DN-7053-1 - Network card / adapter Digitus - Free user manual and instructions
Find the device manual for free DN-7053-1 Digitus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Card / Adapter |
| Brand | Digitus |
| Model | DN-7053-1 |
| Interface | PCI Express |
| Ports | 1 x RJ-45 |
| Data Transfer Rate | 10/100/1000 Mbps (Gigabit Ethernet) |
| Compliance | IEEE 802.3, 802.3u, 802.3ab |
| Supported Operating Systems | Windows, Linux, macOS |
| Dimensions (W x D x H) | 120 x 80 x 20 mm (approx.) |
| Weight | 50 g (approx.) |
| Power Consumption | 2.5 W (max) |
| LED Indicators | Link/Activity, Speed |
| Jumbo Frame Support | Yes (up to 9 KB) |
| Wake-on-LAN | Supported |
| Flow Control | IEEE 802.3x |
| Auto MDI/MDI-X | Yes |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Certifications | CE, FCC, RoHS |
| Package Contents | Network card, low-profile bracket, driver CD, manual |
Frequently Asked Questions - DN-7053-1 Digitus
How to install the Digitus DN-7053-1 network card?
Power off your computer, open the case, insert the card into an available PCIe slot, secure it, close the case, and boot up. Install the drivers from the included CD or download from Digitus website.
Which operating systems are supported?
The card supports Windows (7, 8, 10, 11), Linux (kernel 2.6+), and macOS (10.9+).
Why is my network card not detected?
Ensure the card is properly seated in the PCIe slot. Check BIOS settings to enable the PCIe slot. Try a different slot. Update drivers.
How to enable Wake-on-LAN?
Install the driver, open Device Manager, find the network adapter, open Properties, go to Power Management tab, enable Wake-on-LAN. Also enable in BIOS.
What is the maximum data transfer speed?
The card supports 10/100/1000 Mbps (Gigabit Ethernet). Actual speed depends on switch/router and cabling.
Does the card support jumbo frames?
Yes, it supports jumbo frames up to 9 KB. Configure in network adapter settings.
How to install the low-profile bracket?
Remove the standard bracket by unscrewing, attach the low-profile bracket included in the package, and reattach the screws.
Is the card compatible with PCIe 2.0 or 3.0?
Yes, the card is backward compatible with PCIe 2.0 and 3.0 slots, but it will run at the highest speed supported by the slot.
How to clean the network card?
Power off and unplug the computer. Use a soft, dry cloth to gently clean the card. Avoid liquids. Reinstall if necessary.
Where can I find the latest drivers?
Visit the Digitus support website, search for model DN-7053-1, and download drivers for your operating system.
User questions about DN-7053-1 Digitus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card / adapter in PDF format for free! Find your manual DN-7053-1 - Digitus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DN-7053-1 by Digitus.
