ACR1000A-R-R2 - Switch Black Box - Free user manual and instructions
Find the device manual for free ACR1000A-R-R2 Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Managed Rackmount Switch |
| Model Number | ACR1000A-R-R2 |
| Ports | 24 x 10/100/1000 Mbps RJ45 + 4 x SFP+ |
| Form Factor | 1U Rackmount |
| Dimensions (W x D x H) | 17.32 x 10.24 x 1.73 in (440 x 260 x 44 mm) |
| Weight | 5.5 lb (2.5 kg) |
| Power Supply | AC 100-240V, 50-60Hz, 40W max |
| Cooling | Internal fan, airflow front-to-back |
| Management | Web GUI, CLI, SNMP v1/v2c/v3 |
| Switching Capacity | 56 Gbps |
| MAC Address Table | 16K entries |
| VLAN Support | 802.1Q VLAN up to 256 VLANs |
| Security Features | 802.1X, ACL, Port Security, DHCP Snooping |
| Maintenance | Firmware upgrade via TFTP/HTTP, factory reset button |
| Cleaning | Power off, use dry cloth; avoid liquids |
| Operating Temperature | 32°F to 113°F (0°C to 45°C) |
| Storage Temperature | -40°F to 158°F (-40°C to 70°C) |
| Humidity | 10% to 90% non-condensing |
| Compliance | FCC Class A, CE, RoHS |
| Warranty | 1 year limited |
Frequently Asked Questions - ACR1000A-R-R2 Black Box
How do I perform a factory reset on the Black Box ACR1000A-R-R2?
Use a pointed object to press and hold the Reset button on the front panel for about 10 seconds until the system LEDs blink. This restores factory defaults including IP address.
What is the default IP address of the switch?
The default management IP is 192.168.1.1 with subnet mask 255.255.255.0. Access via web browser at that address.
How can I update the firmware?
Download the latest firmware from the Black Box support site. Then log into the web interface, go to Maintenance > Firmware Upgrade, choose the file via TFTP or HTTP, and apply.
Does the switch support PoE?
No, the ACR1000A-R-R2 does not provide Power over Ethernet. Use separate injectors if needed.
How do I enable VLANs?
Create VLANs in the web interface under VLAN > VLAN Configuration. Assign ports as tagged or untagged for 802.1Q VLANs.
What do the LED indicators mean?
PWR solid green: power OK. Link/Act green: link established, blinking: activity. Speed light indicates 1000Mbps (green) or 10/100Mbps (off).
Can I mount this switch on a wall?
It is designed for 19-inch rackmount only. Wall mounting is not recommended due to ventilation requirements.
How to configure link aggregation?
Go to Port Management > Link Aggregation, create a LAG group, add member ports, and set LACP mode if needed.
What is the maximum cable length for Ethernet ports?
For RJ45 ports, the maximum cable length is 100 meters (328 feet) using Cat5e or better.
The switch is overheating. What should I do?
Ensure proper airflow: front-to-back, no obstructions. Check that fans are spinning. Reduce ambient temperature below 45°C. Clean air vents.
User questions about ACR1000A-R-R2 Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual ACR1000A-R-R2 - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ACR1000A-R-R2 by Black Box.