Trident 59082 - Fan Casablanca - Free user manual and instructions

Product Type	Ceiling Fan
Brand	Casablanca
Model	Trident 59082
Fan Diameter	52 inches
Motor Type	Direct Drive (WhisperWind®)
Number of Speeds	3
Reversible Motor	Yes (for summer/winter operation)
Light Kit Included	Yes (integrated LED)
Control Method	Remote control included
Mounting Type	Downrod (standard)
Voltage	120V AC
Weight	20 lbs (9 kg)
Warranty	Limited Lifetime
Cleaning Instructions	Wipe with a damp cloth; do not use abrasive cleaners
Installation	Requires ceiling support bracket and electrical wiring
Safety	Always turn off power before installation or maintenance
Replacement Parts	Authorized service centers for original parts

Frequently Asked Questions - Trident 59082 Casablanca

How do I install the Casablanca Trident 59082 ceiling fan?

Installation requires turning off power at the breaker, mounting the fan bracket to a ceiling support, wiring the fan to house wires (white to white, black to black, ground to ground), attaching the fan body and blades, and connecting the remote receiver.

How do I operate the remote control?

The remote controls fan speed (low, medium, high), light on/off, and reverse function. Press the corresponding buttons. Ensure batteries are installed and the remote is paired (follow manual for pairing).

How do I reverse the fan direction for winter?

Press the reverse button on the remote (or wall control) to rotate the blades clockwise for winter. This pushes warm air downward. For summer, press again for counterclockwise.

What should I do if the fan wobbles?

Check that all blade screws are tight, that blades are balanced (use included balancing kit), and that the fan is mounted securely. Contact support if wobble persists.

How do I clean the fan?

Use a soft, damp cloth to wipe blades and housing. Do not use water directly on motor. For stubborn dirt, use mild detergent. Ensure power is off.

Can I use the fan without the light?

Yes, the light can be turned off independently. The fan works normally even if the light is off or burned out.

How do I replace the LED light module?

Turn off power, remove the light kit cover, disconnect the module, and install a new one from an authorized dealer. Follow manual for specific steps.

What is the warranty coverage?

Casablanca offers a limited lifetime warranty on motor, 5 years on parts, and 1 year on finish. Light and remote components may have shorter coverage.

Why is my fan not responding to remote?

Check batteries in remote, ensure fan is powered on, and that the remote is paired. If still not working, try resetting by turning off power for 30 seconds. Refer to manual.

Can I install this fan on a sloped ceiling?

Yes, with appropriate sloped ceiling adapter (not included). Ensure angle does not exceed 15 degrees for proper operation.

USER MANUAL Trident 59082 Casablanca

Congratulations on purchasing your new Casablanca® ceiling fan! It will provide comfort and performance in your home or office for many years. This installation and operation manual contains complete instructions for installing and operating your fan.

We are proud of our work and appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

To register your fan, please visit: www.CasablancaFanCo.com/register

Save your receipt for proof of purchase.

What to Expect with Your Installation

Tools Needed

Mounting Options

Ceiling Bracket

WiringDownrod CanoWall Control

Blades

Operation

Maintenance

TroubleshootingGlobe

M8514-01·06/13/14·Casablanca Fan Company

What to Expect with Your Installation

www.CasablancaFanCo.com

1.888.227.2178

Pure technical diagram of a mechanical component with no visible text, numbers, or symbols

Must be able to

secure the fan to

building structure or

fan-rated outlet box

If you are unfamiliar with wiring, use a qualified electrician.

Know your wiring

Assess location

Read and Save These Instructions

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
w.3 - To reduce the risk of fire, electrical shock, or motor damage, use only Casablanca Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

CAUTIONS

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.
c.2 - Use only Casablanca replacement parts.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications.

You may need a friend to help you.

Check box to see

fan weight

Ceiling angles greater than 34^irc will require an Angled Mounting Kit. See page 4 for details.

Assess ceiling angle

Standard Downrod

for ceilings 8-10 feet high

Shorter Downrod

for fans installed close to ceiling

Longer Downrod

for ceilings 10 feet or higher

Select a downrod length

M8514-01 · 06/13/14 · © Casablanca Fan Company

Tools Needed

www.CasablancaFanCo.com

1.888.227.2178

Simple line drawing of a ladder with a checkmark label (no text or symbols on the ladder itself)

Illustration of pliers wire strippers (no text or symbols on the tool itself)

Illustration of a pair of metal pliers with a checkmark indicating selection (no text or symbols on the pliers themselves)

If you are installing multiple remote-controlled fans on the same circuit breaker,

you may need to perform a few extra steps to prevent interference or faulty operation of your remote controls.

