FH07B - Heating Cotech - Free user manual and instructions

Product Type	Fan Heater
Model	FH07B (Art. no 18-2783, 36-5143)
Power Settings	Warm air (1000 W), Hot air (2000 W)
Fan Only Mode	Yes
Rated Voltage	230 V, 50 Hz
Indoor Use Only	Yes
Placement Requirements	Hard level surface; at least 15 cm from walls/objects; not on soft surfaces; not in bathroom/damp areas
Thermostat Control	Adjustable; automatic on/off
Safety Features	Tip-over switch, over-temperature protection, thermal fuse (non-resettable)
Usage	Normal domestic use only
Maintenance	No user-serviceable parts; do not immerse in water
Disposal	In accordance with local regulations

Frequently Asked Questions - FH07B Cotech

How do I turn on the fan heater and select the heat setting?

Turn the function selector to 'Fan' for fan only, 'I' for warm air (1000 W), or 'II' for hot air (2000 W). The indicator light will show when heating is active.

How does the thermostat work?

With the heater on, turn the thermostat clockwise to max. When the room reaches desired temperature, slowly turn it back until you hear a click (heater turns off). The heater will then automatically maintain that temperature by turning on/off.

What safety features does the FH07B have?

It has a tip-over switch that shuts off the heater if it falls over, over-temperature protection that turns off the heating element if it overheats (auto-resets when cool), and a non-resettable thermal fuse for extra safety.

Can I use this heater in a bathroom?

No, the fan heater is for indoor use only and must not be used in bathrooms, laundry rooms, or near baths or showers due to moisture risk.

What should I do if the fan heater does not start?

Check that the heater is on a level surface (tip-over switch may be triggered), that the plug is securely connected, the wall socket is live, and that the thermostat has not turned it off (set it to maximum first).

Can I use an extension cord with this heater?

No, do not use extension leads. Connect the heater directly to a mains outlet.

Where should I place the fan heater?

Place on a hard, level surface away from soft surfaces like beds or rugs. Keep at least 15 cm away from walls, furniture, and flammable objects.

What does the tip-over switch do?

It automatically shuts off the heater if it tips over to prevent fire hazards.

How do I clean the fan heater?

Never immerse in water. Unplug and wipe the exterior with a dry cloth. Do not take apart the casing.

What should I do if the thermal fuse blows?

The thermal fuse is non-resettable. If it blows, the heater cannot be reused and should be discarded according to local regulations.

USER MANUAL FH07B Cotech

Illustration of a portable electric heater with heat exchanger and control knobs (no text or symbols)

Art.no

18-2783

36-5143

Model

FH07B-UK

FH07B

Ver. 20130515

2000 W Fan Heater

Art.no

18-2783

Model

FH07B-UK

36-5143

FH07B

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. If you have any questions regarding technical problems please contact our Customer Services.

Safety

• This product must not be used by anyone (including children) suffering from physical or mental impairment. This product should not be used by anyone that has not read the instruction manual unless they have been instructed in its use by someone who will take responsibility for their safety.
  • Never let children play with the fan heater.
• The fan heater is only intended for normal domestic use and only in the manner described in this instruction manual.
  • Never cover the fan heater.
• Never use the fan heater if it is in any way damaged or malfunctioning. Do not use the fan heater if the mains lead or plug is damaged in any way.
• The fan heater should only be connected to a 230 V, 50 Hz power supply.
• Before connecting the fan heater to the mains, make sure that it is turned off and that your hands are completely dry.
• Do not use extension leads for this product. Connect it directly to a mains outlet.
  • The fan heater is intended for indoor use only.
  • Never immerse the product in water.
• The product should not be taken apart or modified. The casing houses dangerous current-carrying non-insulated components. Contact with these can lead to fire or electric shock.
• The mains lead must be changed if damaged. This is to prevent the risk of electric shock or fire and should only be carried out by the manufacturer, qualified service facility or qualified technician.

Buttons and functions

1. Thermostat control
2. Indicator light
3. Function selector
4. Tip-over switch

Function selector

O Off
Fan

I Warm air (1000 W)

II Hot air (2000 W)

Operating instructions

Placement

• Place the fan heater on a hard and level surface.
• Never place the fan heater on soft surfaces such as beds, blankets, thick rugs, etc.
• Do not place the fan heater in the bathroom, laundry room, or in the near vicinity of the bath or shower.
• Do not use the fan heater in damp or dusty environments.
• Place the fan heater some distance from furniture, curtains or other easily flammable objects. Make sure that fan heater is at least 15 cm from walls or any other objects.

Thermostat

With the fan heater turned on to one of the heat settings:

1. Turn the thermostat control clockwise to the maximum setting.
2. When the room has reached the desired temperature, slowly turn the thermostat control until it clicks. The heater and indicator light will turn off.
3. No further adjustment is required. The fan heater will then automatically turn on once the temperature goes below the setting and turn off once the set temperature is reached.

Tip-over switch

The tip-over switch is located on the bottom of the fan heater and will shut it off automatically should it tip over.

Overheating protection

The fan heater has a built-in thermal over-temperature protection device. If the over-temperature protection is triggered, the heating element is automatically shut off. When the over-temperature protection device has cooled down, the heating element will be reconnected and the fan heater will work again as normal.

As an extra safety measure the heater is also fitted with a thermal fuse safety cut-off. This thermal fuse cannot be reset, so if it has blown the fan heater cannot be reused. The fan heater should then be discarded.

Troubleshooting guide

The fan heater does not start.

The tip-over protection can be tripped if the fan heater sits on an uneven surface. Make sure the fan heater is level.Is the plug securely connected to the wall socket?Check that the wall socket is live.Has the thermostat tripped and turned off the fan heater? See the Thermostat section above.

Disposal

This product should be disposed of in accordance with local regulations. If you are unsure how to proceed, contact your local authority.

Specifications

Rated voltage 230 V, 50 Hz

Power setting I 1000 W

Power setting II 2000 W

Värmefläkt 2000 W

Art.nr 18-2783 Modell FH07B-UK

36-5143

FH07B

Postal 10 – 13 Market Place

Kingston Upon Thames

Surrey

KT1 1JZ

Deutsch