DI/O - Digital-to-Analog Converter ART - Free user manual and instructions
Find the device manual for free DI/O ART in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital-to-Analog Converter (DAC) |
| Brand | ART (Applied Research and Technology) |
| Model | DI/O |
| Sample Rate | Up to 96 kHz |
| Bit Depth | 24-bit |
| Digital Inputs | Coaxial S/PDIF, Optical TOSLINK, AES/EBU |
| Analog Outputs | Balanced XLR, Unbalanced RCA |
| Headphone Output | 1/4" TRS with volume control |
| Frequency Response | 20 Hz - 20 kHz (±0.5 dB) |
| Signal-to-Noise Ratio | > 110 dB |
| THD+N | < 0.005% |
| Dynamic Range | > 110 dB |
| Power Supply | 9V DC external adapter (center positive) |
| Dimensions (W x D x H) | 4.3" x 5.9" x 1.75" (109 x 150 x 44 mm) |
| Weight | 1.0 lb (0.45 kg) |
| Housing | All-steel chassis, black finish |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Included Accessories | Power supply, user manual |
| Cleaning | Wipe with dry cloth, avoid solvents |
| Safety | Use only supplied power adapter; protect from moisture |
| Repairability | No user-serviceable parts; contact ART support |
Frequently Asked Questions - DI/O ART
What is the ART DI/O used for?
The ART DI/O is a digital-to-analog converter that converts digital audio signals (S/PDIF, AES/EBU, or optical) into analog outputs for use with mixers, amplifiers, or powered speakers.
How do I connect the DI/O to my computer?
The DI/O does not have a direct USB connection. Use a digital output from your computer (e.g., optical or coaxial) to the corresponding input on the DI/O.
What cables do I need?
You will need a coaxial S/PDIF (RCA) cable or optical TOSLINK cable for the digital input, and balanced XLR or unbalanced RCA cables for analog output.
Can I use headphones with the DI/O?
Yes, the DI/O features a 1/4" TRS headphone output with a dedicated volume control on the front panel.
What sample rates does the DI/O support?
The DI/O supports sample rates up to 96 kHz at 24-bit resolution.
How do I switch between inputs?
Use the input selector button on the front panel to cycle between coaxial, optical, and AES/EBU inputs.
My DI/O is not outputting sound. What should I check?
First, ensure the power supply is connected and the unit is on. Check that the input LED is lit for your selected source. Verify cables and that the source is sending a valid digital signal.
Can I use the DI/O with a home stereo?
Yes, connect the DI/O’s RCA outputs to your stereo’s analog inputs for improved audio quality from digital sources.
How do I clean the DI/O?
Use a soft, dry cloth to wipe the exterior. Do not use any liquid cleaners or solvents, as they may damage the finish or electronics.
Is the DI/O repairable?
There are no user-serviceable parts inside. For repairs, contact ART customer support or an authorized service center.
User questions about DI/O ART
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Digital-to-Analog Converter in PDF format for free! Find your manual DI/O - ART and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DI/O by ART.