Palladium Vintage P-700 - Receiver DAP-Audio - Free user manual and instructions
Find the device manual for free Palladium Vintage P-700 DAP-Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | AM/FM Stereo Receiver |
| Brand | DAP-Audio |
| Model | Palladium Vintage P-700 |
| Dimensions (W x H x D) | approx. 430 x 140 x 320 mm |
| Weight | approx. 8.5 kg |
| Power Consumption | 120 W (max) |
| Power Supply | AC 230V / 50Hz |
| Output Power (RMS) | 2 x 30 W (8 ohms) |
| Frequency Response | 20 Hz – 20 kHz ±1 dB |
| Inputs | Phono (MM), AUX, Tape, Tuner |
| Outputs | Speaker A/B, Headphone, Tape Rec |
| Tuner Bands | FM, AM (MW) |
| Signal-to-Noise Ratio | ≥ 70 dB (line) |
| Total Harmonic Distortion | ≤ 0.5% |
| Speaker Impedance | 4 – 16 ohms |
| Main Functions | Volume, Balance, Bass, Treble, Loudness, Source Select |
| Audio Output | Stereo, Mono, Reverse Stereo |
| Cleaning | Use a soft, dry cloth. Avoid solvents. |
| Safety | Do not expose to moisture. Ensure proper ventilation. |
| Spare Parts / Repairability | Contact authorized service centers for parts. |
Frequently Asked Questions - Palladium Vintage P-700 DAP-Audio
How do I connect my turntable to the Palladium Vintage P-700?
Connect your turntable to the Phono input. Ensure the turntable has a moving magnet (MM) cartridge. If not, you may need a preamp.
What is the maximum power output of this receiver?
The receiver delivers 2 x 30 watts RMS into 8 ohms, sufficient for most bookshelf speakers.
Can I use speakers with 4 ohms impedance?
Yes, the receiver supports speaker impedance from 4 to 16 ohms. Ensure proper ventilation when driving 4-ohm loads.
How do I clean the receiver?
Unplug the unit and wipe the surface with a soft, dry cloth. Do not use chemical cleaners or water.
How to set up the FM antenna?
Connect the supplied FM wire antenna to the FM ANT terminal. Extend it for best reception. For AM, use the loop antenna.
Why is there no sound from the speakers?
Check that the Speakers A or B button is pressed, the volume is turned up, and the correct source is selected. Also verify speaker connections.
What does the 'Loudness' button do?
The Loudness function boosts bass and treble at low volume levels to compensate for human hearing, giving a fuller sound.
Can I record from the receiver?
Yes, use the Tape Rec output to connect to a tape deck or other recording device. The output is fixed level.
Where can I find spare parts?
Contact DAP-Audio authorized service centers or check online retailers for vintage parts. Some components may no longer be available.
Is the receiver safe to leave on all the time?
While the receiver is designed for continuous use, it is recommended to turn it off when not in use to save energy and extend lifespan. Ensure adequate ventilation.
User questions about Palladium Vintage P-700 DAP-Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual Palladium Vintage P-700 - DAP-Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Palladium Vintage P-700 by DAP-Audio.