IF-4-X - Cooker FAGOR - Free user manual and instructions
Find the device manual for free IF-4-X FAGOR in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Built-in Gas Hob |
| Brand | Fagor |
| Model | IF-4-X |
| Number of Burners | 4 |
| Burner Configuration | 1 Triple Crown, 3 Standard |
| Ignition Type | Automatic Electronic Ignition |
| Safety Device | Flame Failure Safety (Thermocouple) |
| Material | Stainless Steel |
| Dimensions (W x D) | 590 x 520 mm |
| Cut-out Dimensions (W x D) | 560 x 490 mm |
| Net Weight | 8 kg |
| Gas Type | Natural Gas (G20) / LPG (G30) - Convertible |
| Energy Input | Max 11 kW (sum of burners) |
| Control Knobs | Front Panel, Push-Button Ignition |
| Cleaning | Removable Pan Supports, Easy-Clean Enamel |
| Warranty | 2 Years |
Frequently Asked Questions - IF-4-X FAGOR
How do I install the Fagor IF-4-X gas hob?
Installation must be carried out by a qualified technician. Ensure the cut-out dimensions (560x490 mm) are accurate. Connect to the gas supply using the appropriate fitting, and verify the gas type. The hob must be sealed to the worktop with the supplied gasket. For safety, the electrical power must be disconnected before installation.
How do I convert from natural gas to LPG?
To convert from natural gas (G20) to LPG (G30), you need to replace the burner injectors and adjust the bypass screws. The injectors are provided in the conversion kit. Refer to the manual for the correct injector sizes for each burner. After conversion, adjust the minimum flame setting using the bypass screw. Always check for gas leaks after conversion.
The ignition is not working, what should I check?
First, ensure the power supply is connected and the hob is plugged in. Check that the burners are assembled correctly. Clean the spark plug and burner cap to remove any residue. If the ignition still fails, the spark plug may be faulty or the ignition module damaged. Contact a service technician for repairs.
How do I clean the hob properly?
Allow the hob to cool completely. Remove pan supports and burner caps. Clean the stainless steel surface with a mild detergent and a soft cloth. Avoid abrasive cleaners that can scratch the surface. Burner caps and pan supports can be washed in warm soapy water. Ensure all parts are dry before reassembling.
The flame is uneven, how to adjust?
Uneven flames are often due to clogged burner ports. Clean the burner cap and burner head thoroughly. Check that the burner cap is properly aligned. If the issue persists, adjust the air shutter on the burner for a proper air-to-gas mixture. Refer to the manual for the adjustment procedure.
What is the minimum distance from the wall required?
The minimum distance from the rear wall to the hob cut-out is 50 mm. For side walls, maintain at least 100 mm clearance. Ensure there is adequate ventilation. The hob should not be installed above a drawer or oven without a proper insulation panel. Always follow local installation codes.
Can I use a wok on this hob?
Yes, the triple crown burner is ideal for wok cooking. It provides high and concentrated heat. Use a flat-bottomed or round-bottomed wok with a wok ring (if supplied). Ensure the wok is stable on the pan support. Do not use woks with a diameter larger than the burner to avoid overheating.
How do I replace the burner caps?
Purchase the correct burner caps from an authorized Fagor dealer. Remove the pan supports and existing caps. Place the new caps over the burner heads, ensuring they are seated correctly. The caps should fit snugly and align with the burner body. Test the burner operation after replacement.
The safety thermocouple trips frequently, why?
Frequent thermocouple tripping may indicate a weak flame or dirty thermocouple. Clean the thermocouple tip with a soft cloth. Ensure the burner ports are clean and the gas pressure is correct. If the problem continues, the thermocouple may be faulty and needs replacement by a professional.
Where can I find spare parts?
Spare parts such as burner caps, knobs, injectors, and thermocouples are available through authorized Fagor service centers or online stores. Use the model number IF-4-X when ordering. For warranty replacement, contact the retailer or Fagor customer support.
User questions about IF-4-X FAGOR
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Cooker in PDF format for free! Find your manual IF-4-X - FAGOR and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IF-4-X by FAGOR.