replace and lock. Clean monthly to prevent clogs.
Why is the dishwasher not draining?
Check if the drain hose is kinked or blocked. Clean the sink strainer and ensure the garbage disposal (if present) is not clogged. Also, clean the drain pump filter located at the bottom of the tub. If persists, call service.
What do the error codes mean?
Common error codes: E1 (water inlet issue), E4 (overflow), E7 (heating failure). Consult the manual for a full list. Most errors can be reset by unplugging for 30 seconds.
How energy efficient is this model?
It is rated A+ on the EU energy label. On the Eco program, it consumes about 0.95 kWh and 10 L of water per cycle, making it economical for daily use.
Can I use tablets instead of powder?
Yes, all-in-one tablets (e.g., Finish All-in-1) are compatible. Place them in the detergent dispenser and close the cover. Ensure the rinse aid compartment is still filled for optimal drying.
How do I descale the dishwasher?
Use a commercial dishwasher descaler or citric acid. Run a high-temperature program (e.g., Intensive) with the descaler in the detergent dispenser. Descale every 6 months in hard water areas.
What is the maximum number of place settings?
The dishwasher has capacity for 12-14 place settings, suitable for a family of 4-5. Load plates in the lower rack and cups/glasses in the upper rack.
Where can I find spare parts?
Authorized spare parts are available from Philco service centers or online retailers. Common parts like filters, spray arms, and racks are easy to replace. Use the model number PD 114 XE for compatibility.
User questions about PD 114 XE Philco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual PD 114 XE - Philco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PD 114 XE by Philco.