14121806L - LED Lighting Livarno Lux - Free user manual and instructions

Product Type	LED Under-Cabinet Light
Brand	Livarno Lux
Model	14121806L
Dimensions (L x W x H)	57.7 x 3.0 x 2.2 cm
Weight	Approx. 0.3 kg (estimated)
Power Supply	230-240 V~, 50 Hz
Power Consumption	8 W
Light Source	48 integrated LEDs (non-replaceable)
Color Temperature	Not specified (estimated cool white ~4000K)
Protection Class	II (Double-insulated)
Protection Type	IP20 (indoor use only)
Max Number of Connectable Units	10 lights of same model
Max Distance Between Units	16 cm
Mounting	Wall-mounted with screws and clips (included)
On/Off Switch	Yes, on the light
Intended Use	Indoor, dry and enclosed spaces; domestic use
Safety Warnings	Electric shock risk, burn hazard, do not use with dimmer
Connection Cable Length	Not specified (approx. 1.5 m)
Warranty	36 months
Included Accessories	Mains cable, connection lead, wall plugs (2), clips (2), screws (2), assembly instructions
Replacement Parts	Not available; entire unit must be replaced if LED fails
Cleaning	Dry, lint-free cloth; unplug before cleaning
Disposal	Recycle according to local regulations; do not dispose with household waste

Frequently Asked Questions - 14121806L Livarno Lux

How do I install the LED under-cabinet light?

Measure and mark the drill holes (6 mm diameter, 30 mm depth). Insert wall plugs, screw in clips, then press the light into the clips. Connect the power cable and plug into a socket. Use a spirit level for alignment.

Can I connect multiple lights together?

Yes, you can connect up to 10 lights of the same model. Remove the cap from the connection socket, insert the connecting cable, and link each light. Ensure the distance between lights does not exceed 16 cm. Power must be off during connection.

Can I use this light with a dimmer?

No, do not use this light with a dimmer or electronic switch. It is not designed for that and may cause damage or safety hazards.

What should I do if the light does not turn on?

Check that the power cable is securely connected and the mains plug is inserted into a working socket. Ensure the ON/OFF switch is in the correct position. If still not working, contact the service center.

How do I clean the light?

Always unplug the light before cleaning. Allow it to cool completely. Use a dry, lint-free cloth only. Do not use water, solvents, or immerse in liquid.

Can I replace the LED bulbs?

No, the LEDs are integrated and non-replaceable. If the light fails, the entire unit must be replaced.

Is the light suitable for bathroom or outdoor use?

No, this light is rated IP20 and intended only for indoor use in dry, enclosed spaces. Do not expose to moisture.

What is the warranty period?

The product comes with a 36-month warranty from the date of purchase, covering material and manufacturing defects. Wear parts (bulbs) and damage from improper use are excluded.

Can I connect lights of different models?

No, only connect under-cabinet lights of the same type and model. Use only the original connecting cable supplied.

How do I dispose of the light at end of life?

Do not dispose with household waste. Take it to a local recycling facility for electronic waste. The packaging is recyclable.

USER MANUAL 14121806L Livarno Lux

Assembly, operating and safety instructions

DE AT CH

LED-UNTERBAULEUCHTE

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

DE AT CH

List of pictograms used....Page 6

Introduction......Page 6

Proper use....Page 6

Included items Page 6

Description of parts....Page 7

Technical Data Page 7

Safety Page 7

Safety advice......Page 7

Preparation......Page 8

Required tools and materials......Page 8

Preparations for use....Page 8

Fitting the light Page 8

Connecting several lights together....Page 9

Switching On/Off......Page 9

Maintenance and Cleaning......Page 9

Disposal Page 9

Information......Page 10

Guarantee Page 10

Declaration of Conformity....Page 10

Manufacturer / Service Page 10

List of pictograms used
	Read the instructions!		Observe warning and safety notices!
	This light is only suitable for indoor use in dry and enclosed spaces.		Electric shock warning!
	Volt (AC)		Danger to life and risk of accidents for infants and children!
	Hertz (frequency) For your safety
	Watt (effective power)		Caution! Risk of burns due to hot surfaces!
	Safety class II	[IMAGE]	Dispose of the packaging and device in an environmentally-friendly manner!

- Proper use

LED under-cabinet light

● Introduction

Congratulations on your new product.

You have selected a high quality product.

