HG06641A - Christmas Decoration Livarno Lux - Free user manual and instructions

Product Type	Artificial Christmas Tree
Brand	Livarno Lux
Model	HG06641A
Dimensions (Height x Diameter)	Approx. 180 cm x 110 cm
Material	Metal (stand) and PVC (branches)
Number of Sections	3 (bottom, middle, top)
Stand Type	Foldable metal stand with wing bolts
Included Accessories	Bottom section, middle section, tree top, stand, 3 wing bolts, 2 cover caps, assembly instructions
Intended Use	Indoor Christmas decoration for private households
Assembly Required	Yes, simple assembly without tools
Cleaning Instructions	Wipe with a dry cloth; do not use harsh cleaners
Storage Instructions	Disassemble in reverse order, store in original packaging in a cool, dry place
Safety Notes	Keep away from fire and heat sources; do not use lit candles; place on a flat, level surface; not a toy; keep children away during assembly
Warranty	3 years from date of purchase
Disposal	Recyclable packaging; dispose of product according to local regulations

Frequently Asked Questions - HG06641A Livarno Lux

How do I assemble the Livarno Lux HG06641A Christmas tree?

First, unfold the stand legs at a 90° angle and loosely screw the wing bolts into the holes. Remove the cover cap, place the bottom section into the stand, and tighten the wing bolts. Then insert the middle section into the bottom, and the tree top into the middle. Arrange the branches to your liking and ensure the stand is on a flat surface.

Can I use this tree outdoors?

No, this tree is designed for indoor use only. Using it outdoors may cause it to tip over in wind or be damaged by moisture.

What are the dimensions of this tree?

The tree is approximately 180 cm tall and has a diameter of 110 cm (at the widest point). It comes in three sections.

Is the tree fire-resistant?

The manual does not specify fire resistance. However, it warns to keep away from fire and heat sources and not to use lit candles on the tree.

How do I clean the tree?

Clean the tree with a dry cloth only. Do not use harsh cleaning products, water, or solvents, as they may damage the PVC branches.

How should I store the tree after the holidays?

Remove all decorations, disassemble the tree in reverse order of assembly, and store all parts in the original packaging. Keep it in a cool, dry place away from direct sunlight.

What is the warranty on this product?

Livarno Lux offers a 3-year warranty from the date of purchase covering material and manufacturing defects. Proof of purchase is required. Normal wear and damage from improper use are not covered.

Are there any small parts that could be a choking hazard?

Yes, the wing bolts and cover caps are small parts. Keep children away during assembly and do not let them play with the tree or its components.

Can I decorate the tree with heavy ornaments?

The tree is designed for typical Christmas decorations. Avoid placing excessively heavy ornaments on thin branches to prevent bending or tipping.

What should I do if a part is missing?

If any part listed in the scope of delivery is missing, do not assemble the tree. Contact the retailer or the service department (UK: 08000569216, [e-mail]) for replacement.

USER MANUAL HG06641A Livarno Lux

Black-and-white photo of a white Christmas tree with fristery, displayed on a stand (no text or symbols visible)

Black-and-white photo of a full, dark, Christmas tree with a metal stand, placed indoors near a window (no text or symbols visible)

ARTIFICIAL CHRISTMAS TREE

GB

ARTIFICIAL CHRISTMAS TREE

Operation and safety notes

SE

KONSTGRAN

GB Operation and safety notes Page 5

Diagram showing particle flow around a central particle, with arrows indicating direction (no text or symbols)

Black-and-white line drawing of a coniferous tree with dense foliage and a stand (no text or symbols)

Artificial Christmas Tree

- Introduction

We congratulate you on the purchase of your new product. You have chosen a high quality product. Familiarise yourself with the product before using it for the first time. In addition, please carefully refer to the operating instructions and the safety advice below. Only use the product as instructed and only for the indicated field of application. Keep these instructions in a safe place. If you pass the product on to anyone else, please ensure that you also pass on all the documentation with it.

- Proper use

This product is a Christmas decoration intended for use indoors in private households. Any other use or modifying the product is prohibited and can result in injuries and/or damage to the product. The manufacturer assumes no liability for damages resulting from improper use. This product is not intended for commercial use.