Go to www.CasablancaFanco.com/FAQs and click "How do I properly install multiple remote-controlled fans?" for more information.

If mounting to a support structure, you will also need these tools.

M8514-01 · 06/13/14 · Casablanca Fan Company

CEILING

If you have a flat ceiling:

Hang your fan by a standard downrod (included).

OPTION 1

If you have an angled ceiling:

1. You will need a longer downrod (sold separately).
2. If your ceiling angle is greater than 34°, you will also need an Angled Mounting Kit (sold separately).

OPTION 2

Use the three steps below to determine if your ceiling angle is greater than 34°

Mounting Options
1.888.227.2178

Use Standard Mounting or Low-Profile Mounting to hang the fan from a flat ceiling.

Use Angled Mounting
to hang the fan from a
vaulted or angled ceiling.

M8514-01·06/13/14·Casablanca Fan Company

Technical illustration of a screw and a washer (no text or symbols)

Illustration of a dog holding a small animal, with two circular insets showing mechanical components (no text or symbols)

Make sure all four bumpers are still attached.

If you are unable to do this, call Technical Support at 1-888-277-2178.

Diagram of a mechanical device with a thumbs-up gesture, no visible text or symbols

To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box associated with the wall switch location.

Refer to warning w.1 on pg. 2

M8514-01·06/13/14·Casablanca Fan Company

2 Downrod

www.CasablancaFanCo.com

1.888.227.2178

graph TD
    A["Option 1 Option"] --> B["Standard Downrod for ceilings 8-10' high"]
    A --> C["Shorter Downrod for fans installed close to ceiling"]
    B --> D["Included (pre-assembled)"]
    C --> E["Included"]
    D --> F["Option 3"]
    E --> F
    F --> G["Longer Downrod for angled ceilings or ceilings 10' or higher"]
    G --> H["Sold Separately"]
    H --> I["Steps 1-5 to remove standard downrod pipe"]
    I --> J["Step 6-10 to reassemble with new pipe"]
    J --> K["Slide"]
    K --> L["Step 3"]
    L --> M["Next page skip to next page"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#ccf,stroke:#333
    style D fill:#cfc,stroke:#333
    style E fill:#cfc,stroke:#333
    style F fill:#fcc,stroke:#333
    style G fill:#fcc,stroke:#333
    style H fill:#fcc,stroke:#333
    style I fill:#fff,stroke:#333
    style J fill:#fff,stroke:#333
    style K fill:#fff,stroke:#333
    style L fill:#fff,stroke:#333
    style M fill:#fff,stroke:#333

6 M8514-01 • 06/13/14 • © Casablanca Fan Company

Remove the pre-installed setscrew so that the downrod can be inserted.

Diagram of a mechanical component with multiple curved wires and a base, no visible text or symbols

Hand tighten the downrod (at least 4-5 full turns) until it stops.

The wires can be cut, but leave at least 8" extending from the top of the downrod.

Tighten the setscrew with pliers. DO NOT HAND TIGHTEN.

8"

3/8"

M8514-01·06/13/14·Casablanca Fan Company

If the setscrew is not tightened securely, the fan may fall.

Downrod (continued)

www.CasablancaFanCo.com

1.888.227.2178

Diagram of a steaming bowl with three sticks above it, mounted on a stand (no text or symbols)

Put the wires and downrod through the canopy. Let the canopy sit loosely on top of the fan.

Line drawing of a steam fan with cooling tower and fan base (no text or symbols)

DO NOT PICK THE FAN UP BY THE CANOPY OR WIRES. Place the downrod ball into the slot in the ceiling bracket.

Line drawing of a submarine with a hand giving a thumbs-up gesture (no text or symbols)

M8514-01·06/13/14·Casablanca Fan Company

Wiring

www.CasablancaFanCo.com

1.888.227.2178

Using an orange wire connector from

the ★ hardware bag, connect the 3 grounding wires (green, green/yellow stripe, or bare copper) coming from the ceiling, downrod, and hanging bracket.

Note: To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight.

