SIRAX MT7100 - Measurement Gossen Metrawatt - Free user manual and instructions
Find the device manual for free SIRAX MT7100 Gossen Metrawatt in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Model | SIRAX MT7100 |
| Brand | Gossen Metrawatt |
| Measurement Category | CAT III 1000V, CAT IV 600V |
| Display | Backlit LCD, 4¾ digits, 50,000 counts |
| AC Voltage Range | 0.1 mV to 1000 V |
| DC Voltage Range | 0.1 mV to 1000 V |
| AC Current Range | 0.1 µA to 10 A |
| DC Current Range | 0.1 µA to 10 A |
| Resistance Range | 0.1 Ω to 50 MΩ |
| Capacitance Range | 1 nF to 100 mF |
| Frequency Range | 0.1 Hz to 100 kHz |
| Data Logging | Internal memory, USB interface |
| Power Supply | 6x AA batteries (1.5V) or rechargeable NiMH |
| Battery Life | Approx. 200 hours (alkaline) |
| Dimensions (W x H x D) | 200 x 90 x 45 mm |
| Weight | 400 g (including batteries) |
| Safety Standards | IEC 61010-1, double insulation |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20°C to +60°C |
| Humidity | 0% to 80% (non-condensing) |
| Accessories Included | Test leads, thermocouple, carrying case, manual |
| Calibration | Recommended annually |
Frequently Asked Questions - SIRAX MT7100 Gossen Metrawatt
How do I turn on the SIRAX MT7100?
Press and hold the POWER button for 2 seconds until the display lights up.
What does 'OL' mean on the display?
OL stands for Overload, indicating the measured value exceeds the selected range. Switch to a higher range.
How to replace the batteries?
Turn off the device and disconnect test leads. Open the battery compartment at the back, insert 6 AA batteries observing polarity, and close the cover.
Can I measure AC current with the SIRAX MT7100?
Yes, it measures AC current up to 10 A. Use the COM and A input jacks. For higher currents, use a clamp adapter.
How to measure resistance?
Select the Ω function. Connect the test leads across the component. Ensure the circuit is de-energized before measuring.
Is the device autoranging?
Yes, the SIRAX MT7100 features autoranging but you can also manually select ranges using the RANGE button.
What is the maximum voltage the meter can handle?
The maximum voltage is 1000 V DC/AC rms in CAT III environment. Exceeding this may damage the device or cause injury.
How to clean the meter?
Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners. Clean the input jacks if dirty.
Does the SIRAX MT7100 have a backlight?
Yes, the display is backlit. Press the BACKLIGHT button to toggle it on/off.
How to use the data logging function?
Press LOG to start logging. Data is stored internally and can be transferred to a PC via the USB port using the supplied software.
User questions about SIRAX MT7100 Gossen Metrawatt
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual SIRAX MT7100 - Gossen Metrawatt and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SIRAX MT7100 by Gossen Metrawatt.