Vigor 2500We - Router Draytek - Free user manual and instructions
Find the device manual for free Vigor 2500We Draytek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | ADSL2+ Wireless Router |
| Model | Vigor 2500We |
| Brand | Draytek |
| Dimensions | 220 x 160 x 35 mm (approx.) |
| Weight | 0.5 kg (approx.) |
| Power Supply | DC 12V 1A |
| WAN Interface | 1x RJ-11 (ADSL2+) |
| LAN Interface | 4x RJ-45 10/100 Mbps |
| Wireless Standard | IEEE 802.11b/g |
| Wireless Security | WEP, WPA, WPA2 |
| Firewall | SPI, NAT, DoS protection |
| VPN Support | PPTP, L2TP, IPSec pass-through |
| QoS | Bandwidth management |
| LED Indicators | Power, DSL, WLAN, LAN ports, WPS |
| Reset Button | Yes (factory reset) |
| Temperature Range | 0°C to 45°C |
| Humidity | 10% to 90% non-condensing |
| Cleaning | Wipe with a dry, soft cloth. Do not use liquid or aerosol cleaners. |
| Spare Parts Availability | Contact Draytek support for replacement parts. |
| Repairability | No user-serviceable parts inside. Refer to qualified service personnel. |
Frequently Asked Questions - Vigor 2500We Draytek
How do I reset the Draytek Vigor 2500We to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds until the Power LED flashes. Release the button; the router will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. Default username is admin and password is admin (or blank). Check the sticker on the router.
How can I set up wireless security on the Vigor 2500We?
Log into the web interface, go to Wireless LAN > Security. Select WPA2-PSK, enter a strong passphrase, and apply changes.
Does the Vigor 2500We support ADSL2+?
Yes, it supports ADSL2+ and is backward compatible with ADSL and ADSL2.
How do I update the firmware?
Download the latest firmware from Draytek's website. Go to System Maintenance > Firmware Upgrade in the router's web interface, select the file, and click Upgrade. Do not power off during upgrade.
Can I use the Vigor 2500We as a switch or access point?
Yes, you can disable the DHCP server and connect via LAN port to use it as a switch. To use as an access point, connect via LAN and enable wireless, but disable routing functions.
What should I do if I forget my router password?
Perform a factory reset using the reset button. This will erase all settings and restore default credentials.
How many wired devices can I connect?
The router has 4 LAN ports (10/100 Mbps). You can connect up to 4 devices directly or use a switch to expand.
Does the router support VPN passthrough?
Yes, it supports PPTP, L2TP, and IPSec passthrough. You can also configure VPN server for remote access.
Where can I download the user manual?
You can download the PDF manual from notice-facile.com or the Draytek support website for free.
User questions about Vigor 2500We Draytek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual Vigor 2500We - Draytek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Vigor 2500We by Draytek.