● Description of the parts

1 Bottom section
2 Middle section
3 Tree top
4 Wing bolt
5 Stand
6 Cover cap

- Technical data

Dimensions: HG06641A/HG06641B: approx. 180 cm x 110 cm (h x ∅) HG06723: approx. 210 cm x 120 cm (h x ∅)

Material: Metal, PVC

- Scope of delivery

Immediately after unpacking, please check the scope of delivery to ensure that it is complete and that the product and all parts are in good condition. Do not assemble the product if any of the included items listed below are missing.

1 Bottom section
1 Middle section
1 Tree top
3 Wing bolts
1 Stand
2 Cover caps
1 Assembly and safety instructions

Safety notes

PLEASE READ THE INSTRUCTIONS PRIOR TO USE! PLEASE KEEP THE INSTRUCTIONS IN A SAFE PLACE!

Never leave right!

dren unattended with the packaging material. Suffocation hazard. Keep children away from the product. This product is not a toy!

The scope of delivery contains some small parts. They could pose a lethal hazard if they are swallowed or inhaled.
- Keep children away from the work area when the product is being assembled.
■ Dispose of packaging material properly.
■ Attention! Keep away from fire. Do not place the product near fires or other heat sources such as radiators or other devices which produce heat.
- Do not use lit candles to decorate the tree!
■ The product is not a climbing frame or toy!
- Place the product on a flat, level surface. Otherwise, the product could tip over.
- Only use the product indoors. If placed outdoors, a gust of wind could cause the product to tip over.

- Assembly

Note: Remove all packaging material from the product.

☐ Fold out the supporting legs of the tree stand 5 at a 90° angle to each other and screw the wing bolts 4 loosely into the drill holes provided for this purpose (see Fig. A).
☐ Remove the cover cap 6 (see Fig. B)
Place the bottom section 1 in the tree stand 5 and tighten the wing bolts 4.
☐ Then, place the middle section 2 in the opening of the bottom section 1.
☐ Insert the tree top 3 into the opening of the middle section 2 (see Fig. C).
☐ Arrange all branches to your preferred display (see Fig. D).
☐ Double check that the stand 5 is placed on a flat level surface, and the tightness of the wing bolts 4, so the product is securely fixed in position.
☐ Now you can decorate the tree (see Fig E).

● Cleaning and care

☐ Never use harsh cleaning products to clean the tree. Instead, wipe it clean using a dry cloth.

- Storing

☐ Remove all decorations from the tree.
☐ To disassemble the product, follow the instructions in the "Assembly" chapter in reverse order.
□ Store all parts in the packaging.
□ Store the product in a cool, dry place.

●Disposal

The packaging is made entirely of recyclable materials, which you may dispose of at local recycling facilities.

Contact your local refuse disposal authority for more details of how to dispose of your worn-out product.

- Warranty

The product has been manufactured to strict quality guidelines and meticulously examined before delivery. In the event of product defects you have legal rights against the retailer of this product. Your legal rights are not limited in any way by our warranty detailed below.

The warranty for this product is 3 years from the date of purchase. The warranty period begins on the date of purchase. Please keep the original sales receipt in a safe location. This document is required as your proof of purchase.

Should this product show any fault in materials or manufacture within 3 years from the date of purchase, we will repair or replace it – at our choice – free of charge to you. This warranty becomes void if the product has been damaged, or used or maintained improperly.

The warranty applies to defects in material or manufacture. This warranty does not cover product parts subject to normal wear, thus possibly considered consumables (e.g. batteries) or for damage to fragile parts, e.g. switches, rechargeable batteries or glass parts.

● Warranty claim procedure

To ensure quick processing of your case, please observe the following instructions:

Please have the till receipt and the item number (e.g. IAN 123456_7890) available as proof of purchase.

You will find the item number on the rating plate, an engraving on the front page of the instructions for use (bottom left), or as a sticker on the rear or bottom of the product.

If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.

You can return a defective product to us free of charge to the service address that will be provided

to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

Service

GB Service Great Britain

Tel.: [phone]

E-Mail: [e-mail]

Tekojoulukuusi

- Johdanto