Please read carefully and completely

through these operating instructions. Fold out the page with the illustrations. These instructions form part of the product and contain important information about bringing the product into use and its handling. Always observe all the safety advice. Check that the correct mains voltage is available and that all the parts have been properly assembled before bringing into use. Should you have any questions or be uncertain as to how to operate the device, please get in touch with your dealer or service point. Please keep these instructions in a safe place and hand them on to a third party if necessary.

This light is suitable only for interior use, in dry and enclosed spaces. The light should be positioned within reach so that

the switch can be operated conveniently. The light can be fitted to all normally inflammable surfaces. Any use other than that described above or modification to the lamp is not permitted and may lead to damage to people or property. Moreover, there is the risk of injury or loss of life and that the lamp may develop technical faults such as short circuit or fire or give an electric shock. This lamp is intended for use only in a domestic environment.

Included items

Check that all the items and accessories are present and that the lamp is in perfect condition immediately after unpacking.

1 LED under-cabinet light, Model 14121806L
1 Mains cable
1 Connection lead

2 Wall plugs
2 Clips
2 Screws

1 Set of assembly instructions and instructions for use

• Description of parts

1 Wall plug
2 Clip
3 Screws
4 Connection socket
5 Connection cable
6 Light connection
7 ON/OFF switch
8 Power cable
9 Cap

- Technical Data

Operational voltage: 230-240V\~50Hz

Bulb: 48 LEDs

Nominal output: 8 W

Dimensions: (L x W x H)

$$ 5 7. 7 \times 3. 0 \times 2. 2 \mathrm{cm} $$

Protection class: II

Protection type: IP20

● Safety

Safety advice

The right to claim under the guarantee shall be rendered invalid in respect of damage caused by the non-observance of these operating instructions. No liability is accepted for consequent damage. No liability is accepted for damage to property or persons caused by improper handling or non-observance of the safety advice.

■ DANGER TO LIFE AND ACCI-

DENT HAZARD FOR TODDLERS AND SMALL CHILDREN! Never

leave children unsupervised with the packaging materials. The packaging material poses a

suffocation hazard. Children frequently underestimate dangers. Please always keep the product out of the reach of children.

This device may be used by children age 8 years and up, as well as by persons with reduced physical, sensory or mental capacities, or lacking experience and/or knowledge, so long as they are supervised or instructed in the safe use of the device and understand the associated risks. Do not allow children to play with the device. Cleaning and user maintenance must not be performed by children without supervision.

To avoid danger to life from electric shock

Before connecting it to the mains, always check the light, the power cable as well as the connecting cable if need be for any damage. Never use the light if you see any damage.
WARNING! Damaged power cables and connecting cables are a danger to life as you could suffer an electric shock.
Before assembly, ensure that the mains voltage available corresponds to the operating voltage necessary of the light (see „Technical Data“).
■ Never let the lamp come into contact with water or other liquids.
■ Never open or insert anything into electrical fittings or equipment. Doing this sort of thing can lead to a serious danger to life from electric shock.
- Touch only the insulated part of the plug when connecting to or disconnecting from the mains supply.
If the external flexible cable of this lamp is damaged, it may only be replaced by a special cable or a cable that is only available from the manufacturer or his service representative.
■ Only connect the under-cabinet light to the mains current using the original power cable.
Only connect original under-cabinet lights of the same type with each other. Only use the original connecting cable supplied to do so.
Connect the under-cabinet lights that are linked up together to one socket only. Make sure that you only connect a maximum of 10 linked-up under-cabinet lights of the same type to one

socket. Otherwise this might overload the connections and cables.

■ Make sure that all under-cabinet lights are linked up via connecting cables before inserting the power cable into the socket.
- Do not install the lamp on damp or conductive surfaces.
■ Do not kink the power cable.
- Do not lay the cable on sharp corners.

To avoid danger of fire and injury

RISK OF INJURY! Check every bulb and lampshade for damage immediately upon unpacking. Do not operate the light with a defective bulb or glass cover. If they are, contact the service point for a replacement.

- Allow the light to cool off completely.

- Do not look directly into the light source (lamp, LED, etc.).

■ The light bulb is not replaceable.

If the illuminant has reached the end of its life, the entire light must be replaced.

RISK OF INJURY FROM BURNS! Ensure the lamp has been switched off and allowed to cool before you touch it. In this way you will avoid the danger of burns. Light bulbs develop a great deal of heat.

- Do not operate this light with a dimmer or an electronic switch. It is not suitable for this mode of operation.

■ Never leave the light operating unattended.

