MCP2200 - Uncategorized Microchip - Free user manual and instructions
Find the device manual for free MCP2200 Microchip in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | USB-to-UART Bridge Controller |
| Package Type | SSOP-20 |
| Dimensions (Package) | 7.2 mm x 5.3 mm x 1.75 mm |
| Weight | 0.14 g (typical) |
| Power Supply | USB bus-powered (5 V, 500 mA max) |
| Operating Temperature | -40°C to +85°C |
| USB Standard | USB 2.0 Full Speed (12 Mbps) |
| UART Interface | Full duplex, up to 3 Mbps |
| GPIO Pins | 8 programmable GPIOs |
| Main Functions | USB to UART conversion, GPIO control, configurable baud rate, hardware flow control |
| Driver Support | Windows, macOS, Linux (CDC driver) |
| Configuration | Via PC software or external EEPROM |
| Maintenance | No user maintenance required; keep dry and static-free |
| Safety | ESD sensitive; observe standard ESD precautions |
| Spare Parts & Repairability | Not repairable as IC; replace entire component |
| General Information | RoHS compliant, lead-free |
Frequently Asked Questions - MCP2200 Microchip
What is the MCP2200?
The MCP2200 is a USB-to-UART bridge controller from Microchip, allowing microcontrollers or serial devices to communicate over USB.
What is the maximum baud rate supported?
The MCP2200 supports baud rates up to 3 Mbps (3000000 baud) with automatic baud rate detection.
Does the MCP2200 require external drivers?
On Windows, drivers are needed for legacy systems; on macOS and Linux, it uses the built-in CDC ACM driver. Microchip provides a custom driver package.
How many GPIO pins does the MCP2200 have?
It has 8 general-purpose I/O pins that can be configured via software or external EEPROM for functions like LED control or reset.
Can I use the MCP2200 with a 3.3V microcontroller?
Yes, the MCP2200 has a VDD pin that can operate from 3.0V to 5.5V, allowing direct connection to 3.3V logic with proper voltage levels.
What is the package type of the MCP2200?
It comes in a SSOP-20 (Shrink Small Outline Package) with 20 pins, suitable for surface-mount soldering.
How do I configure the MCP2200?
Configuration can be done via the MCP2200 Configuration Utility (PC software) or by writing settings to an external EEPROM (24AA02).
Does the MCP2200 support hardware flow control?
Yes, it supports RTS/CTS hardware flow control for reliable data transmission.
What is the operating temperature range?
The MCP2200 is rated for industrial temperatures from -40°C to +85°C.
Is the MCP2200 compatible with Arduino?
Yes, it can be used with Arduino boards that have UART, acting as a USB-to-serial adapter with proper wiring and drivers.
User questions about MCP2200 Microchip
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual MCP2200 - Microchip and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MCP2200 by Microchip.