Using the blue wire connectors from the remote control hardware bag, connect the white wire from the receiver (marked "common out") to the white wire from fan. Connect the black wire from the receiver (marked "fan out") to the black wire from the fan. Connect the blue wire from the receiver (marked "light out") to the blue wire from the fan. The red wire from the receiver will not be used, it has a pre-installed wire terminator.

graph TD
    A["FROM RECEIVER"] --> B["White Signal"]
    A --> C["Blue Signal"]
    B --> D["White Signal"]
    C --> E["Blue Signal"]
    D --> F["Black Signal"]
    E --> F
    G["FROM FA N"] --> H["Black Signal"]
    I["White Signal"] --> J["Blue Signal"]
    K["Blue Signal"] --> L["White Signal"]

Using an orange wire connector from the ★ hardware bag, connect the black wire (ungrounded) from the ceiling to the black wire from the receiver (marked "live in"). Connect the white wire (grounded) from the ceiling to the white wire from the receiver (marked "neutral in" or "common in").

graph TD
    A["FROM RECEIVER"] --> B["black (live in)"]
    B --> C["back (unrounded white grounded white natural air)"]
    C --> D["FROM CEILING"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

Refer to CAUTION c.1 on pg. 2

Turn the splices upward and push them carefully back through the hanger bracket into the outlet box. Spread the wires apart, with the grounded wires on one side of the outlet box and the ungrounded wires on the other side of the outlet box.

M8514-01·06/13/14·Casablanca Fan Company

Wall Control

www.CasablancaFanCo.com

1.888.227.2178

1. Tape the provided wall control template with painter's tape at the desired installation area.
2. Drill holes inside the four corners of the template.

Note: Make sure the wall control template is level before proceeding to the next step.

1. Using a 9/64 drill bit, drill a hole in each screw cut-out on the wall control template.
2. Using a hammer, tap a drywall anchor found in the wall control hardware bag into each hole until the drywall anchor is flush with the wall.

1. Using a drywall punch saw, cut out the interior shape of the template using one of the four drilled corners as a starting point.
2. Remove the template and the cut-out section of drywall.

1. Insert the wall control into the dry wall cut out.
2. Align the screw holes in the wall control with the drywall anchors.
3. Install the cover plate using a Phillips Head screwdriver to secure the two cover plate screws found in the wall control hardware bag through the wall control and into the drywall anchors.

If you are using a outlet box for wall control installation, the wires coming from the wall control must be grounded using the attached green wire. If not placed in an outlet box, cap the green wire coming from the wall control with an included wire nut.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

M8514-01·06/13/14·Casablanca Fan Company

Canopy

www.CasablancaFanCo.com

1.888.227.2178

Technical line drawing of a mechanical component with concentric rings and a central shaft (no text or symbols)

Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown.

Lift the canopy into place so that the screw holes are aligned.

Diagram of a toilet with screwdriver and screw holder, no text or symbols present

Insert the two canopy screws found in the ● hardware bag.

Line drawing of a boat with a funnel and side-mounted platform, accompanied by a thumbs-up icon (no text or symbols)

Note: Fan style may vary.

M8514-01·06/13/14·Casablanca Fan Company

Blades

www.CasablancaFanCo.com

1.888.227.2178

Illustration of a mechanical component with a thumbs-up gesture, no text or symbols present

Your blades are shielded with Dust Armor ^® which is a nanotechnology coating that repels dust. For cleaning the fan, use soft brushes or cloths to prevent scratching. Cleaning agents may damage the finishes.

M8514-01·06/13/14·Casablanca Fan Company

Globe

www.CasablancaFanCo.com

1.888.227.2178

Position the notches in the outer rim of the globe so they line up with the tabs on the inside of the rim on the light kit.

Technical diagram of a ceiling fan with directional arrows indicating airflow or movement (no text or symbols present)

Carefully lift the globe up inside the light kit as far as it will go, then rotate the globe clockwise until it is held tightly in place by the four tabs.

See next page for fan operation instructions.

M8514-01·06/13/14·Casablanca Fan Company

Operation

www.CasablancaFanCo.com

1.888.227.2178

Before operating the wall control, press on the battery door to eject it. Unscrew the battery holder. Insert the battery, found in the control hardware bag, with the positive (+) side facing downward. Reinstall the battery holder and reinsert the battery door into the wall control.

If you are installing multiple remote-controlled fans on the same circuit breaker, you may need to perform a few extra steps to prevent interference or faulty operation of your remote controls.