- Do not allow any objects to cover the light. Fire can result from the development of too much heat.

- Do not allow the lamp or the packaging materials to lie around unattended. Plastic film or bags, Styrofoam etc. can turn into dangerous toys for children.

Working safely

■ Fit the light in such a way to ensure it is protected from damp and dirt.

■ Make careful preparations for the assembly and take sufficient time. Clearly lay out all components and any additional tools or materials

that might be required so that they are readily to hand.

- Remain alert at all times and always watch what you are doing. Always proceed with caution and do not assemble the lamp if you cannot concentrate or feel unwell.

● Preparation

- Required tools and materials

The tools and materials mentioned are not included in the delivery. The details and values given are non-binding and for guidance only.

The nature of the material depends on the individual circumstances on site.

• Pencil / Marking tool
• Screwdriver
• Electric drill
• Drill
• Spirit level

● Preparations for use

- Fitting the light

Note: Prior to installation, verify there is a socket nearby within reach of the included power cable 8.

1. Measure up the wall or mounting surface for drilling the holes. Use a spirit level to improve accuracy.
2. Mark the distance between the two mounting holes.
3. Now drill the mounting holes (ø approx. 6 mm, depth approx. 30 mm). Make sure that you do not damage any electrical cables during this operation.
4. Insert the supplied wall plugs 1 into the drilled holes.
5. Screw the clips 2 tightly using the screws 3 (see Fig. A).

6. Press the lights into the tightly screwed clips 2 (see Fig. B).

7. Insert the light connector plug of the mains lead 8 into the light connector socket 6.

8. Insert the mains plug of the mains lead into a convenient mains socket. Your light is now ready for operation.

- Connecting several lights together

CAUTION! Ensure that all the under-cabinet lights are connected before you insert the power cable 8 into the mains socket.

Note: Make sure that you only connect a maximum of 10 linked-up under-cabinet lights of the same type to one socket.

☐ Install up to 10 lights of the same model next to each other. To do so, follow steps 1-5 of the section called "Fitting the light".

Note: Make sure that the distance between the lights is not more than 16 cm.

1. Insert the connector of the power cable 8 into the light connection 6 of the first light.
2. Carefully remove the cap 9 of the connection socket 4 using a screwdriver.
3. Insert the connecting cable 5 into the connection socket 4.
4. Insert the second connection of the connection cable 5 into the light connection 6 of the next light.
5. Alternatively, you can directly connect the lights to each other by connecting the lights through the connection socket 4 to the light connection 6.
6. Insert the mains plug into the mains socket. Your lamp is now ready to use.

- Switching On/Off

☐ Switch the ON / OFF switch 7 to turn the light on or off.

● Maintenance and Cleaning

WARNING! DANGER OF ELECTRIC

SHOCK! Unplug the mains plug from the socket.

WARNING! DANGER OF ELECTRIC

SHOCK! For electrical safety, never clean the light with water or other liquids, nor immerse it in water.

• Do not use solvents, benzene or similar substances. They could damage the light.
  ☐ Allow the light to cool off completely.
  ☐ Only clean with a dry, lint-free cloth.
  ☐ Reinsert the mains plug into the socket after cleaning.

- Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities. The Green Dot is not valid for Germany.

Observe the marking of the packaging materials for waste separation, which are marked with abbreviations (a) and numbers (b) with following meaning: 1-7: plastics / 20-22: paper and fibre-board/80-98: composite materials.

The product and packaging materials are recyclable, dispose of it separately for better waste treatment. The Triman logo is valid in France only.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

To help protect the environment, please dispose of the product properly when it has reached the end of its useful life and not in the household waste. Information on collection points and their opening hours can be obtained from your local authority.

- Information

Guarantee

You receive a 36 month warranty on this product, valid from the date of purchase.

The device has been carefully produced under strict quality control.

Within the warranty period we shall rectify without charge all material and manufacturing defects. In the event of a defect arising during the warranty period, please send the device to the listed Service Centre address, making reference to the following article number: 14121806L.

Wear parts (such as bulbs) and damage caused by improper handling, non-observance of the operating instructions or unauthorised interference are excluded from the warranty.

The performance of services under the warranty does not extend or renew the warranty period.

● Declaration of Conformity CE

This product conforms to the requirements of the applicable European and national directives. Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.

Manufacturer / Service

When inquiring about your product, please have your receipt and product number (e.g. IAN 12345) ready as your proof of purchase.

Last Information Update