Go to www.CasablancaFanCo.com/FAQs and click "How do I properly install multiple remote-controlled fans?" for more information.

Note: The remote must be paired before the fan will operate.
Within 3 minutes of restoring power to the fan, press both the Fan Off button and the 4 button for at least four seconds. Your fan will turn on at the lowest speed to indicate successful syncing. If it does not, turn off power to your fan, wait one minute then try again. If using the transmitter with multiple fans, repeat this process for each fan.

M8514-01·06/13/14·Casablanca Fan Company

Operation (continued)

Quickly press the up or down arrow to turn the lights off and on. Hold the up or down arrow to raise or dim the light level. The reverse button changes the direction that the blades turn. The power button turns the fan off and on.

The reverse button on the wall control changes the air flow pattern. In warm weather, use (a) downward air flow pattern. In cold weather, use (b) upward air flow pattern.

The Safe-Exit Program gives you about thirty seconds of light when you turn the lights off to exit the room before the lights go out. To use Safe-Exit:

- Press the fan power button off for at least three seconds to initiate the Safe-Exit Mode.

• The lights will flash for visual confirmation.

• The lights will stay on 50% brightness for 20 seconds and then begin to dim. After a total of 30 seconds, the lights will be completely off.

Note: For CFL lighting, the lights will stay on 100% brightness for 30 seconds. After a total of 30 seconds, the lights will be completely off.

M8514-01·06/13/14·Casablanca Fan Company

Maintenance & Cleaning

www.CasablancaFanCo.com

1.888.227.2178

Be sure to turn off power to the fan before performing any maintenance or relamping.

Line drawing of a hand holding a folder with a ribbon, partially stacked with layered documents (no text or symbols)

Cleaning the fan - use soft brushes or cloths to prevent scratching. Cleaning products may damage the finishes.

Casablanca fans have the power to cut your cooling costs up to 40%.

Beat the High Cost of Cooling

The air movement created by a Casablanca ceiling fan lets you set your thermostat higher and still stay comfortable. Every degree you raise the thermostat saves up to 7% on energy costs. So, you can cut back on expensive air conditioning ... and save up to 40%* on cooling. In winter, your Casablanca fan recirculates warm air and saves up to 10%* on heating bills.

* On average at low speed settings. Your savings may vary based on climate, building type and thermostat setting.

Save Energy and Money While Protecting the Environment

Congratulations! You're saving energy and money while protecting the environment by purchasing this ENERGY STAR qualified Casablanca ceiling fan! With this purchase, you are doing your part to protect the environment. Your new ceiling fan has earned the ENERGY STAR label because it meets high energy efficiency specifications set by the Environmental Protection Agency (EPA). ENERGY STAR labeled ceiling fans save energy because they have more efficient fan motors and air delivery due to more aerodynamic blade configurations. Ceiling fan models bearing the ENERGY STAR label move air

14 - 20% more efficiently than typical ceiling fan models. For more information on ENERGY STAR, visit www.energystar.gov.

M8514-01·06/13/14·Casablanca Fan Company

Troubleshooting

www.CasablancaFanCo.com

1.888.227.2178

Fan doesn't work

• Press a fan speed button (1-4).
• Check the circuit breaker to ensure the power is turned on.
• Check the wall control battery.
  • Make sure that you have paired the wall control.
  • Make sure the blades spin freely.
• Turn off power from the circuit breaker, then loosen the canopy and check all the connections according to the wiring diagram on pages 9.

Excessive wobbling

• Tighten all of the blade screws until they are snug.
• Turn the power off, support the fan carefully, and check that the hanger ball is properly seated.
• Use the provided balancing kit and instructions to balance the fan.

Remote doesn't work

• Install a fresh battery in the wall control.
• Make sure you have paired the remote.

Noisy Operation

• Tighten the blade and blade iron screws until they are snug.
• Check to see if any of the blades are cracked. If so, replace all of the blades.

If you have multiple remotes or multiple remote-controlled fans installed on the same circuit breaker and you are experiencing interference or faulty operation of your remote controls, please go to www.CasablancaFanCo.com/FAQs and click "How do I properly install multiple remote-controlled fans?" for information on how to correct this issue.

AUTHORIZED SERVICE CENTERS

For the most updated list of Casablanca Authorized Service Centers, visit www.CasablancaFanCo.com or call toll free 1-888-227-2178.

17

M8514-01·06/13/14·Casablanca Fan Company